How to Replace Rear Engine Mount 2005-2007 Ford Five Hundred

Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ic/1AEM...
New Transmission Mount from 1AAuto.com 1aau.to/ia/1ATM...
This video shows you how to install a new rear engine mount from TRQ on your 2005-2007 Ford Five Hundred. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.
This repair was done on a 2006 Ford Five Hundred SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2005 Ford Five Hundred
2006 Ford Five Hundred
2007 Ford Five Hundred
Tools you will need:
• 13mm Socket 1aau.to/obtD/1A...
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 8mm Socket 1aau.to/oa9R/1A...
• 15/16 Inch Socket
• Torque Wrench 1aau.to/oaDT/1A...
• Block of Wood
• Gloves 1aau.to/o5k/1AX...
• Safety Glasses
• Floor Jack 1aau.to/o4U/1AX...
• Jack Stands 1aau.to/oS9/1AX...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford 500 1st Generation 2005-2007: • Ford 500 1st Generatio...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@Xpexz]

How do you get the new rear engine motor to seat? Even with the oil pan jacked up I cant get the top guide rods to go thru enough so I can sit the bottoms ones as well. I’m not sure if I need to Jack up the oil pan more, which I’m a little worried about doing, or if I need to pry the bottom of the mount so it’ll fit the bottom guide rods thru. A response would be greatly appreciated as this is one of the only videos on the internet pertaining to this specific car with this specific issue.

[@flashzetzu3624]

This is for fwd?

[@Godisgr8always]

That looks like a lot of work 😅

[@tikihutdweller5944]

I wanted a better look at what the old motor mount looked like. Please show us next time.

[@TRQ]

+TikiHutDweller Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ