Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg Check Out Parts For Your F150 Right Here: www.americantrucks.com/the-haul-news-june2019-2.html Wheel and Tire Setups From The Video: Black Rhino York Matte Gunmetal 6-Lug Wheel +12mm 20x9 - amtrucks.at/31arrff Fuel Wheels Krank Black Milled 6-Lug Wheel - 20x10 (04-19 F-150) -24mm offset - amtrucks.at/31dgZE0 Mickey Thompson Baja ATZ P3 Tire - amtrucks.at/2E3vnWZ
@seanjohn70115 жыл бұрын
AmericanTrucks Ford I want to go with a 24inc wheel on my 2015 f150 so what would be the best size to go with without any problem with rubbing but yet still enough tire for cushion on the ride
@armore88894 жыл бұрын
What size of tires are +12mm
@roncriswell26852 жыл бұрын
I believe I have a negative "24" on mine, I have aftermarket wheels and tires and I have to take it back to Ford because they were never balanced correctly.
@roncriswell26852 жыл бұрын
Will front and rear flaps help with mud and rocks slinging from negative 24 offset wheels?
@omegared39222 жыл бұрын
M
@joesainato80515 жыл бұрын
This video should be at every tire and wheel shop in the country. Great explanation of what offset is. Awesome job
@americantrucks5 жыл бұрын
Thank you very much, Joe! Offset and backspacing is a mystery for most people. We really thought this would help! -Zach
@prestonweitersjr.94604 жыл бұрын
@@americantrucks 1/9/20, There's really no reason to do this, the factory wheels do just fine, this is just something else to sell you. I live in farm country where contractors/farmers/ranchers w/real work trucks are outfitted w/the right equipment for what they do. Then there's the "pretty-boy trux" w/all this fancy aftermarket stuff.....that doesn't do anything @ all! I drive a 2015 Taurus w/a trailer hitch 4/a 4"x"6" mesh carry-all (1650 LBS/$600. in Lowe's), good enough 4what I need, cheaper than a trk when I don't always need a trk. (I'm ret. from a NY transit auth. where I've used many types of trux over time).
@m118lr4 жыл бұрын
I totally agree..
@jsay944 жыл бұрын
They should also explain that agressive aftermarket offsets wear out OEM wheel hub assemblies fairly quick.
@leejohnson72933 жыл бұрын
Perfect explanation!
@shredead2 жыл бұрын
This is the best explanation of this topic I've seen. Graphics of the differences help tremendously. Thank you!
@graphguy5 жыл бұрын
Best video ever on the subject.
@alejandromirelesrojas81934 жыл бұрын
Is really
@FtmfwId5 жыл бұрын
FYI, wheel width comes into play here as well as two wheels with the same offset yet one is wider than the other; the wider wheel will poke out more. Case in point is the first wheel was an 8.5" and the second was a 9". The wheel at the same offset would poke an extra 1/4" (or ~6mm) more. So going to a +12 in the 9" wide wheel from a +44 8.5" wheel has about the same poke as an 8.5" would at +6 offset. This is why these 20x12 -44 wheels poke out so much; it's not just the negative offset, it's the huge width change too.
@cottonhill354 жыл бұрын
So going to a 20x10 with a -18mm offset will poke around the same as a 9 inch width and -24mm offset?
@terryrosenthal59903 жыл бұрын
..finally , a GREAT VIDEO.. PICTURES TELL THE STORY..
@idontcaresapo82334 жыл бұрын
The flush offset is perfect
@GymJockey675 жыл бұрын
awesome video. I always wondered what that off-set talk was all about.
@jakechittle55474 жыл бұрын
Creddd xx x txted d
@Painfulwhale3603 жыл бұрын
My own personal preference as far as how far tires should stick out: 1” or less past the fenders if there are no flares. If there are fender flares it should also be an 1” or less past the edge of the flares. But hey that’s just me of course :)
@chrisboyd41263 жыл бұрын
I just learned alot in a short amount of time. Great presentation.
@Reverberocket4 жыл бұрын
I did not expect such a well-produced, informative video when I landed here. Well done!!!
@americantrucks4 жыл бұрын
Thanks a lot for the kind words! We really appreciate it! -Zach
@markzmudy18219 сағат бұрын
I've watched this video many times, and it is a really good one! The only thing missing is a 0 offset. It would be cool to compare the +12, the 0, and the -12. But well done overall!
@alankowalski87815 жыл бұрын
The best video i have ever seen explaing this
@prestonweitersjr.94604 жыл бұрын
1/9/20, Useless aftermarket equipment on equally useless vid!
@jayweathers92954 жыл бұрын
Preston Weiters Jr. If it’s not for you then don’t get it lol. He is just explaining something 😂😂
@2-1inffwa974 ай бұрын
I find it fascinating the further from rural places and closer to suburbs and cities I get the more off road looking vehicles there are
@ChitownsFinest844 жыл бұрын
Hands down the best video about offset meaning. Made shopping for wheels much much easier. Thanks guys!
@americantrucks4 жыл бұрын
Awesome, thank you! Glad we could help! -Justin
@D_Town_Throwdown3 жыл бұрын
Great visual with the rubbing in the wheel well. I was having a hell of a time understanding why a positive offset would make it rub. It’s not the side of the wheel well closest to the engine you have to worry about, it’s the inside of the fender directly in front and back of the wheel!
@WhatDayIsItTrumpDay5 жыл бұрын
Great job and video. Thanks for clearing that up. Always wondered which offset to get and what was stock. In my case the +12 would be preferable.
@aquaman01674 жыл бұрын
I swore I wasn’t going to level my truck or put wheels on it. Videos like this make that promise hard to keep.
@americantrucks4 жыл бұрын
It'll look great, Jack! You got this! 😂 -Zach
@emejunelee54944 жыл бұрын
what’d you end up doing?
@aquaman01674 жыл бұрын
EME June Lee I took the factory blocks off the rear and just lowered the rear. It’s the same as a 2X4 truck now. I can actually touch the bottom of the bed now.
@thisistheslam4 жыл бұрын
Man, I feel smarter about tires. This was a great tutorial on what I’m looking at when considering new wheels and tires. Great video!!
@americantrucks4 жыл бұрын
Thanks for the kind words, Chris! Glad it helped out! -Zach
@freakfiveoh5 жыл бұрын
Nice clear video guys, the animations help a lot. I don’t have a very aggressive offset on my wheels, but I question how much less I would have needed to trim had I gone with a most positive offset wheel.
@snooka24843 жыл бұрын
Best presentation of offset and backspacing.
@samlemma3 жыл бұрын
Man it took me so long to understand wheel offset until I stumbled on this video. Wow - amazing! thank you!
@christiantruther9367 Жыл бұрын
Great breakdown and just what I was looking for. Thanks
@americantrucks Жыл бұрын
Glad it was helpful! Thanks for watching! -Zach
@jayflo5885 жыл бұрын
That's so awesome u came out with this video. Just so happens I'm waiting for the last parts of my lift to be delivered today. Have my tire/wheels sitting in the garage with a -24 wrapped in a 35"x12.50. perfect timing thanks
@davidfitzgerald20575 жыл бұрын
Just spent almost $1900 on the website today😅😅 got 18x9 with -12 offset for my new wheels. New exhaust, headlights, and intake. I’m excited. Plus I’m installing my leveling kit for my new wheels next week
@americantrucks5 жыл бұрын
Thanks for the business David- we appreciate it greatly! -Justin
@DanTheRVMan5 жыл бұрын
I am glad to see companies talking about what the wheel and tire combos will do to people's trucks in a realistic fashion. Will you guys get into how these setups change scrub angle and what that means for stability especially while towing?
@Esianegg3 жыл бұрын
with all the other competitions I think I find this the best video and best website to buy rims and tires.
@aaronhankins15094 жыл бұрын
I love these videos, especially the ones with Justin. I am a new truck owner, someone who doesn't need to own a truck but wanted one so I am completely lost when it comes to most things trucks and every video I've seen with Justin is super clear and not too long-winded. I already bought running boards and an antenna from you guys and looking at new rims and decals next.
@Ensoniqdude8 ай бұрын
Simple explanation, great video representation……overall perfect video for this topic. Thx AT!
@aftabmohammedify4 жыл бұрын
Great job guys. Viewing this video is a must before you get them new tyres. Keep the flame burning.
@americantrucks4 жыл бұрын
Thank you, Aftab! We really appreciate the love! -Zach
@43topspin2 жыл бұрын
The best explanation I have seen on YT. Thanks guys!
@americantrucks2 жыл бұрын
Thanks for watching! -Zach
@lucky13driver5 жыл бұрын
Best explanation of wheel geometry I've ever seen well done!
@americantrucks5 жыл бұрын
Thanks Lucky! -Justin
@levishelley80184 жыл бұрын
I was pulling my hair trying to decide what offst to get. Glad i watched this video. I now know 0 offset is still offset from the stock wheels im replacing. I love the look of big neg offsets but living on a dirt road i will stick with tiny bit of offset
@wilkensjean93742 жыл бұрын
Best explains out of all the videos I’ve watched thank you
@americantrucks2 жыл бұрын
Thanks for watching! -Zach
@Adamthebuilder2 жыл бұрын
Thank you for taking the time to fully explain in great detail about offset, love your channel and will definitely be using your website for my new 2022 super duty!
@americantrucks2 жыл бұрын
Thank you for watching! -Zach
@robcarr8505Ай бұрын
Perfect explanation. Thank you
@americantrucksАй бұрын
Thanks for watching! -Zach
@joeyguerrero86094 жыл бұрын
Great job explaining offset.
@americantrucks4 жыл бұрын
Thanks for watching, Joey! We appreciate it! -Zach
@antonioaa80974 жыл бұрын
Just the video I was looking. Good job explaining the offset.
@americantrucks4 жыл бұрын
Thanks for watching, Antonio! We appreciate it a bunch! -Zach
@mikegilbert7330 Жыл бұрын
Absolutely what I was looking for same year and model of truck, definitely very helpful.
@americantrucks Жыл бұрын
Glad we could help! Thanks for watching!
@ViperVenom5 жыл бұрын
8:57 Really helpful animation
@Torquenews5 жыл бұрын
This story is covered in detail at Torque News at "Video Explains Ford F-150 Offsets and Helps Owners With Key Info About Tires" www.torquenews.com/3769/video-helps-f150-owners-providing-them-key-info-about-pickup-tires-offsets
@UnholySwan3 жыл бұрын
I was just asking about this in an F150 group I’m in, glad i found this. Im looking at some +35mm offsets for mine and was confused.
@americantrucks3 жыл бұрын
Happy to hear this video helped you out! Thank you so much for watching and make sure to subscribe! -Zach
@ljs57576 ай бұрын
Okay I realized some people like to make their big wheels look fancy but I'm getting sick and f****** tired of getting a rock slung on my windshield and having to pay for windshield repair and or replacement, in Louisiana it's illegal to have your wheels stick out past its wheel covering and the state police have announced they're going to start cracking down if you don't have extended wheel fender wells😂
@zevvy69674 ай бұрын
Shut up nerd
@ThePete24322 жыл бұрын
Wow that +12 offset is perfect
@blainemaestas885 жыл бұрын
Answered my questions of what I need to do with my '15 f150. Thanks
@americantrucks5 жыл бұрын
Thanks for the feedback, Blaine! -Zach
@v92373 жыл бұрын
Thank you for this! Very informative and easy enough for anyone to understand
@americantrucks3 жыл бұрын
Thank you for watching! -Zach
@international-arms-dealer3 жыл бұрын
the animation at 8:57 is priceless!
@RobRebel725 жыл бұрын
Great video with great information. I could have used this when I had my Jeep Wrangler.
@Dr._Swash_Buckler2 жыл бұрын
Best video and great animations I’ve seen yet. Thank you for all the great work!
@americantrucks2 жыл бұрын
Glad you enjoyed it! Thanks for watching! -Zach
@mandmedia58415 жыл бұрын
Great video 👍🏻 I really didn’t understood offset before
@moonbounce5 жыл бұрын
You should mention that wheel bearings will suffer with more offset. Be prepared to replace sooner. Also steering components will suffer and a tendency to follow road imperfections.
@kurtzimmerman16375 жыл бұрын
You are correct. Changing the geometry of the bearing load will create nothing but problems. 🔩
@brandobecerro2 жыл бұрын
I have the same truck same color and putting on basically the same tires. Glad I was able to see what they’d look like with offset. I’ll be getting some new rims before installing the Mickey Thompson tires. Thanks!
@americantrucks2 жыл бұрын
Thanks for watching, Brandon! We appreciate it! -Zach
@jimrodriguez8047 Жыл бұрын
Great explanation and examples! Thnx
@americantrucks Жыл бұрын
Thanks for watching! -Zach
@dlg54853 жыл бұрын
You didn't discuss spacers. I know it's an inferior solution to achieving a more aggressive stance, but A LOT of people use them. I'm not a huge fan of really aggressive poke, but I do find this stuff interesting. Is using spacers safe? Does it harm the vehicle's suspension or hubs? For someone like me who prefers an OEM look but wants a more flush look, I'm wondering if simply using a 1 inch spacer with factory wheels is a reasonable option on a F-150.
@chadrack76175 жыл бұрын
I have a 2018 F150 With a 2.5 supreme suspension level 17” BMF drt pro wheels 8.5 wide + 6 offset With atturo trailblade XT’s 35x12.5x17 no rubbing at all and about an inch of poke
@jayLove28132 жыл бұрын
Thank u.. finally a detailed video definitely going with positive 12 mm fender flush
@americantrucks2 жыл бұрын
Thanks for watching! -Zach
@gman35635 жыл бұрын
Great and informative video. Thanks Justin!
@sokay2laugh5122 жыл бұрын
Really helpful information, especially being able to see the side by side comparison.
@americantrucks2 жыл бұрын
Thanks for watching! -Zach
@ceedrizzle96515 жыл бұрын
just what i needed great vid mate
@anujkerketta29474 жыл бұрын
Best offset video
@edwardthomas82494 жыл бұрын
A video that gives great understanding about offsets. Great job
@americantrucks4 жыл бұрын
Awesome, thank you! -Justin
@vesakittela57934 жыл бұрын
My current setup on Hilux 2018: 265/60R18 9J ET+12 . New setup would be 265/70R17 8J ET+20. Offset calculators online say that poke would be 20mm less. But if i still have same width of the wheel 265 Wouldnt the wheel sink in less in to the wheel well (20-12 = 8mm). So I'd still have tyre "poking" out just 8mm less than the current setup.
@entrepreneur_journey72 жыл бұрын
THANK YOU. Just what I needed to know. Getting some nice wheels
@vincesk8er9714 жыл бұрын
the intros are super satisfying
@califpv5 жыл бұрын
I have +10 305 /55 's on my 17 f150 and I love that it just barely comes out past the fender... To each his own ✌️
@tbsb84284 жыл бұрын
Please let me know what is the backspacing on the Black Rhino York 20X9 with the +12mm Offset? That set up is rad and looks great. Ready to buy that wheel/tire combo. Btw- could I do a +285/60r20 with that wheel set up with no issues? My front end is raised 2.5 inches...
@vinnie76542 жыл бұрын
Perfect video guys! A++++
@americantrucks2 жыл бұрын
Thanks for watching! -Zach
@kato21825 жыл бұрын
i just got smarter now these are the classes i like 😎
@prestonweitersjr.94604 жыл бұрын
1/9/20, No, you just got dumber. Who needs this junk? It's just some aftermarket, hi-priced stuff 2 sell U! ...... over & above original equipment.
@joshuaschmidt5552 Жыл бұрын
Remember, width and offset combined are what create poke. Trying to show what changing offset alone does should be done by only changing offset. The three wheels you showed have different widths, 8.5”, 9”, and 10”.
@WhatDayIsItTrumpDay4 жыл бұрын
I'd go with the +12 "flush" offset with my truck. Just to bring the tires out a bit than look like they're stuck in there too much.
@tommybahamax5 жыл бұрын
Thank you for this video!!!!
@Wizardnil3 жыл бұрын
This was a super educational video, well done!
@americantrucks3 жыл бұрын
Thanks a bunch for watching! We appreciate it! -Zach
@Joefun50 Жыл бұрын
Finally a video that explains exactly what I wanted and needed to know🤘 awesome thanks guys
@americantrucks Жыл бұрын
We're happy to help, Joe! Thanks for watching! -Zach
@scottmehlin68025 жыл бұрын
Love the grey ford trucks! Think that is lead foot and the 2019 is called abyss grey, both of those are 🔥. Ordering one next year or might wait to see what the 2021 looks like
@dnazoom68504 жыл бұрын
I was waiting for offset to come out and be like “OFFSET WOO WOO WOO WOO WOO” lol if you get it you get it
@scottgorman71664 жыл бұрын
Now I know what I'm looking at when I see different setups..thanks
@americantrucks4 жыл бұрын
Thanks for watching, Scott! We're happy to help! -Zach
@grimreapercmn4u4 жыл бұрын
This was an excellent video. Did great job on visually showing the difference. Great camera work !!
@americantrucks4 жыл бұрын
Appreciate the love! -Justin
@eddiewiercioch7774 жыл бұрын
That was a great video and you explain the tire offset positive and negative in a great way! Thanks!
@americantrucks4 жыл бұрын
Glad you enjoyed it Eddie- thank you! -Justin
@WuTangMan4 жыл бұрын
Thank you for this video! Now I know which tire set / size to get for my Fuel Contra wheels and tires
@roccol53604 жыл бұрын
Great explanation! Thanks!
@americantrucks4 жыл бұрын
Thanks for watching, Rocco!
@barxkyRC5 жыл бұрын
this helps me decide what kind of wheel and tires I should get...love the +12 offset look......thank u
@americantrucks5 жыл бұрын
Thanks for the feedback!! We're always happy to see that our videos are helping people out! -Zach
@micsu82303 жыл бұрын
Thank you for the insights...great to know the pros and cons of off-set rims...now iam all set for zero off-set for my pajero for daily use and offroads
@Sagittarius-883 жыл бұрын
These kinds of things are always going to be highly subjective, and everyone obviously has their own opinion. When I went looking for wheel and tire combination for my 2020 F150, the possibilities were seemingly endless. However, it doesn't take that long to start whittling things down. Style, size, offset, hub bore, price, and availability quickly become factors, and the list of potentials gets quite short. My truck came with stock 20's (275/55R20), with the obligatory +44 factory offset. While there's a lot of options for 20 inch wheels, I was never crazy about that wheel size. I chose the path of less wheel and more tire. The final verdict was Fuel Assault 17 X 8.5, +14mm offset, with Toyo Open Country 3s, LT 285/75R17 load range C tires. The combination of less offset with a wider and taller tire has given my truck the exact look I was hoping for, and the Open Country 3s have performed well in the northeast snow. That being said, anyone who's unfamiliar with these types of things, but looking to change their factory wheels should watch this video, multiple times if necessary. It's very clear cut, informative, and gives a great visualization of exactly how offset will affect the look of your vehicle.
@americantrucks3 жыл бұрын
Thanks for the kind words! -Justin
@whiskeyrock734 жыл бұрын
Awesome video! Answered all the questions I had about picking some new rims. Thanks!
@americantrucks4 жыл бұрын
Great to hear and glad to help! -Justin
@darmah990alchemy64 жыл бұрын
Best vid on the question of offset. Visual and informative. Thanks I free comfortable change the rims on my F250SD now.
@americantrucks4 жыл бұрын
We're glad it helped out! Thanks for watching! -Zach
@Tonio_ Жыл бұрын
Very detailed video thank guys 👍🏽🤝🏽
@americantrucks Жыл бұрын
Thanks for watching! -Zach
@Greg-el4sv3 жыл бұрын
I have a 3 inch lifted STX..........stock wheels with 325/65R/18 tires............have my share of rubbing, mainly on the upper control arm. Hopefully this vid helps me out. :)
@jsims2445 Жыл бұрын
Great video!
@NewYorkF150stx3 жыл бұрын
I appreciate this information so much! I finally understand what is OffSet means. 👍👏🙏
@sundaydickson6 ай бұрын
First of all, I do appreciate you taking the time to inform your audience of this very important issue amongst us truck owners. Secondly, if I want to maintain my stock wheel on my 23 F-150, how do I achieve the +12 offset (a poke of about 1") with spacers (I assume) ?🤔
@americantrucks6 ай бұрын
Spacers would be your best bet if you want to keep your factory wheels, for sure! -Zach
@dunedude23855 ай бұрын
@@americantrucks I was going to ask the same thing so lets say i put 35/11.50/20 on my current 20 inch stock ford rim i have a 2 inch leveling kit Will that mess up my offset any?
@darklight48153 жыл бұрын
I have factory 18" wheels on my 2016 XLT...I'd like a more aggressive stance but don't want to modify anything and don't want any suspension issues to worry about...I want the all around multi purpose setup ,looks like that 12mm negative offset with a 20" wheel might be the answer for me.
@papipapi18582 жыл бұрын
For a minute I thought you was going to come out with the captain America 🛡
@BUILT_FPC_VUDU4 жыл бұрын
Graphics department for the win on this one.
@americantrucks4 жыл бұрын
No doubt- it was actually done by one of our very talented video editors who is a jack of all trades. -Justin
@joenonnemaker13734 жыл бұрын
so what does it do for alingment
@MrBill997 ай бұрын
Good explanation but I would like to know if handling is affected by offset changes. Are any offset changes approved by the manufacturer?
@brotyree11503 жыл бұрын
Great Video.....thank you!!
@dlrautomotive7885 жыл бұрын
Awesome video and very informative.
@luavaitupu51472 жыл бұрын
Very helpful brother 👍👍 God bless
@americantrucks2 жыл бұрын
Thanks for watching! -Zach
@romarro4616 Жыл бұрын
this is very informative thank you
@americantrucks Жыл бұрын
Thanks for watching!!
@martingonsalez6635 Жыл бұрын
so if the most aggresive set up here is -24. a -12 will be a perfect offset if you don t want them to stick two inches so -12 will be an inch off set