Trumpeter

A big kit, a good kit, a long video... Took me more to edit than to build... This is the full Trumpeter Ju-87A Stuka built. Let me know what you think by leaving a comment below.

[@josephstabile9154]

Thanks for showing your beautiful build of this kit! A couple of technical errors to note: 1. The Ju-87A did not employ those partiicular bomb/fuel tank racks; they are specific to the D model only. The A model wings were not "plumbed" for fuel lines for drop tanks, and the Jumo 210 of the A model did not have sufficient power to carry center-line bomb AND wing tanks/bombs. 2. A model only carried one 7.92 mm mg 17 wing gun. Typical Trumpeter lack of attention to historical technical detail by including D model-specific parts in an A model kit, and not, at the least, warning in the instructions the modeler.

[@wbpsmodels3452]

Thank you for the information.. truth be told, I'm not a history buff and I had no idea of the facts that you mentioned.. So I simply followed the instructions and tried to make a realistic model. You are greatly knowledgeable in the subject. Thank you for watching.

[@neilhaas]

The Junkers 87A Stuka known as the screaming dive bomber aircraft for its screaming.

[@Scissorsguy]

Congratulations on building a giant your award is a subscriber even though you have tons I’m still subscribing

[@wbpsmodels3452]

Thank you :)

[@Scissorsguy]

@@wbpsmodels3452 your welcome;)

[@Sea-cadet2838]

​@wbpsmodels3452, it's been a year you all good mate

[@thomasjewell6951]

AN AMAZING KIT! HOWEVER THEY COULD HAVE HAD A REMOVABLE COWL PANELS TO DISPLAY THE POWERPLANT AND SLIDING CANOPYS.

[@paulhaynes1314]

Great video, awesome build, getting tips before starting mine, however I haven’t an airbrush kit, only ever used brush but never done one this big, I’m thinking of moving over to airbrush so this video has helped a lot, would like also a 1/24 Spit but from comments so far all over I’d prefer new tooling version Again nicely done sir 💪🏻 Happy new year

[@Jeff-cv4qn]

Well saved on that cross decal at around 42.59! Beautiful work and just the right amount of chipping IMO.

[@stephenlovelock5563]

Really enjoyed your video,great to see 1/24 scale represented,lovely build, well done mate.

[@wbpsmodels3452]

Thank you very much!

[@oranje1964]

Beautiful kit with lots more detail than the Airfix version i built a while back. I do believe a great kit like this deserves an aftermarket instrument panel and seatbelt upgrade. Your build looks amazing. Thanks for the video.

[@wbpsmodels3452]

Thank you very much :)

[@arthurrytis6010]

@oranje1964. Hope someone like Quinta or Red Fox brings out a 3D decal set for this.

[@ChristianSchroter-ok4sk]

Hello mr. W!boy!that bird is huge! Great job done.a nice little gem you have created.i also like your passion for detail.i truly appreciate ur efforts.of course you deserve a thumb up.and. keep up the good work and Keep the faith.with best regards and sticky greetings from Brandenburg germany.faithfully yours.your modellmate.christian

[@steve1315]

Good work sir,looks a better kit than the very old Airfix kit be nice if they updated it.

[@wbpsmodels3452]

I seen to remember having tried that Airfix Kit back in the far 70's.. but I can hardly remember anything, not even sure if I had finished it... (after 1977 I stopped for nearly 40 years) - Bu't I'm sure that "vintage" kits aren't as detailed or well machined as nowadays kits. Thanks for waching

[@ejuist]

Ich wollte bei meinem neu zugelassenen Auto das Kennzeichen JU 87 haben, ging nicht ! Auch JU 88 und JU 90 waren angeblich vergeben !!

[@markc7002]

Exceptional job with the tones and weathering!!

[@neilhaas]

Thats a plane aircraft of the Luftwaffe, Adolf Hitler & Goring.

[@josephstabile9154]

Yes, it is.

[@davidharrington1133]

Looks like a very cool kit. I have a 1/24th Spitfire and Hellcat in my queue but this one is definitely one to add. I always loved the Stuka

[@wbpsmodels3452]

I have the 24 Spit in stash too... Haven't been able to find the Hellcat yet, although I must admit that it intimidates me a bit... Perhaps when I get more experienced I'll buy it..

[@scottledbetter7212]

Wow. This kit is massive ! Outstanding job on it !👍

[@wbpsmodels3452]

Thanks a lot!

[@scottledbetter7212]

@@wbpsmodels3452 You are welcome !

[@monsieurchevrebois9811]

It looks closer to 1:18 as the Airfix 1:24 is considerably smaller.

[@filipetabr9987]

hello everything is fine? I hope so, I'm Brazilian and I really want to start plastic modeling, I have a reserve of money destined for this, however, when I think about the painting part, in addition to not having the ability, I don't have money for adequate equipment, would you be able to help me? Thanks

[@joshbeasant6858]

Very enjoyable video thank you❤❤

[@wbpsmodels3452]

Thank you too

[@rafaeldelpozo1902]

Me encantaría q hicieras este modelo de avión Revell-Messerschmitt Bf110 C-2/C-7, 1:32

[@wbpsmodels3452]

I have it in my stash... stay tuned.. won't be very soon however.

[@rafaeldelpozo1902]

@@wbpsmodels3452 perfect!!!! Thx!!

[@johnlong7178]

A true work of art! Nice job

[@wbpsmodels3452]

Thank you!

[@davidharrington1133]

Using the tablet foil for paint is genius, will definitely be stealing that idea.

[@wbpsmodels3452]

I sincerely wish you didn't have to take any tablets.. but by all means, feel free to steal it ! :)

[@zaptekarskaprecyzja]

OMG, this plane is huge! Do you have hangar to expose it? :)

[@mohammedalmukhtar5428]

What was the problem with the right wing white cross decal?

[@wbpsmodels3452]

I used my scalpel to cut the "inside" parts of the decal carrier (so that it wouldn't show) and the four cross sections were misaligned when applied... I had to align them as four separate decals.

[@goforitpainting]

Cool 👍

[@barrywhitfield930]

Lovely build! It's a shame there's no open engine panels though

[@normg2242]

❤

[@goldenscales]

Absolutely amazing aircraft! I built a 1-24 scale Ju.87 back when I was 19 or so. That was back in the day when they would provide a small battery-powered motor to spin the propeller blades! Sadly, I can't remember the name of the company that made it.

[@wbpsmodels3452]

Thank you very much. There are still some "Technik" models which supply a motor (i think even Revell has some) but they are very expensive nowadays

[@grahamleach9440]

Brilliant work! Am doing the airfix one at the moment and it’s a dog in places.

[@wbpsmodels3452]

Thanks!! Good luck with yours... Is it the old one (circa 1976)?

[@grahamleach9440]

@@wbpsmodels3452 Yes, the 1/24 one. It’s nearly ready for paint now,just filling the gaps lol.

[@memememe2674]

Airfix and the word DOG in same sentence, no way I!

[@grahamleach9440]

Not the new ones! The new tool ones they are bringing out are brilliant. Have you seen the new 1/24 spit? It’s superb. Honing my skills to start mine.

[@SirSavesALot1977]

Outstanding build! Well done! Do you use a respirator when gluing and painting?

[@wbpsmodels3452]

Thank you! No, I don't use a respirator... but I only use water-based acrylics, no enamels

[@rodrigotalero754]

Fantastic work it's a pitty not to find a way to show up the engine details

[@wbpsmodels3452]

Indeed... I couldn't risk destroying the cover... and I didn't want to have a "naked" stuka.. (I did that in my 1:48 build). Thanks for watching!

[@daffo001]

Outstanding!

[@wbpsmodels3452]

Thank you!

[@androot69]

At this scale you can give the pilot a pack of cigs and a map and you didn't even made a single cable. Shame on you sir. For a modeller who makes such beautiful seat belts that should be a cake walk.

[@ianday5583]

A great kit, but the tailplane endplates are wrong and the undercarriage trousers are way too big. Also, the complete centra canopy opens. More research before you build methinks! 2/10 for this video.

[@adamw2442]

Who cares

[@ianday5583]

You should.!Oh and the spinner is the wrong shape for the Anton.

[@danielgottschalk8188]

Schön gebaut,aber die Ju87A konnte keine Zusatztanks tragen,erst die Ju87R war dazu in der Lage.Da hast du einen Fehler gemacht.