How can we make 1000 litre Custom Fuel Tank of Heavy duty Truck with the sheets of metal

[@YoutubeBobr]

Пока смотрел как он варит зайчики поймал. Сварщик шикарный.

[@victorurevitch8179]

Электрод не загнут- дизлайк!

[@MrGeorgin007]

Он такой же сварщик, как Обама китаец.

[@TariqMehmood-mc9tc]

ماشااللہ زبردست ھمارے پیارے پاکستان میں کتنا ٹیلنٹ موجود ھے اللہ پاک ان کو سلامت رکھے آمین

[@Сергей-п6с4о]

У нашего инженера по ТБ, инфаркт случился-бы, если-б он это увидел!

[@dailyentertainmentsvlogs5356]

It's Pakistani engineering man

[@СашСавар-ф5д]

Только от радости, это же на всю жизнь можно наказать!

[@denismikheev2034]

8:09 инженер по ТБ на заднем плане....

[@ЯНАОАККР]

@@denismikheev2034 Аха ха ха. А я думал чо за хер там лежит так удобно.

[@IlihTV66]

У нас азербайджанец хозяин камаза нанял сварщика топливный бак на 1000л заварить на машине. Сварной потребовал пропарить бак горячий кавказец послал его на х.. и полез варить сам. Итог был печальный бортовой камаза от взрыва лёг на бок, горе "сварщик " улетел на 10м за забор с летальным исходом. Труп. Вот и шутки с тб.

[@andor8215]

Боги сварки в сланцах. Тут окалина через шнуровку ботинка попадёт между пальцев, пол дня скачешь а им пофиг

[@stanislavmezentcev8068]

Да они и маской не пользуются .Иногда щиток для приличия в руках держат.

[@dmitrybulgakov6881]

Если я прихватками час поварю без маски (аргон), то лицо обгарает, а им нормально.

[@СергейПетряев-п6и]

@@dmitrybulgakov6881 они итак смуглые 😀😁

[@angrygoose5025]

Технику безопасности ребята знают, как свои 3 пальца👍

[@ksn9928]

как ни странно-надостающих пальцев у них вроде-бы нет.пока...:)

[@llirik0404]

Отличная работа!Сварщику отдельное спасибо!Береги глаза,брат

[@Макс59]

🤣🤣🤣🤣

[@Uravnitel393]

Техника безопасности на высшем уровне. Молодцы, отлично!😏

[@ЯНАОАККР]

Там уже беречь нечего. По памяти варит.

[@ЮлдашТолик]

Без маска

[@sergek2172]

@@ЯНАОАККР отчего же нечего беречь? чел на 9-й минуте спокойно смотрит на сварку, не жмурится, когда наживляет сборку. Значит, глаза ещё остались.

[@Agent_Koba]

Чудо-богатыри. Кто-нибудь переверните чувака на лежанке.

[@nefesh34]

ты тоже заметил? 😂

[@gjgjd5920]

Это походу хозяин мастерской )))

[@VoVanDOBROUMOVSKIY]

А ноги и глаза у них новые вырастают как у ящерицы? 😄👍

[@YarSva]

Видимо, мы ничего не знаем об этой нации... Я тоже подумал, что это такие терминаторы.

[@санятрутнев-н5й]

@@YarSva всё отрастает кроме мозгов😆😆😆

[@Resist_JWO_1984]

🤣🤣🤣

[@bigredc222]

Bending the radius on that plate and keeping the tank square is impressive.

[@summerforever6736]

And watch for the fingers

[@larrygibson9605]

he will be blind very soon

[@summerforever6736]

@@larrygibson9605 yes kind of stupid they could buy a auto darkening google at least! Or face shield not that expensive

[@bigredc222]

@@summerforever6736 I bet there's a shield in that shop, and he just doesn't feel like getting it.

[@ERIK52033]

@@bigredc222 yes indeed.

[@saadahsan1936]

Excellent best job by Pakistani hard worker in City of Karachi Pak.

[@СтаниславИ-с7м]

Превьюшка зачётная! Как с Алика: ожидание и реальность.

[@aneurysdelosangeles]

3:04 Im from Lawrence Massachusetts God bless all of us amen 🙏🇩🇴🇩🇴🇩🇴🙏🇩🇴🇩🇴🇩🇴🙏🇩🇴🇩🇴🇩🇴🙏🇩🇴🙏🇩🇴🙏🇩🇴🇩🇴🙏🙏🙏🙏🤝🤝🤝❤️🇩🇴🙏🇩🇴🙏🇩🇴🙏🙏🤝 3:09

[@ThermoNuclearLlama]

I can imagine this is how stuff was made back in the early 50s with older technology and simple tools. These guys are using machines that are decades old and I can assure you that they know someone local that can mend anything on any machine if it breaks.

[@whatislifebuttheenjoymento3405]

Old is gold. There is something about older stuff that technology can not beat.

[@UltimateProHacker]

They are 3 worlds countries... What you expected

[@CL-yp1bs]

Amazing work by these guys, that truck will be able to drive for thousands of kilometers on that tank!!!!

[@АлексейМудрый-р1ц]

Посмотрел видео! Ослеп от сварки 🤣

[@asdertrender7555]

Опрессовка в конце зачетная. Думал воздухом задуют и мыльной пеной проверят, ан нет ... Протечки из одного бака в другой тоже не проверяли. И так сойдет.

[@cosmodesant]

в конце видео видно что по шву пропускает но ничего страшного, зато новый бак

[@Vperedsmotryashii]

и все эти босые 7млрд через смартфоны познают о существовании коттеджей, бентли и тд... А мировое правительство понимает, что для обеспечения их всем тем, чем владеют жители Токио, Лондона и Парижа, придется выкачивать в 10 раз больше нефти, выплавлять в 8 раз больше металлов, рубить в 6 раз больше леса и тд. А запасной планеты у мировых банкиров нет. Тем более, что учредителям евро и доллара для сохранения уровня жизни достаточно 20 млн рабов-инженеров. Так что либо "босых" им придется истребить очередным ковидом, либо "бельгийцам" устроить такие платежи и налоги, чтобы они начали потреблять скромно. Либо оба варианта одновременно.

[@ВладимирИванов-з2х]

@@Vperedsmotryashii нет, просто Европа станет вторым Пакистаном, только холоднее.

[@ВладимирИванов-з2х]

Кто-нибудь знает, зачем бак пополам разделëн?

[@Vperedsmotryashii]

@@ВладимирИванов-з2х Жидкость имеет массу как любой груз. но её невозможно закрепить ремнями или болтами. Во время торможения, разгона и поворотов рулем, жидкости сохраняя инерцию передвигаются в баках (цистернах) и создают смещение центров тяжести. Перегородки предназначены для минимизации этих смещений жидкостей.

[@smithjohn3080]

Stick/flux welding outdoors, inside of a box with no welding lens, face protection, gloves, closed shoes(no flip-flops don't count), and no mask to prevent breathing in the fumes .... sounds safe must pay well 👍

[@igorrudevets6463]

Disposable people

[@rajrathore.2136]

m95qq

[@bulldogwalker]

+ child labor and with all of these they didn't got enough so they upload video and make money from videos too

[@talhatawwabghost]

boss all is ok. best. but basic HSE is a must. mandatory.

[@joginns778]

I'm amazed thes guy's don't get ark eye hot sand in the eye's feeling is horrible feeling hours of pain for nouthing then again it's the only way these guy's can earn cheep wage's health and safety in the UK would have a good time closing them down,

[@almendrasrendal8836]

Look 👍👍👍 good

[@LukasTvardek]

Pěkná práce, ale je vidět, že hodnota lidského zdraví se rovná nule

[@a-fl-man640]

good that they save money on brooms and safety requirements. might be able grow some crops in dirt of the unused floor space

[@entertainme7523]

opium?

[@ВикторНижегородский-м9ы]

При таком объёме сварочных работ следует использовать полуавтоматическую сварку.

[@الحقأبلج-ح9ص]

ما شاء الله تبارك الله ... الباكستانيين أصحاب مهارة عالية في التصنيع وبجودة عالية .. أي شئ يتعطل في باكستان يتم إصلاحة مهما كان العطل.

[@hxnn777]

glad to see you wear those safety sandals!!!

[@Resist_JWO_1984]

They won't hire workers without safety sandals.

[@jeanclaude521]

You wrote it faster….😅😅😅😅

[@ynwg]

Eine tolle Anleitung wie man in wenigen Jahren blind und mit Hautkrebs an der Straße landet.

[@notasbignow1]

You know you guys are so hard working no matter what you are making absolutely amazing process in the making of that huge fuel tank

[@liaqatson314]

hardworking, because they are from Pakistan 🇵🇰

[@MetaJamm]

Those welders are legendary blind warriors!

[@Drozdafil]

самый шаристый солнцезащитные очки одел при сварке...

[@igorsh5611]

Да был опыт как не спать две сутки

[@wernerwerner4341]

Меня всегда удивляет,какие тяжёлые работы и всегда босиком 🦶

[@dailyentertainmentsvlogs5356]

It's Pakistani man don't worry

[@Серж-нс]

Это же сварщик- ëг

[@ksn9928]

да. и пальцы на ногах вроде-бы все на месте :)

[@Nouredine538]

Alien technology

[@JorgePetraglia2009]

Just to think that many of my safety boots came from that part of the world............Other than that : amazing skills shown by these guys. Greetings from Toronto.

[@kuwaitupdates631]

Actually from beginning these workers didn't use safety shoes or googles etc. But safety is neccessary otherwise these wirkers are very talented.

[@horstmuller7512]

Safety sandals and pyjamas are required in Pakistan even when manufactureing safety boots.

[@T_ndhlovunator]

Insane welding in Ray Ban's😎

[@PVZ2_GAMING]

fake chinese made $20 rayban...!

[@rockstar-en7hf]

زبردست یار کمال کا چینل بنایا ہے مزہ آ گیا اگلی ویڈیو کا انتظار رہے گا

[@AlbertoDiGiovanni]

great masters, thank goodness they have safety sandals!

[@Resist_JWO_1984]

Safety sandals is the only safety equipment requirement in that third world shithole.

[@yashnarqaxorov7783]

Привет из Узбекистана

[@andrzejporeda7281]

Świetna jest ta wasza robota i egancki zbiornik paliwa wykonaliście pozdrawiam twórcę tego filmiku mile i serdecznie 👍👍👍👍

[@kudakwashemoyo5819]

Q

[@eminemur8083]

Şşşş Ş

[@srenyvas1]

This videos provide true insight how to make items which is day in and out. This is very good visual material those who want to pursue mechanical engineering or Diploma. In those we need permission to visit workshops now its good opportunity to go through remotely. Hats off who ever taking time and provide learning material.

[@Сергей-к9д4щ]

Суровые ребята, здоровья много

[@ksn9928]

ну это то так кажедся,ну или до поры до времени :)

[@Draibraun]

Сварщик от Бога, молодец, очень круто👍

[@andrewdow1609]

Great work......I assume it's mandatory in all factories in India that all workers wear sandals?

[@mohammadnoormauludadnan1847]

Pakistan I think.

[@tapankumarsahoo2187]

This is Pakistan, not India.

[@Resist_JWO_1984]

That would be "Safety Sandals" to you, sir.

[@ابوعبداللهبوبكر]

انتم قدوة، اعمالكم متقنة مشاء الله لا قوة الا بالله

[@Всёохорошем-р1ь]

Ребята просто молодцы 👍👍👍🇰🇿

[@АлександрТелегин-ц6д]

Не тошто вы барашки ускоглазые

[@jaanbaazzzz]

Pakistan is full of talent. Well done guys.!!

[@bill0118]

Great welder, good job with poor means. And as always the lack of safety equipments. Brave guys.

[@The6568]

I don't call ignorance bravery.

[@BACONtrucking4life]

@@The6568 it’s not ignorance it’s working with what they have same way your relatives did in the past so get your head out of your ass

[@KetoneCharger]

After watching many vids like this, i think its not that they cant afford safety shoes, but rather they dont want to wear them

[@CHMichael]

Shoes in general. Don't think there is a word for safety in their vocabulary.

[@joaoaraujo8081]

O cálculo dos vincos ficaram excelentes! O resultado uma beleza!

[@gadgeshgowdru3640]

Hollywood gu hjjj Gu B BBC.

[@mohamedidmbarek]

​o

[@Goingarage]

Какие перспективы для рынка сбыта запасных глаз пропадают!... 😃

[@lion1746]

техника безопасности? не, не слышал! интересно, когда этот чудо сварщик потеряет зрение? то что он уже дальтоник, я практически уверен!

[@СтаниславИ-с7м]

Может он - челябинец?

[@lion1746]

@@СтаниславИ-с7мстоп стоп стоп! полегче! у нас в челябинске нет таких чайников! прогресс до нас давно добрался и почти все сварщики используют хамелеоны, только самые нищие работают в простых масках, точнее не нищие, а у которых начальство жадное и тупое))) но без маски не варят даже они)))

[@АлексейИевлев-р7х]

Таким же вопросом задался )) Перый раз взял сварочный в руки, нахватался зайчиков, ночью как будто в глаза песка насыпали. На следующий день поехал за хамелеоном, т. к. ещё доваривать печку в баню надо было 😂

[@СашСавар-ф5д]

@@lion1746 Хамелеон, как раз таки испортит глаза быстрее, чем маска, как ты сказал "нищего"!

[@lion1746]

@@СашСавар-ф5д ага и 9 из 10ти стоматологов с тобой согласились))). интересно, почему тогда все профессиональные сварщики выбирают хамелеон? 🤔 наверное тупые и не посоветовались с саньком🤷‍♂️🤷‍♂️🤷‍♂️

[@marcosurra7203]

Saldare senza protezioni adeguate è pericoloso per gli occhi, pelle e polmoni. Molti anni fa, quando eseguivo un lavoro analogo, per i serbatoi usavamo lamiera zincata, nel caso della lamiera nera, veniva verniciata internamente per evitare formazioni di grumi e sfogliature che intasano il flusso gasolio. Comunque avete eseguito un buon lavoro considerando la manualità di tutto il processo. 👍

[@sergeyk.8587]

Сланцы, солнечные очки и халат. Вот что нужно сварщику. Расскажите ему что существует полуавтомат. Вот почему у них рожи чёрные, просто загарели при сварке.

[@AlexxxxBY]

А нахрена им полуавтомат с дорогой расходкой? Они электродами варят не хуже.

[@СашСавар-ф5д]

@@AlexxxxBY Не хуже? Ля ты диванный сварщик, на видео после заливки топлива видны пятна проступившие через сварку, это дефект сварки, держу в курсе!

[@AlexxxxBY]

@@СашСавар-ф5д ахахахах по твоей логике при сварке полуавтоматом деффектов и утечек быть не может? После проверки бака зачистят и заварят все места запотеваний и всего делов или пролудят швы.

[@СашСавар-ф5д]

@@AlexxxxBY Я, лишь, указал самый простой метод проверки, который, если бы ты не был слепым, автор или сварщик в видео не прошли, швы потеют, это недопустимо, ДЕРЖУ В КУРСЕ! Андрстенд, ма литл бой?

[@СашСавар-ф5д]

@@AlexxxxBY Стаж в сварки 15 лет, есть претензии? Скажи есть ли у тебя НАКС, проверю где получал, связи есть, и знаю практически всех у кого есть НАКС в России!

[@roberthallas6964]

Nice good job respect ❤

[@Stepinup]

The rank yu see at the beginning is aluminium very nicely made Looks nothing like the junk they make out of steel that rusts inside

[@kanartech]

Nice built, but the fuel pipe need to be removable secured rounded with bolt in case if it get blocked by dent or something else, secondly the baffled plates has to be double section with many and small amount of holes that can keep the fuel from moving inside the thank.

[@my83roadster4me]

Baffles are definitely a mess. Barely tacked in places and some tacks didn't join at all.

[@alphatester9394]

Nice to see that these guys taking care about their safety . PSE I guess they never heard 😂

[@ibubezi7685]

Yeah...... "OSHA would like to have a word with you"🤣

[@guessnot8015]

no need they are master of their craft.

[@smurface549]

@@guessnot8015 At least the ones that are alive long enough for being featured throughout the whole video...

[@arsalan.abdullah.12]

welding without glasses.......

[@Marcelo33070]

Cada um faz o seu melhor, nas condições que tem. Enquanto não tem condições melhores para fazer melhor.

[@AbdulWahid-wn7rv]

پاکسان کہ میڈل کلاس نوجوان بزرگ مایں بہنوں سب کو پاکستان تحریک انصاف کی جیت بہت بہت مبارک ھو❤الحَمْدُ ِلله الحَمْدُ ِلله🌷❤❤❤❤❤❤✊✊✊✊✌👍

[@KCECC-ActiveHealthyAgeing]

Admire their hard work & skill earning an honest living. The guy lying on bed in the background must be the BOSS. 😇

[@eslama4097]

چ00چچَشقش!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!°°°°°°°°°°°°°°°°``۱

[@Jakshylyk-l9t]

Сварщик молодец

[@КириллВладимирович-ю8р]

У нас по такой технологии УАЗ буханку собираю, каменный век блин)

[@Nouredine538]

Alien technology

[@bjorn_moren]

I can't believe he is looking straight into the arc welding without any protection. Hurts my eyes just watching this on KZbin.

[@kostyashudegov4588]

техника безопасности ? НЕ НЕСЛЫШАЛИ :)))

[@hardpiter6665]

Пиздец ты правильный или просто качан переполнен словами

[@bulu2semrautsemraut743]

Sehat selalu dalam mencari nafkah, ssalam dari Indonesia 🇮🇩🇮🇩🇮🇩🇮🇩💪

[@ralphedelbach]

Two fillers and pickups in the big tank? Is it divided into two separate sections? If so, why and what liquids would be stored?

[@jimmy8808]

Liquid heroine and diesel 🤣

[@МагаМагомедов-э1г9щ]

I am amazed by the working conditions very hardworking people do not observe safety regulations I wish success in business prosperity we should strive for comfortable conditions for robots

[@ksn9928]

ничего себе,парни работают в перчатках - здесь техника безопасности на высшем уровне :)

[@ИгорьЧумаков-л8к]

Зато в тапках

[@greglynch8283]

The first thing I do when I watch these videos is count their toes!

[@Resist_JWO_1984]

They probably replace workers with missing fingers, toes, arms and legs weekly.

[@Туке-й4ч]

Эн жакшы жумуш экен

[@smithjohn3080]

Also I'm sure they got all the Flux and Slag out and it will never find it way thru the fuel into the pump 🤘👌

[@TheDennisZb]

That's what you have filters for 😁

[@georgemiller8461]

Watching from Cairns Australia 🇦🇺 you guys are hard working 💪 need people like you to work in Australia

[@liaqatson314]

hardworking, because they are from Pakistan 🇵🇰

[@adrianw.1638]

good work! only wish these workers would have personal safety equipment.

[@333movie]

Sincerity and know-how a lot of effort. good like However Be sure to wear gloves Work efficiency is doubled. and Bad substances can cause disease through the skin.

[@gustavomehtce8337]

It is incredible to still see production processes, carried out by workers deprived of basic protective footwear. Bearing in mind that steel always has surface rust, even with the slightest scratch, the risk of tetanus is very high, amputation of the limb is a matter of time.

[@matt89447]

And the owner of this page is making all the $. The least they could do is ship them a few welding hoods and boots.

[@HelloHiHelloHiHello]

Shoes are cheap there, it is simply the workers don't want to wear them since it is a hot country

[@matt89447]

@@HelloHiHelloHiHello I know. I was born in Saudi Arabia. Dad worked for Standard Oil. Yes hot.

[@whenitcountsforgetaboutit9709]

Please correct me if I'm wrong, isn't watching the weld BAD for your eyes?? Aside from that, considering the working conditions, great job.

[@nelsonvecchione2621]

He will be blind soon. It's just a matter of time now. Damage has been done.

[@coyotedoasfalto300r]

I'm Brazilian I live in Brazil I follow this great job here it's known as great metallurgists congratulations on the profession you are great professionals 👏👏

[@صقرتهامه-ن4ف]

تحياتي لكم يا أهلنا في باكستان الشقيقه

[@abenildojose1689]

Show de bola, parabéns, mesmo com às péssimas condições de trabalho vocês dão conta do recado.

[@Myledailuon79]

Chào bạn cảm ơn bạn đã chia sẻ rất là hay

[@suhayl5157]

despite the fact that they are skilled workers, I still think they could have done a much better job. this tank fabrication is no rocket science and for those writers who are criticizing the baffles, this tank has 2 completely separate compartments so no need for the fuel to move. all it takes is a bit more concentration, precision and adherence to fabrication standards.

[@sidehop]

Then make your own KZbin channel show us genius.

[@WedangSusu-q3b]

Mantap 👍💪💪

[@hectorcastro8628]

Sin planos, sin herramientas sofisticadas y sin equipo de seguridad, pero bien efectivos en su trabajo, felicidades 🎊

[@kirs_3565]

asi trabajo yo aqui en argentina , por tener mas de 30 años en el oficio , pero ya nadie me da trabajo por ser viejo ya a nadie le interesa que tengas experiencia trabajando quieren gente de 20 años de edad y un par de meses de experiencia PD: tengo 53 años y las empresas ya me consideran viejo y eso que me faltan 15 años para jubilarme.

[@shakilahmad4075]

Just copying the original tank. They are general fabricator and welder not specialist. Next day they might be fabricating entirely different item and so on that is why they cant affoard dedicated tools for specific fabrication coz next time they might not be doing same

[@tshephangsithole750]

At "Tank Co" Safety is our number one concern. Thats what the big boss is saying to the customer.🥺

[@blastingweevil2968]

and how do you stop the steel tank from rusting inside since you didnt paint it with even a coat or primer ....

[@Crewsy]

Just because you didn’t see it doesn’t mean it did happen. 🤷🏻‍♂️

[@DiahRhiaJones]

@@Crewsy Probably a safe bet that it didn't happen lol

[@boppo8782]

Doing these kind of work in flip flops is priceless!

[@Resist_JWO_1984]

They're not flip flops, they're safely sandals.

[@ИванИванов-м6д2г]

Мне щипцы понравились, быстро надежно

[@youknow6968]

Pakistani craftmanship is pretty awesome. Just basic tools.

[@chrissometimes7473]

I wonder what the injury rates and life expectancy are for those workers and I also wonder about the overall quality of the tanks. I suspect the first is high and the latter two are low.

[@durnin84]

Can't beat a good ol' pair of safety sandles

[@LPXELETRICA]

ME DÁ UMA AGONIA DE VER ESSES CARAS TRABALHANDO DE CHINELO .....

[@smithjohn3080]

@ 00:19:54 Watch his hand holding the mask, this twitching while trying to hold steady is nerve damage... You can see the long term effects of not wearing a mask while doing this type of work especially in a non ventilated area

[@frontrunner3052]

Why don't you use MIG welding for welding and a small plasma cutting for hole preparation ?

[@Nouredine538]

Alien technology

[@Амир-ы7т]

не дай бог попадется такой бак на машину, даже выставить ровно листы металла, при сваривании не могут

[@ElephantSoul]

good work 👍😊

[@stefano1488]

For sure he is a great stick soldering master. But if u work like this here in Europe you'll be arrested in half a second 😀

[@wowinterestingskills]

Because of safety reasons?

[@СтарыйМерин-ц8ч]

Я КАК СВАРЩИК СО СТАЖЕМ ХОЧУ СКАЗАТЬ ХОРОШАЯ РАБОТА 👍,

[@Paul_Kair]

its very impressive how it is not leaking with this quality job...

[@TB-jl9fr]

It is! Just watch the last few seconds, the down left corner :D

[@aldotavares3798]

O resultado final é muito bom.. parabéns

[@Mitalayeka]

Thanks for the videos, am a softie compared to these guys, every time i cross the road i feel like a police officer should be there with the lights flashing and i live in a suburb but these guys are something else, at least safety glasses and shoes should be worn at the job site.

[@vevenaneathna]

very impressive. smart to keep the bolts in those fittings when welding to hold their shape. wonder if rusting is an issue since these looked like mild steel tanks? maybe just use a good fuel filter and change it often? maybe its hot enough in pakitstan/afganistan or wherever this is to evaporate the fuel and cover most of the inside and minimize rusting.

[@adrian-ik8hf]

@John Evans The stick welder will def screw up the steel too.

[@vevenaneathna]

@John Evans hmm but deisel evaporting and coating all the surfaces on the inside, and also theres not much water in the air in their climate? maybe this only works in pakistan desert heat lol

[@summerforever6736]

@@vevenaneathna its for diesel trucks!

[@summerforever6736]

Its for diesel truck!

[@AzizKhan-ud5rd]

Pakistan

[@benchikhmounis4423]

حبذا لو اعطي له وهو يلحم من الداخل انبوب تنفسي متصل بالهواء الخارجي لان تنفس هذا الاحتراق يؤدي الى اتلاف خلايا الرئة وتبقى صناعة في قمة الاتقان

[@wmclare]

using the old safety squint when welding....

[@neilsimpson79]

Nah, he's just pretending to be Clint Eastwood

[@loveasweknow]

How are those joints welds tested for leaks ? DPT ?

[@formerfarmer1718]

I see these folks in numerous videos working around all kinds off machinery wearing these long, loose, flowing garments that I’d venture our OSHA would not permit and for good reason so I’m wondering if there are many clothing-related accidents?

[@silverianjannvs5315]

Welcome to Pakistan

[@leaningr]

And all the sandals lol

[@nikaawan9555]

No..... actually there's a reason why we work in shalwar kameez....(that's what we actually call it...it's known as shalwar kameez A National dress of Pakistan 🇵🇰....) And in sandals....cuz temperature here can rise upto almost 50 degree Celsius....Yup it becomes very hot In summers.....so it's almost impossible for us to wear some tight clothing...and work manually...which requires a lot of physical manual doing....Plus the workshops aren't temperature controlled.... there's hardly a ceiling fan or the padestal fan would available in such shops....So we work in a dress code... which actually suits us.....Same goes for helmets , ANd protective gloves and special work shoes....etc etc. It's a normal here...so it's not a big deal or issue here....and surprisingly everything goes just fine....like it's always been....

[@mohanmohabn7136]

Pp

[@jahanzaibshaheen7689]

Unfortunately there is no governing body to regulate work place safety.

[@rehanasghar7744]

Pakistanis 🇵🇰 u can do wonders 👏👍