How to Replace EVAP Canister Vent Valve 2007-2014 Cadillac Escalade

Buy Now!
New Vapor Canister Purge Solenoid Valve from 1AAuto.com 1aau.to/ia/ACEM...
This video shows you how to install a new vapor purge valve or purge valve solenoid on your 2007-2014 Cadillac Escalade. Vapor purge valves are an important part of the EVAP system that allow the contained fuel vapors to be released into the combustion chamber under certain conditions. Modern purge valves are controlled by the vehicle’s computer system, and electronic solenoids. Failure of the valve or the control solenoid will result in an emissions trouble code that could prevent passing emissions testing.
This process should be similar on the following vehicles:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa94/1A...
• 13mm Wrench 1aau.to/oQm/1AX...
• Trim Tool Set 1aau.to/o2U/1AX...
• Pliers
• Side Cutters
• T30 Socket
• Pick 1aau.to/oId/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@robyoung3671]

I really appreciate the level of detail to a Torx T30 and 13mm wrench to save me time. Cheers brother beers 🍻🤙🏻

[@peteredgardo6868]

Do I have replace the hose also.. can I just replace purge

[@chiefrockone]

do you think this job can be done without a lift? I have ramps

[@ceasarperez8567]

The issue I'm having it the two wire plug is square in the new evap. And the one on the truck is skinny and long

[@deez6686]

What are the fail symptom?

[@ReignOfDave]

I have an 08 Escalade and it doesn’t have that same end by the fuel cap. It’s more of a nub that sits behind the fuel cap, do I require a different part ?

[@chiefrockone]

0:45 should have remove the other plastic pin first

[@agresham1982]

Great video

[@jblue4786]

Will it be the same place for an 2005 model??