How to Replace Ignition Coils 2005-2007 Ford Five Hundred

Buy Now!
New Ignition Coil from 1AAuto.com 1aau.to/ia/1AECI00054
This video shows you how to install new ignition coils from TRQ on your 2005-2007 Ford Five Hundred. Ignition coils help your vehicle's engine run efficiently, cleanly, and smoothly. Rough running, lower than expected mileage, or trouble codes are sure signs that it's time to replace yours.
This process should be similar on the following vehicles:
2005 Ford Five Hundred
2006 Ford Five Hundred
2007 Ford Five Hundred
Tools you will need:
• Flat Blade Screwdriver 1aau.to/objd/1AXAA00013
• 18mm Wrench
• 8mm Wrench 1aau.to/ohH/1AXAA00011
• 10mm Socket 1aau.to/oa9M/1AXAA00017
• 15mm Socket 1aau.to/obtz/1AXAA00015
• 8mm Socket 1aau.to/oa9M/1AXAA00017
• Trim Tool Set 1aau.to/oaaL/1AXXX00006
• Pliers
• 15/16 Inch Socket
• 1-1/16 Inch Wrench
• Cloth Rags 1aau.to/oBX/1AXSS00035
• Dielectric Grease
• Gloves 1aau.to/o5d/1AXSS00048
• Safety Glasses 1aau.to/oWq/1AXAA00343
• Drain Pan 1aau.to/ozh/1AXAA00320
• Pick 1aau.to/oNP/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@ermyvids]

OK, I need to leave a comment about this video. Everything in this video is exactly correct dead on. I did the entire job of replacing the spark plugs and followed every step 1 at a time. I had to buy some clips for the fuel rail safety otherwise it went great. I did suck all the oil out of the spark plug holes with a vacuum on the end of a tube And I torqued my plugs to 20 foot pounds instead of 14. I just thought I’d help everybody out and thank the KZbinr for their to my project.

[@JonathanOgburn]

Thank you! Growing up, we had to buy/order a book for our make and model. Preciate you taking time to post this. Wish me luck...lol

[@nedaltrebor8553]

Watching you ratchet the positive terminal back on with that longass extention made my hair raise.

[@garyrushing3271]

Followed everything and I was able to do it myself in a few hours. EGR tube nut was the hardest part. Very good video, thank you.

[@sekrph]

excellent video.....ive done this a couple times before on my 500s but a couple steps included here should make it simpler!! great clear and concise......love all the TRQ videos!

[@birddog3130]

Beware: Had to heat the e g r nut... and a new o ring for the power steering. thanks for the video.

[@larenzogarth47]

Great content. But this is a terrible design by ford. Literally have to go through all this to change a spark plug! These engineers......

[@waiting4aliens]

You put out some great content, thank you.

[@gregcherechinsky8686]

Gonna attempt Friday Like the no short cuts

[@timothytornado2650]

Can you also use a front coil for a cylinder in the back?

[@tubewacha]

What a great video! Thank you for this. I love how you explained every step. Subscribed!

[@1038Willy]

Tks for your video, it was very helpful, i was able to do it

[@beachcity5627]

The fasho is $400 to $500 job at shop but I charge $300 to $350 and thanks for the video step by step

[@nwinawe]

Great video!

[@jeremygroff6895]

This is very helpful

[@ambroselee9811]

I did all of this and I have rattling noise when I accelerate and rough idling

[@tammymcleroy3494]

My manifold intake on my 2005ford five hundred has a hole melted in it want stay running what do you think would have been the cause thank you for any help

[@adtynkr]

What is that line on the left side at 11:32? I removed that from mine and put came like a litre of pink/orange oil. Should I be worried? How do I refill that?

[@ramboseaton7937]

Wanted to ask that I have a 2003 Chevy Silverado and my day lights are not working while I'm driving the truck once you know what is the problem

[@bugaruze6294]

17:25 how did you get it back on I can’t 😅

[@506jeff]

what an absurd amount of work to replace something that should be easily accessible

[@jameschambers2302]

What the line called that u disconnect with the 18 wrench

[@ramboseaton7937]

Wanted to know what is the problem with my Chevy Silverado 2003 my day lights are not working while I'm driving the truck

[@wowyummyyy]

L I K E 👍🏿👍🏼 💯💥💯💥💯 👍🏼👍🏿 🤩🤩🤩🤩🤩

[@tammymcleroy3494]

It's a sel Ford 2005 v6

[@user-qo1kf8rr9y]

Good info, but setting a bad example... Using chrome sockets with an impact, you trying to get someone hurt?!