Truck front wheel hub grease work|truck hub greasing| смазка для ступиц грузовиков

[@abc-eq9so]

This guy will never have dry hands, that is for sure :D

[@glumGlumm]

Those chemical do get in the skin he is exposed to getting cancers.

[@TexasGTO]

You didn't see the solvents he used to clean his hands from grease? This isn't a good thing.

[@abc-eq9so]

@@TexasGTO Don't know where I mentioned it being a good thing.

[@miskorado8315]

Sign of good mechanic.

[@EricSajid]

there is a risk of skin cancer petroleum-based products are carcinogenic

[@fujiwarabunta2312]

The new grease in the bucket looks so tasty

[@RAXITH_playz]

Soo... I'm not the only one..🙂

[@jose-zd4lb]

toxic candy

[@eduarditogonzales4485]

Oh yeah.Pensoil, almost Penzoil.

[@TheNamesArif]

now we just need a bucket of peanut butter to make pb & j sandwich

[@chandlersingh9817]

MADE FROM FRESH STRAWBERRIES 🍓😁😁

[@Foxtrot_India]

I was astonished by the fact that how much engineering is going into even a wheel

[@skilleryt477]

This indian guy is very hard working 🇮🇳🇮🇳

[@edmondcasenas2565]

Thoroughly wash on unleaded petrol gasoline to remove grease and replace a brandnew grease... So that the spare parts will last longer... Very well explained...

[@TedBackus]

i use Marine grease and it works great for packing hubs, planetary gears, or anything where water repulsion is a concern, as well as dirt

[@WayneCook306]

What sort of marine grease??

[@DM-hk8gz]

I use Crisco and it works well to repel dirt and water, and then I can use the remainder to fry dinner in

[@ergosumadrieyl2927]

I watched him disassemble it with my own two eyes and still couldn’t figure out wtf what was going. Like pieces came from nowhere, things dropped that weren’t there. Wtf😂 He’s got skills for sure

[@sachinsingh-rh6fq]

Everybody watch with their own two eyes ..it is not a big deal ..

[@ergosumadrieyl2927]

@@sachinsingh-rh6fq bitch you missed the point so stfu. Somebody might be watching it with one eye. Don’t be stupid

[@gamerthepro8006]

Legend has it that he’s still washing his hands

[@DerekGraham777]

Um if its grinding its not lack of grease its bad bearings and by the sound of them you need new ones and take it to an actual shop. Plus re greasing makes no sense there was more than enough

[@Blackoutfor10days]

🤤 ahh strawberry grease love it.

[@olivejosh7793]

Great job. Advice you to wear gloves. I had some hand skin issue due to mechanical products.

[@juanm.8335]

You can see everything hydraulic because of so much grease. That’s why he was having a hard time with it seating.

[@ThisIsDavesGarage]

mmmmm raspberry jelly. The old grease didn't look too bad though, I wonder why they're changing grease so soon.

[@maslak6926]

Her wife say to him „OHHHH YOU HAVE VERY GIMNASTIC FINGER” bahahhahaha

[@farukhsheikh7938]

I can see some people's r commenting about tightening so much but here in these hubs we have something which is called sleeves and the sleeves prevent these bearing to move freely does'nt matter how much u tight it ,it will move freely just put SIM in there and tight as much as u want and keep it free also

[@ricardocarlitotiu2383]

Hi. May I know the size of the socket, In mm. Thanks

[@chicagorc3967]

no new bearing ect? you just took the old one out and cleaned it then greased it. whats the point if your reusing the old bearing?

[@nishant3861]

Bahut shandaar...love from HP11

[@admiralgeneralAladeen]

Do we get in Vanilla flavour?

[@kartikasuci993]

Kenapa tidak melakukan pergantian bearing? Pemakaian Grease berlebihan membuat kotoran sisa breaking semakin melekat dan menyumbat putaran bearing.. kenapa pelumasan Grease tidak di campur dengan oli agar konsentrasi atau kekentalan Grease menjadi lebih baik..

[@darrinfry2251]

Is this the way to pack bearings .?

[@curierfromxibalba1155]

It didn't needed the sloppy repack, it needs new bearings and proper preload! I don't think they really understand what are they doing.

[@khamlunzou9183]

How u know ?

[@tool3769]

Everything done here was fine considering the tools used. If the bearings and races have no wear then there's no need to waste money and resources. You sound ignorant and rude.

[@curierfromxibalba1155]

@@khamlunzou9183 I'm a mechanic. Bearings is a basic concept. They need preload, they need to be tight but not crushed loose enough that they ride freely but without being loose. This person just tighten the bearing until it couldn't move

[@curierfromxibalba1155]

@@tool3769 I never mentioned tools nor lack of resources. That was a subject you brought, do not reflect in me. As for me, I'm a mechanic and I've work with less. Dunno why you call me ignorant but that doesn't matter. I don't think it was fine considering the person in the video tightened the bearing until the nut wouldn't budge. How do you know the bearings and races are fine? The video doesn't show. Also the grease looked knew when he removed the bearing, probably a job that returned. No wonder it did, considering it doesn't look like they know what are they doing.

[@tool3769]

@@curierfromxibalba1155 Silly response, but I respect it. I'm also a mechanic brother, I fix things that jiffy lubes techs like you screw up.

[@gauravv3367]

I hope he gets paid enough and gets satisfactory salary

[@moe9044]

i bet wheels be flyin off like crazy out there

[@tsarbomba8361]

Prolly in USA but not in here son.

[@moe9044]

@@tsarbomba8361 you a mf lie

[@yogendrakourav6494]

Greece bahut acchi quality ka hai bhai sahab

[@Tyranosaurus_Xer]

The old grease looks good to me

[@CUDAMTHEPGAMMINGFAKEFAKE]

I see your country doing very well

[@chaturgamer1120]

He is using very right amount of grease

[@EB4L9964]

That's one hell of a preload on them bearings. 😳

[@kartikaysingh6462]

🥰

[@nixenvines007]

Indians are Rich

[@jitendrakumar-ni4ys]

For How much time do it will last?

[@bend__]

imagine this guy driving a car, steering wheel always slippin' out of his hands :)

[@diegogutierrez536]

How much grease do I put in it??? Guy: Yes

[@amilcarz9]

😂😂😂

[@mw3gamer23]

hell the grease that was in it looked new

[@acerbicgeoff7821]

Bearings are bad. He likely repacked them before not knowing what you really do, owner complained it still made noise, so he went wild with the grease. But the bearings are still bad so they'll still grind, and likely worse now that he put a psychotic amount of preload on them

[@ВадимЛитвиненко-щ7ж]

Песка побольше нужно в подшипники. Говорят,дольше будут ходить... 👆🏼🤣🤣🤣

[@mr.extravaganja4075]

How much does it cost for one tire?

[@kunalpawale6702]

The new grease in the bucket look so jam

[@aloqtool]

Too tight are not good for bearings, I usually loosen the ties a bit and put my full trust in the safety pins, no need to use a lot of grease and no need to worry about overheating😇

[@WayneCook306]

I can see you have no idea how those hubs are designed.

[@MAN-pl8cu]

No amigo, porque lleva un casquillo separador que hace de tope. Yo tengo un MAN y lo hago como tú dices, pero el mio no lleva casquillo. Saludos.⁰

[@zenarioneto]

Muito bom ver o capricho desse cara

[@shahnwajkhan9099]

Wa dildar ustad ji

[@kaziks87]

Guy must be owner of grease factory.

[@RBFR01]

wheel bearings full of grease and dirt great for the life of the bearing...

[@TUNG.13]

👍👍👍

[@TheBlaert]

Holy preload Batman

[@mdjafir7508]

Good work had work

[@ЕвгенийЖеня-е4п]

В Пакистане смазка только красного цвета? 😊

[@UniqueThings18]

This is India

[@ЕвгенийЖеня-е4п]

@@UniqueThings18 сори!

[@valentineambrose3929]

There was plenty enough grease to begin with. He then cleans it and puts 10x more grease. Like he went overboard with the grease yo.

[@CUDAMTHEPGAMMINGFAKEFAKE]

i'm a mechanic in vietnam

[@Onceuponatime12348]

Strawberry flavor looks tasty

[@Makhi786]

What he did just open and close what was the issue

[@antongyrt4814]

1:59 ляпота😂

[@dotadefense7259]

Dirty hands clean money 💜❤️

[@austinlane5533]

That much grease will actually cause those bearings to carry heat and wear out prematurely. Aside from that, he's getting it done.

[@warzero]

Pensol greases provides long term protection to the rolling elements over a wide temperature range.

[@DirtRoadLanding]

You can never have enough grease!

[@ImplantedMemories]

@@DirtRoadLanding wrong

[@lennardkramer5758]

@@DirtRoadLanding right !!!

[@herbertalfredbecker3196]

Das ist kein Mechaniker, sondern ein Schuster. Wenn er vor dem Demontieren der Bremstrommel die Bremsen zurückgestellt hätte, wäre die Bremstrommeln leichter heruntergegangen. Das vordere Radlager fällt in den Dreck, beim Herausschlagen des hinteren Radlagers lag dies auch im Staub. Neues Fett repariert nicht. Das alte Fett sieht noch gut aus. Ferner müssen Kegelrollenlager eingestellt werden. Das geschieht durch hauchdünnen Distanzscheiben, die bei alten Lagern dann weggenommen werden. Ferner läuft die Radnabe nach dem Anziehen mit dem Rohr viel zu schwer.

[@hughjanus6630]

Why do they use grease? Here in the states we use oil in everything that I've ran into. Just seems more likely to have a bearing burn up.

[@rromero9763]

Trailers use grease in the United States specifically Canadian grease tolerate very hot temperatures

[@hughjanus6630]

@@rromero9763 well every trailer I've worked on has been oil bath

[@noble_xx1000]

most japanese/ Asian market trucks run grease in the hubs. I've only seen European and American axles run oil

[@rromero9763]

@@noble_xx1000 Hyundai trailers but thousands of American trailers use grease because very easy to maintain and leaks less because higher viscosity

[@tool3769]

Here in the states it doesn't matter if it's grease or oil to be honest, these guys here don't maintenance their trucks regardless. Can't tell you how many blown hubs and ruined spindles I've seen from lack of care alone.

[@nav_more]

Неужели сложно одеть перчатки?

[@xsozx]

Снял подшипники,убрал старую смазку помыл, смазал, поставил обратно, смысл ? Из-за смазки выработка подшипников никуда не уйдёт)

[@Colenuiogyrez]

Выработки нет, это просто профилактическая смазка, раз в 100-200 тыс км нужно проводить, а в их регионе где сухо и много пыли ещё чаще

[@2t231]

@@Colenuiogyrez там старая смазка даже цвет не потеряла, не говоря уже про пыль и прочее.

[@thomaslieven8447]

Ongoing use of horns….would drive me crazy

[@ИванИванов-л3ж3б]

Это когда дедушка работает на гуталиновой фабрике

[@Flako92]

Got to love the master techs in the comments.

[@loknathsaha.6264]

Nice

[@dcvlogs693]

Good job

[@sushilraikwar4774]

Relationship also want as like repair.

[@254lele]

that grease look delicius

[@yourlocalRx]

right issue , wrong solution 😅

[@penguinscipper4100]

Ебать он туда смазки наложил конечно )))) полная ступица + в подшипники забил ))) Подшипники забиваешь смазкой, немного в ступицу и этого более чем достаточно. При таком количестве смазки как она набил - большую ее часть выкинет со ступицы в тормоза и подшипники перегреются.

[@cyberbot7624]

Когда он разбирал там вообще смазка чистая была как новая зачем он всю эту работу проделал не понятно еще и пол ведра смазки в пустую захуярил сразу бы тормозной барабан набил доверху двумя ведрами))

[@penguinscipper4100]

@@cyberbot7624 Да пиздец не говори 😂😂😂

[@jvstAsYouAre]

Timestamp for gunk action plx

[@naumanahmadtariq8717]

There was enough grease already.

[@Sajidkhan-of1uv]

Sir hum bhi kaam karte hai truck ka btao jarurat ho to

[@BlackStoneSlayer]

Pakistanis ka India ma kya kaam.

[@chrisleggett685]

All that work and he left the worn out brake shoes on.

[@الحمدلله-ح8غ3ش]

لا اله الا الله🌸

[@eliasperformance8560]

You dont have to wonder, why there is dirty ground water.

[@sarthaks2354]

That's petrol or diesel 😂😂u can't clean these parts with water otherwise it would rust

[@TheX3ms]

is that bearing realy need that much of grease?? Kind too much for me..😅

[@arsalankhan622]

I don’t understand why they are doing it in the first place. The colour of the used grease tells me that it was not even driven 1000km. I can say that because the quality of grease used in our countries is so bad that it would turn black after 100km. The only thing I can think of is that the previous job didn’t solve the problem and neither would this. It needs new bearings.

[@rishabhsharma-sg3rq]

Grease looks like not good quality.

[@arbit3r]

How can you tell?

[@avainashparav2701]

U r absolutely right. It's red gel greese. Savsol company

[@sivadaspallippurath1081]

Excellent💯👍👏

[@JorgeRodriguez-po7kx]

Definitely 😁

[@syedboy1227]

Its already lubricated

[@lucasdc8385]

Pensei que estava fazendo suco ou algo do tipo 😃

[@vicenth96]

muito pouca graxa , precisa de mais graxa hahahahaha

[@Mechanicboykaranpur]

जितनी देर में ड्रम बार निकालते हो ना इतनी देर में हम फिट कर देते हैं

[@승준박-j9n]

duble lubricant..density input.. well.. better..than watery in general so that wealthy..

[@hbdys]

i think it needs more grease

[@tomholand5771]

Перегретый подшипник нельзя повторно использовать.

[@_salaryman_]

Они об этом не знают.

[@СергейКоралев-п3н]

так цвета побежалости нет, смазка даже не горела ,откуда он перегрет?

[@anan7s294]

4:07 “Arre maa ….. …. h, bataye re ho!” 😂🤣

[@amitnagar6492]

Agar yah Nahin Hote To Hamara Desh Nahin chalta majak mat Uda

[@anan7s294]

@@amitnagar6492 mazak nahi uda raha, demonetisation k time ek meme video viral hua tha iss dialogue se. Usi k jaisa dikhne wala aadmi is video mein h. Bs yahi Bol rha hu.

[@amitnagar6492]

Theek hai bhai mujhe pata nahi tha

[@oinvincibleo]

That kerosine oil ruined the grease..cause mechanic didn't dry it or clean it properly....lol.

[@lukeron]

MYTHS ABOUT HYDRAULIC OILS My Self Yash Bhatt, Chemical & Lubricant Engineer (Lukeron Lubricants India). I want to tell you so many things as per your video. MYTH About Hydraulic Oils 1. As you say the Yellow oil is having a Dust particles and other contamination so you are wrong in this. The Yellow oil means This Oil Having wide range of Additives such as ZDDP, AW, MPS. Yellow color doesn't means it's a bad quality. 2. As you say that about viscosity right. In The White Tube Oil is Hydraulic HLP ISO 32/46 and In a Yellow Tube Oil Viscosity is a ISO 68. That's why there is difference in flow rate. 3. Viscosity depends on application and NAS value. Please do not claim wrong information, first you go and analysis. 1. Base Oil Types : Naphthenic & Paraffinic 2. Base Oil Groups : Group 1 - SN70, SN150, SN300, SN400, SN500, SN600 (Viscosity Index range - 95 to 105) (Appearance - Yellowish) 3. Group 2 - N70, N150, N300, N400, N500, N600 (Viscosity Index Range - 110 to 135) (Appearance - Bright & Clear) 4. Group 3 - cSt 2, cSt 3,4,6,8.

[@Facts-oo8dv]

Pls use gloves

[@CUDAMTHEPGAMMINGFAKEFAKE]

I'm from Việt Nam

[@pratikkanekar1752]

oil seal nahi mara bhaine

[@AndreSantos-ss8gi]

❤❤❤❤❤🎉🎉

[@user-ij9il3kp9s]

Boss...Guy come on iv got half day job 4u in Mc Donalds..come fast. Guy....Just a couple of mins boss ill be there in ten.

[@everything3106]

Feel bad for his hand

[@jakewhitney8201]

Needs more grease!

[@АнатолийТарасенко-ы3о]

Какой смысл проделанной работы!??

[@rcmits]

id end up dropping every part on the dirt..

[@sootherelax2802]

No gloves? Damn

[@yamanmulla9063]

😊😊😊😊😊

[@aamram85]

I wouldn't touch that truck with a 10 foot pole. The amount of grease is atrocious.

[@ВитяХвойницкий-ы9г]

Велосипед я так в детстве ремонтировал......подшипники и гайки в песке качал,в бензине патом мыл ,всю эту хуйню обратно ставилно солидол ,за то новый......

[@infamousshourya6183]

The thing is this vedio and truck man both are from India and there's not even a single comment by an Indian And all the way the title of the vedio is in russian.. 🤣😅🤣 so much confusion

[@Topgearworkshop]

Wow