How to Replace Rear Wheel Bearing & Hub Assemblies 2011-2020 Toyota Sienna

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a new wheel hub and bearing on your 2011-2020 Toyota Sienna. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
Estimated installation time for a professional technician is approximately: 1 hour 18 minutes
This repair was done on a 2011 Toyota Sienna Limited 3.5L Mini Passenger Van 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Toyota Sienna
2012 Toyota Sienna
2013 Toyota Sienna
2014 Toyota Sienna
2015 Toyota Sienna
2016 Toyota Sienna
2017 Toyota Sienna
2018 Toyota Sienna
2019 Toyota Sienna
2020 Toyota Sienna
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obPw/1A...
• Pocket Screwdriver
• Pry Bar 1aau.to/oadC/1A...
• 14mm Socket 1aau.to/ocmL/1A...
• 17mm Socket 1aau.to/ocmL/1A...
• 21mm Socket
• 30mm 12-Point Socket 1aau.to/oay/1AA...
• Needle nose pliers 1aau.to/oKa/1AX...
• Needle nose pliers 1aau.to/oKa/1AX...
• Pliers
• Ratchet 1aau.to/ocmp/1A...
• Torque Wrench 1aau.to/oboC/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oTx/1AX...
• Copper Anti-Seize
• Gloves 1aau.to/obtu/1A...
• Liquid Thread Locker
• Safety Glasses
• Silicone Brake Parts Lubricant
• Floor Jack 1aau.to/oaHh/1A...
• Hammer
• Jack Stands 1aau.to/oatw/1A...
• Pick 1aau.to/o8o/1AX...
• Punch
• Wheel Chocks
• Wire Brush 1aau.to/ozY/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@eryj1282]

Didn't you have to install the ABS sensor from the back of the assembly?

[@KPressMedia]

Does this apply to the 2016 tundra? 2wd