How to Replace Front Bumper 2010-2015 Lexus RX350

Shop for New Auto Parts at 1AAuto.com trq.video/c-59-cv
This video shows you how to install a new TRQ bumper cover on your 2010-2015 Lexus RX350. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!
This repair was done on a 2013 Lexus RX350 Base 3.5L Sport Utility 4-Door and the process should be similar on the following vehicles:
2010 Lexus RX350
2011 Lexus RX350
2012 Lexus RX350
2013 Lexus RX350
2014 Lexus RX350
2015 Lexus RX350
Tools you will need:
• Flat Blade Screwdriver trq.video/obqu...
• 10mm Socket trq.video/obiW...
• 21mm Socket
• Trim Tool Set trq.video/oagT...
• 1/4 Inch Ratchet trq.video/obiW...
• 3/8 Inch Drive Ratchet trq.video/obDX...
• Torque Wrench trq.video/oaLV...
• Gloves trq.video/oamy...
• Safety Glasses
• Floor Jack trq.video/oabh...
• Jack Stands trq.video/oYj-...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Lexus RX350 2nd Generation 2010-2015: • Lexus RX350 2nd Genera...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@islamicwaylive]

This is trio video good job. Oil line cooler change, alternator change and bumper change.

[@valenjtine]

Thanks this works great because I had to remove the bumper to replace the grill after backing into it.

[@martinad.5824]

Excellent video and great close-ups! Helped tremendously when replacing both headlight assemblies on our 2015 Lexus. Thanks!

[@almeller]

Thank you very much! I was wondering if you also did 2023/2024 Lexus RX front bumper. I have a question. Mine is fine, but there are small gaps under both headlights (about 2mm) and they expose the bumper edge with all its tabs which is unsightly when the car is white. I am looking for a way to raise the bumper just a bit and maybe push it just a bit towards the vehicle. So far I was unable to find anything adjustable. Thanks in advance!

[@Oneklickmedia]

Getting ready to replace my HID ballast and need to remove bumper. This help give me basic set up but this isn’t no 2010 RX350 lol. It’s more 2013-2015 RX 350 model. The 2010-2012 have a different bumper set up but I’m sure it’s similar

[@speedyscarrentals4629]

Thank you. We liked and subscribed. Was wondering if you can tell us how to replace the AFS motor / sensor on a Lexus RX350 2011. And whether we need to remove the bumper?

[@josiahfrederick1602]

Excellent video , thanks guys

[@CNHabs]

Is it possible to replace this base trim bumper with the more protruding Sportdesign bumper? Thank you!

[@pablobaker554]

How much is it going to cost me?

[@GraydonTranquilla]

What about the connector(s) to the parking sonar sensors?

[@decourceydeshong]

Hi do i also have to change my foglights off my2010

[@computergeeksrepair]

many thanks!!