Рет қаралды 4,370
Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASSL00391
This video shows you how to install a rear sway bar link on your 1996-2002 Toyota 4Runner. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• 13mm Wrench 1aau.to/oTx/1AXAA00010
• 18mm Wrench
• 18mm Socket 1aau.to/oacY/1AXAA00043
• 21mm Socket 1aau.to/oacY/1AXAA00043
• Ratchet 1aau.to/obvI/1AXAA00016
• Socket Extensions 1aau.to/obnr/1AXAA00015
• Torque Wrench 1aau.to/oazv/1AXAA00044
• Gloves 1aau.to/oVF/1AXSS00048
• Safety Glasses 1aau.to/oNS/1AXAA00343
• Silicone Paste
• Floor Jack 1aau.to/oY9/1AXAA00068
• Hammer 1aau.to/oRV/1AXAA00091
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.