How to Replace Ambient Light Sensor 1999-2006 Chevrolet Silverado 1500

Рет қаралды 26,271

Күн бұрын

Buy Now!
New Ambient Light Sensor from 1AAuto.com trq.video/ia-G...
This video shows you how to install a new ambient light sensor from TRQ on your 1999-2006 Chevrolet Silverado 1500.
This repair was done on a 1999 Chevrolet Silverado 1500 LS 4.8L Standard Cab Pickup 2-Door 4WD Automatic and the process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500
Tools you will need:
• Phillips Head Screwdriver trq.video/oboI...
• 7mm Socket trq.video/obgx...
• Trim Tool Set trq.video/oafn...
• Ratchet trq.video/obFQ...
• Gloves trq.video/oagZ...
• Safety Glasses
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 1999-2006 1st Gen: • Chevy Silverado 1999-2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 15

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@steves659 24 күн бұрын

Thanks ... worked great ... ours had just fallen down so put it back ... used a zip tie to prevent it from twisting and falling the future - cut the end of a 2nd zip tie and put at the bottom so one of the curious kids doesn't just pull it out but left about an inch so if we ever need to cut later will be easy. Next we need to check into the heater blower as seems to only work on setting 5 .... not sure if the blower itself or the controller.

@CHEECHMUN 3 ай бұрын

A most excellent tutorial. My OCD, or whatever the acronym is, would be to vacuum that dash! Subbed!!!

@heyallenify 2 ай бұрын

Thank you for this video. I was chasing an issue with my truck's automatic lighting always turning on the lights, even on the middle of the day. Following your video on lifting the dash pad, I discovered the sensor that I could see want connected to anything, and another was connected and laying down between the ductwork. Reinstalling the sensor in the empty hole and testing it resulted in a functional automatic lighting system.

@theangryangle9050 5 ай бұрын

Thanks for making projects simple and direct.

@manuelvarela17 7 ай бұрын

Good video that’s the next step to try to get the low beams lights work . Thanks

@fredbullegas3433 17 күн бұрын

Thank You !!

@Justiceinabarrel 2 ай бұрын

Absolutely insane engineering, absolutely ludicrous what the engineers thinking. All this needs to be is push snap or forward mount. Charge an arm and a leg for a photoresistor, tear your whole dash apart. Did I say its insane?

@keithtrap8693 Жыл бұрын

Once you replace the sensor do you have to do any kind of reset on the system? If so, what has to be done?

@donleevan4439 7 ай бұрын

I can't find the sensor for my 2005 Silverado anywhere! Not in the stores, not online. I need the two prong version, not four. Any help would be appreciated

@photondebuger45 8 ай бұрын

Question, can't that also fit a Sonoma? I have a 98 Sonoma that has that too it looks 100 percent like that too but I can't find "the one that fits" my truck.