Truck gets a "paint job" with UPOL Raptor liner. Bed liner spray

[@scanfreq1972]

Marvin looks like Lieutenant Dan. 😅

[@vintagetincustoms]

Lol.....lieutenant Dan was a great man. Marvin is lucky to even be mentioned in the same sentence. Thanks for the support comment. It's always a good time with Marvin in the shop

[@michaelau5159]

There's a Marvin in every workshop. Can't do without them. Need more Marvin's. Marvin for POTUS!!!!!

[@vintagetincustoms]

All truth. They're the ones that make going to work everyday interesting He's got my vote !!!

[@larryhendricks1034]

You did a great job! You made it look simple, but I bet it was a lot of work! It really makes it look like a new truck.Oh! And more Marvin! Lol

[@vintagetincustoms]

Thank-you for the kind word and support. The truck was alot of fun and it most def gave it a whole new look. I'll see what Marvin's availability looks like in the future. Maybe I just need to grow my hair out, put on some glasses, learn his accent and I wonder if anyone would know the difference. He def is one cool cat

[@andalonequipfin]

Congratulations on your channel ... I can see you struggled against yourself to push forward and we highly respect that! The paint job looks good too... all the best

[@vintagetincustoms]

@@andalonequipfin gotta keep motivated to keep progressing. Thanks for the support

[@rashmedo]

This guy is the real deal. Hilarious and very informative videos. Well done. Great job

[@vintagetincustoms]

Thank you very much for the comment and support. I'll do my best to keep the content coming. Much appreciated

[@magiccitydentworks5063]

I like the way you did the bed rails!

[@vintagetincustoms]

Thanks brother. It was def a fun project. We need to get together and build something too. Im sure the videos would be a hit

[@SaintDuck]

Looks great! Did my '05 Jeep Wrangler in Emerald Green Raptor liner. Everything that was green is now Raptor Emerald Green, everything that was black (bumpers, mirrors, etc) is now Raptor black. Looks fantastic. It does collect pollen and dust, but a squirt with a hose and you're good to go.

[@vintagetincustoms]

@@SaintDuck I bet that thing looks sweet. That's the best part of all this, pressure wash and go. Thanks for the comment and support. Check out my other content and subscribe. Thanks again

[@denverwood5290]

It looks so good man!

[@vintagetincustoms]

Thank you for the comment and feedback. These raptor liner products are really good products when prepped correctly. Thanks again

[@DavidMatiko-d3p]

Nice project. Cousin Marvin rules! More Marvin. I think the paint fumes are getting to him though. Ba ha ha

[@vintagetincustoms]

Lol.. ain't that the truth. He seems to always be around. Def hard to get rid of him.

[@BeardedKayakFishing]

I did this to my 93 Suburban k1500. Did a blue bedliner. Super durable and looks cool and a fraction of the cost of a paint job. I paid like $300 for everything

[@vintagetincustoms]

@BeardedKayakFishing right on brother. I'm def happy with the way it came out. It last so long , and if you can handle the look of it, it's perfect. Thanks for the support and comment. Check out a few of my other videos and let me know what you think

[@johnspartan3405]

Looks great. Thinking about going this route on my FJ Cruiser

[@vintagetincustoms]

You'll be glad you did. Def a big decision though, hard to go back to paint after this. Thanks for the comment and support. Check out my other videos and let me know what you think

[@Downhillrider888]

More Marvin! Awesome video, awesome skills

[@vintagetincustoms]

Thanks for the comment and positive feedback. That Marvin guy is a hard one to get ahold of....lol.

[@careycannon4559]

dude.... so cool

[@vintagetincustoms]

Much appreciated. It def came out pretty cool. Thanks for the comment and support. Check out my other videos and let me know what you think.

[@LarryWebb-g5d]

Nice looking spray job , how much will this cost the customer? Thanks

[@vintagetincustoms]

Thanks for the positive feedback. This one was $1500, but it needed body work done as well

[@DJ-du1mf]

I'm doing the same thing to my roof . Painting on a vinyl top with bed liner

[@vintagetincustoms]

This product comes out great. I bet it's going toblool pretty sweet

[@bassin_uce3732]

Good job! I did my 02 avalanche in charcoal grey raptor liner but i used rustoleum charcoal grey for the tint it worked out great! I always spray raptor at 60 psi for a smoother finish 10 feet away it looks like paint 😂.

[@vintagetincustoms]

Wow, that's pretty far and high. Sounds like alot of over spray. Thanks for the comment

[@bassin_uce3732]

@vintagetincustoms I don't spray from 10 feet away 😆

[@GentleStorm1]

I interpreted the comment as spraying from 10’, too. 😊

[@vintagetincustoms]

@bassin_uce3732 lol...I didn't think so, but i was going off the comment. I'm thinking 10 inches is more like it.

[@JoseOrtega-xn4mj]

Nice what PSI on air gun did you use?

[@vintagetincustoms]

@JoseOrtega-xn4mj I believes I was running about 45psi on this spray. You'll want to do a few test sprays and adjust the pressures to what texture you want

[@JoseOrtega-xn4mj]

@@vintagetincustoms thanks for the tips will do

[@demmygxd]

youre invited to the cookout 👍🏽

[@vintagetincustoms]

@@demmygxd that's a win in my book. Thanks for the support and comment. Check out my other videos and let me know what you think.

[@TheBakRd]

I dont know man, there are so many blotchy areas. You wwnt to do a dust coat at the end to blend everything together. Good luck on future projects!

[@vintagetincustoms]

Thanks for the feed back. I really think the camera didn't help that out. In person it's seamless.

[@morrieatkins5503]

Plan on doing bed liner on My 2010 Ram 1500 but plan on rolling mine with the bed liner and then paint it Gray for that is the color on the title

[@vintagetincustoms]

Roll on can def be tricky to get even. This raptor product is fairly inexpensive and comes with all the tools needed. All you need is a compressor and some elbow grease. Good luck with your project. It's always cool to hear what people are doing. Thanks for the comment and support

[@abumuhammad40]

How can I contact you.id like the same job done to my truck

[@vintagetincustoms]

Shoot the shop an email at [e-mail] with all your details and I'll reach out. Thanks for the comment and support

[@handyman1957]

Great video guys, looking to do this to my 91 Silverado and I have a couple of questions. 1. what kind of foam tape did you use, I looked on Amazon and there is a boat load of different types. 2. Do you feel like 8 cans was enough or would you have used more if this was your personal rig? The Raptor site calls for 16 liters for a truck this size. 3. lastly, the camera really doesn't do it justice, but how well can you see the metallic in the liner? Thanks again. Great job!

[@vintagetincustoms]

Thanks for the comment and support. I'll see if I can load a snapshot of what I use. It's good and sticky. I would go with 12L if you can find a kit that provides that. I've done enough to not have a lot of waste and know pretty well how it lays. But def go with 12L. I wouldn't think anymore than that, if you're just doing the body. The metallic is there, but its not crazy shiny or as noticeable as you would see in a paint job. The texture doesn't allow it to shine as much, but its def there. Hope all this helps. I think you're going to like how it turns out. Good luck .....couldn't load a picture, but it called Smooth Edge Masking Tape, by J-TAPE

[@handyman1957]

Very cool, thanks for the info, I'm going to be doing a metallic silver and metallic gun metal combo but I also want to do the fender wells and such. So I will just get two 8l kits. Been watching every vid I can to get this all down. Won't be doing it till next spring. Found the tape. Thanks again.@@vintagetincustoms

[@chelosauthentic]

This is cool. Thanks

[@vintagetincustoms]

@@chelosauthentic much appreciated. Thank you for the comment and support. Check out my other videos and let me know what you think. Feedback is always welcome Subscribe and share!!

[@chelosauthentic]

@@vintagetincustoms sure will

[@y0uares0funny]

Great job. I need to do that to my Jeep

[@vintagetincustoms]

Def do it. Comes out hella cool and overall an easy process. Hopefully you're staying warm out there

[@y0uares0funny]

@@vintagetincustoms it’s -16 today. Brrrrrrrr🥶

[@JennaTurner-b8y]

Looks awesome! Who painted the passenger side? More Marvin, more Marvin. 😂

[@vintagetincustoms]

I havent a clue who did that side. I lost the footage of that portion and it seems to have just sort of came together.....lol Marvin seems to just come and go. Hard fella to get ahold of

[@richreincke7197]

Loved your video. I plan on spraying my jeep commander. What grit sandpaper did you use to rough up paint?

[@vintagetincustoms]

I used 80 grit. A gray automotive scotch Brite pad will do the trick too. I used the 80 grit because that's what I had for my DA at the time. Thank you for the support and interest in the videos

[@mfpv_detroit8182]

Looks great

[@vintagetincustoms]

Thank you. Def took a little fine and patience, but in the end, the prep and work pays off. Thanks for the comment and support

[@coleman8267]

How many can did you use for? Primer

[@vintagetincustoms]

@coleman8267 12 to allow nice even coats to prevent striping and blotches. I didn't use primer on anything but where there was raw metal showing

[@jafxdwg]

More Marvin !

[@vintagetincustoms]

@jafxdwg I dunno, it always seems to be chaos when he shows up..... lol

[@evanram6608]

Will this be good for extreme winter weather? Also could I do white color bedliner?

[@vintagetincustoms]

I'm not 100% positive on the color choices, but I do know when I lived in North Dakota, this was the only product I used and it never had any issues

[@codyblack1498]

How many hours were spent sanding and then painting? Thinking about doing this on my 2013 f350 dually but don’t want to get in over my head.

[@vintagetincustoms]

@codyblack1498 a beginner could knock it out in 6-8 hours. This one took about 15 hours due to some dents that had to be pulled and worked out and a few other odd and ends

[@codyblack1498]

@@vintagetincustoms what about the paint portion?

[@vintagetincustoms]

@codyblack1498 that's everything. Sand, prep and paint. The paint portion is really quick. Hour at most. The prep is the longest

[@heatherlipinski9965]

Love it!!! More Marvin, more Marvin, more Marvin!!!! 😂

[@vintagetincustoms]

More to come!

[@mitchellscottmoreau]

What was the gun setting? What PSI was your compressor set to?

[@vintagetincustoms]

@mitchellscottmoreau I was running about 40 psi on my regulator. Hope that helps. Thanks for the support and comment. Take a look at my other videos and subscribe and share out

[@phil-fr4lg]

How many cans of Raptor did that take😊.?

[@vintagetincustoms]

12 cans

[@ufuk_yesildag]

After how many hours did you remove the masking tape?

[@vintagetincustoms]

I removed it about 15 min after I finished spraying it. I didn't want it to set up and get hard. It's alot harder to remove when it's dry

[@sitlos.]

Like how that looks for sure, How much does it cost to do a project like that, What would y’all charge for something similar?

[@vintagetincustoms]

Thanks for the comment and support. This one had alot of bodywork and a few new parts that went into it. $2k is a close ballpark.

[@GTILOUD]

500$ if you do it yourself or less a 8 bottle kit is $420 and will do most vehicles

[@vintagetincustoms]

Def right on that. This one was 12 bottles.

[@GTILOUD]

@@vintagetincustoms hell yeah some extra coats or something how many coats in total

[@vintagetincustoms]

This one was around $1500, but it need some bodywork and parts.

[@coolbrezze2052]

How much reducer did you use to get the smoother texture

[@vintagetincustoms]

It was roughly 4 to 1. Can't really go wrong with the amount as long as ypu do the same for each bottle of product

[@JordonVanduzen]

What’s the paint code you used to tint it?

[@vintagetincustoms]

@@JordonVanduzen it was just the charcoal gray that UPOL offered as a color when you select their product. Not sure on the code

[@Niebs-d7n]

How is it holding up and did it affect mpg ?

[@vintagetincustoms]

@Niebs-d7n holding up like the first day I sprayed it. No MPG change.

[@TylerChristoher]

I think all the painting and graffiti I've done years ago will give me a huge head start for starting to do this for my boss's. Painting in tunnels used to turn my boogers the main color I was spraying that day. How's the lungs 🫁?

[@vintagetincustoms]

Lungs are hanging in there. There's really not alot of fumes with this like paint and clears.

[@vernbruyere9141]

How much product did you use altogether?

[@vintagetincustoms]

12qts of material. They come as a kit online. Pretty easy to mix and the directions are spot on. Thanks for the comment and support. Check out my other videos and let me know what you think. Like. Subscribe and please Share it out

[@vernbruyere9141]

@@vintagetincustoms Thank you subscribed

[@redefv]

Can you purchase that on glass? I want to do my van and one side window I want to line over.

[@vintagetincustoms]

@@redefv I wouldn't have a clue if this product will adhere to glass. Probably not the best adhesion for that surface

[@redefv]

@vintagetincustoms I planned on wrapping the top 90% and doing something like this on the bottom 10%.. I love how this turned out though!

[@MrJoel92f]

Marvin said to say it’s cool

[@vintagetincustoms]

Lol..... that Marvin guy is a bad influence.

[@exerperez420]

Nice work I loved 🙏🇺🇸👍👋

[@vintagetincustoms]

Thank you for the comment and support

[@SuperSisterPrincess]

I there. 2 questions. Is this a linex coating you have done? And, how do you wash this ? Thank in advance for your answers.

[@vintagetincustoms]

It's a spray on liner and I wash it like any other vehicle. It's not a rough texture. Thanks for the comment and support. Check out the newer videos; I'd love to hear your feedback

[@sweden8641]

its really a bullet proof paint so raptor is easy to wash 🇸🇪 fr Sweden

[@mikesigncarver3803]

How’s it holding up

[@vintagetincustoms]

It was a customers truck but I check in pretty regular on it and the guy says it is holding up, no chipping, no rust through and still true to its color and texture. Thanks for the support and comment. Hope you enjoyed the video. Def check out my other videos as well and let me know your thoughts

[@Robcrz69]

How much reducer did u use per can

[@vintagetincustoms]

@@Robcrz69 I basically did a 1 to 4 for reduced. 1 part reduced to 4 of the bedliner. Don't need much

[@Robcrz69]

@vintagetincustoms Thk u Brother

[@andrecech7254]

What did you use as a degreaser I'm doing this to my truck and have it sanded down and just wanted to do a final clean after primer is scuffed

[@vintagetincustoms]

I use a product called Prep-All. Comes in a green metal can made by KLEAN-STRIP. Any degreaser off the shelf will work.

[@eddiecastaneda2859]

How many gal did you use to paint tue truck??

[@vintagetincustoms]

It comes in quarts. I used 12 on this project

[@michaelpandolfi9765]

Man that came out nice what reducer did you use I was thinking of doing my son's 91 jeep

[@vintagetincustoms]

Any medium reducer will be work

[@michaelpandolfi9765]

Thanks for the info like I said looks awesome

[@ericschmidt3759]

How difficult is it to put the emblems on after the liner is sprayed?

[@vintagetincustoms]

There was new emblems installed for this project. 3M emblems hold great

[@ericschmidt3759]

@@vintagetincustoms Thank you.

[@GlennVanderbeke]

This is cool :D

[@vintagetincustoms]

Thanks for the comment and support. Check out a few of my newer videos and subscribe. Feedback is always welcome

[@mauriceshaker8667]

Would you paint my car that same paint bedliner?

[@vintagetincustoms]

Bring it on out to PA and it's a done deal

[@shannongessele4880]

Great stuff,lol.

[@vintagetincustoms]

Much appreciated. Thanks for the support and comment

[@stiry81]

How much was the cost for the customer

[@vintagetincustoms]

A little over $1k

[@foxracing0127]

Too much yappin 🗣️🗣️

[@vintagetincustoms]

Guess there's a fine line between too much yappin and not enough yappin. Maybe I'll figure it out here one day. Until then.....keep watching and see if it gets better. This video is way old

[@Countrylivin4517]

There's always that hater that can't keep there lose lips shut and mind there business 😂 good job man

[@vintagetincustoms]

@Countrylivin4517 yeah, it's pretty easy to tone the negativity out. Constructive criticism def helps, but people yapping just to yap. Easy to forget. Thanks for the comment and support, it's all appreciated

[@Countrylivin4517]

@@vintagetincustoms absolutely man God bless you and yours keep up the amazing work my 2 girls want there 4 Wheeler rhino lined

[@foxracing0127]

@@Countrylivin4517 😂 okay I guess.. you’re d riding him

[@ericdebord]

Dude throwing his hands around and running his mouth like a rapper on meth.

[@vintagetincustoms]

You know it's the good stuff when them hands get to moving. Not too much into rapping, but it def got your attention, so it must've been good. Thanks for the feedback and support. Check out my other music videos.....I mean, content and let me know if I got any better. DISLIKE, SUBSCRIBE and SHARE !!!!

[@roadiemort3589]

Less nonsense and repeating yourself.....

[@vintagetincustoms]

Will. Do. Sometimes I just like to make sure the point get across. Thanks for the feedback

[@scanfreq1972]

You don't have to watch it. Go start your own KZbin channel and do it your way.

[@roadiemort3589]

@@scanfreq1972 I wasn't talking to you Karen!