Truth: Permanent Magnet Motor - Best Perpetual Magnetic Energy Idea

The world of magnetic motors is vast and the possibilities are many. I have been working on perpetual motion motors for some time now and after making some promising replicas I have found a method to make magnetic fields visible to check where there might be design errors. More about this in the course of the video.Also today we look at a very nice example of a Free Energy engine. The ingenious thing about this motor is that, due to its design, it re-positions its own magnets on its own and very cleverly uses the law of levers, because the rotating magnetic slide is always on the longer lever.Let’s examine how the principle is conceived and how it can work.
Deutsche Version
Echt? Permanent Magnet Motor - Beste Perpetuum Magnet Energie Idee
• Echt? Permanent Magnet...
---
#yWild

[@CrosswireHunter]

man ... your graphics are at another level ... i love you buddy ... thanks for your hard work.

[@yWild]

Hi Cross, soo glad you like it. Thx for your comment and for watching 👍🏻🥳

[@needmoreboost6369]

Here’s my take on a magnetism based perpetual motor or an over unity generator if that’s what it is, if it’s successful and you don’t provide a load or means of retarding the output or phase timing it should (run away) or over speed! It will accelerate until peak output is reached and a contraption like this if it by some miracle overcomes the mechanical losses which it does not look like it will! Will self destruct really quickly! It will shake itself to pieces as the potential speed is in the tens of thousands of cycles a minute! But you’ll figure it out! You put more effort into this than I did 30 years ago! Well done!

[@yWild]

Hi Need, thx for your comment. I haven’t invented this one. I took the idea from KZbin and thought about the principle. The result is the video. 🙂 You did right, years ago 😉 Thx for watching

[@ministerRichardIanofKerr]

My friend, this is pretty much EXACTLY the design I have been playing with since a child. Many variations for 40 odd years. I forgot all about it with life getting busy for a few decades, but just 6 months ago I was pulled back to it by spirit, and this was the first design I started back on. Again, I stalled and have started a dozen projects, never finishing one. SO, I AM SO HAPPY TO SEE YOUR RESULTS HERE !! WELL DONE MATE. Happy to bounce ideas with you and share all my ideas. Keep going. Though I am certainly NOT trying to come up with a perpetual motor or a over unity free energy generator, but I am looking to utilise all we can pool together or what I can gather to at least have a motor/generator running as efficiently as currently possible with all the new improvements with processing speads for switching and magnets of greater strength, etc etc. If it cuts my fuel bill or power costs down by 75% or greater, 50% even, I'd call that a success for me, and more than enough for others to build upon and improve. I recently purchased some nice N52's and have some tiny generator ideas i'm tasking presently. I look forward to cruzing your channel and looking at what else you have been working on. Namaste'

[@yWild]

Hi Richard, thanks for your comment. Sorry for my message, that this device is not working. I tried some devices by myself before I changed my point of view. Your idea to improve the efficiency of an really working motor is great. Good luck 🙂, thx for watching.

[@vivache2762]

i make like this motor 30 year ago...

[@hashfors]

@@vivache2762 you’re 12 bruh ..

[@aponahsan2737]

"Magnet free energy" typically refers to the concept of generating energy from magnets without consuming any external power source. However, it's important to note that this idea goes against the laws of thermodynamics, which state that energy cannot be created from nothing (law of conservation of energy). While magnets can be used in various energy generation technologies like generators and motors, they do not provide "free" energy. Energy must still be input into the system to make it work, and there will be losses due to friction and other factors. So, there is no practical way to generate unlimited free energy from magnets alone.

[@yWild]

Hi Aponah, thanks for your comment. Yes, that’s exactly what I try to tell to the people which believe in perpetual motion machines. If you like, you can watch the video till the end where I show my gravity model. It’s a simple way to understand magnetism. Thx thanks for watching.🙂

[@ThongHuynhphuoc]

Energy is not present in the magnet. What do you think when magnets attract and repel each other? Isn't that energy or what??? In my opinion, it is endogenous energy and we are not qualified enough to exploit it.

[@weslingm]

One addition could be made. When each magnet passes by the other magnet there is a flux reversal. This is a generator moment! Just install a coil on each magnet. Not sure what type of coil, you have 9 long magnets. There are so many ways to do that. The coils will produce more than enough power to support your movement forward.

[@yWild]

Hi Wesling, thx for your comment. If you insert coil for gathering electric energy, the coil will slow down the rotation because it will act like a power break. If you take energy out of the system, you can not renew it out of nothing 🙂 Thx for watching.

[@weslingm]

That's why you put coils on the out side not in between magnets

[@mattiask55]

very good animation, you do your videos and explanation in a good way.. Greetings from Sweden!

[@yWild]

Hi Mattiask, my Swedish friend, thanks for your comment. I’m glad you like it. Greetings from Germany. 🤗

[@danbhakta]

I saw this design a while back...been waiting for your take.

[@yWild]

Hi Dan, great that I was able to do the right thing 😀. Thx for your comment and for watching 🙂

[@danbhakta]

@@yWild : I'll say this. I'm a skeptic 1st., however I'm an open minded one. Honest skepticism must maintain a mindset of infinite possibilities. The current understanding of the physics demands that PM is improbable. At the same time...I think that the PM community is a necessity. At best they do provide mechanisms that could lead to potential efficiency gains. They do serve a purpose that the orthodox scientific community may overlook.

[@yWild]

Hi Dan, both is important. Either to stay by technology tried and tested for a long time - as trying to break out of technology believed to be safe to explore new costs of knowledge. 🙂

[@williamanthoine6985]

I just wanted to add: Nice fabrication work on your machine!

[@yWild]

Hi William, glad you like it. Thx for watching 🙂

[@ogd3thst4r93]

I mean yeah the cgi looks amazing.

[@x_makina_x]

You are at very high level this type of explainations.👍 Love and can't wait your videos

[@yWild]

Hi X, thanks for your comment. I appreciate this so much. Glad you like it and thx for watching 😀

[@syedabdullah2069]

Nice efforts efforts Keep it up young man ! Can we support the System with flywheel Motion to add to the repulsing power to rotate more force?😊

[@saritapulacorda]

It is only a good idea. But, the weight of the arm that leaves the rotating shaft, and which supports the set of magnets in orbital movement, would already cause, by itself, a decompensation that would tend to stop the rotating movement. Better idea would be to replace the arm with a perfectly balanced disc

[@yWild]

Hi Sarina, thank you for your comment. Yes the weight of the arm it’s a real problem. You can solve it by turning the machine horizontal. Then the weight of the arm doesn’t affect it. Even then the machine would not work. 😄 thanks for watching.

[@DP-hy4vh]

The same thing could probably be done by cycling electronagnets in place of the moving magnets. The motor is first started with battery power then switched over to a recharging generator once it gets going.

[@yWild]

Hi DP, thanks for your comment. The loss of power using electro magnets will make it impossible to build up an perpetual motion motor. But for just build this kind of device it’s an good idea. Thx for watching 🙂

[@GraditelMacedonia]

Good ... Maybe is better to have counterweight!? Indeed that counterweight to be also magnets but with opposite poles, which will be pushed away instead attracted.

[@yWild]

Hi Graditel, thanks for your comment. Yes, an counterweight may be an solution, but first, you have to recognise that this design does not work. 🙂 thx for watching

[@davidkatuin4527]

As usual a great explanation !!! Thanks for your videos!!

[@yWild]

Hi David, glad to hear from you again. You’re very welcome 😀. Thx for watching

[@jean-paulallaume8640]

Mechanically, it doesn't work because the crankshaft is not functional. It rotates on its axis on one side, and on the connecting rod side, the movement shown is impossible. To make it work, all the connecting rod legs must be mounted on the same axis, like on a star engine.

[@yWild]

Hi Jean, thx for your comment. Thx for watching 🙂

[@Ramp10er]

How to resolve the increase and decreasing power? Or low rpm and high rpm?

[@RomulusBoeriu]

Congratulations, perfect explanation !

[@yWild]

Hi Romulus, glad you like it. Thx for watching 😀

[@Bartetmedia]

Makes sense and it looks great, whether it works or not your model looks awesome. I will try someday, can you please share your 3D files?

[@yWild]

Hi Bart, thx for your comment. Glad you enjoyed the 3D experience 😀. I’m sorry, I do not share the models because they are only made for showing the audience the not working principle. If I share them, someone could have the idea to sell them as if they were able to work. Hope you understand. Thx for watching 🙂

[@virgilroberson577]

I am glad to see your motivated as I am one to try and solve this problem as well unfortunately this design will not work and the reason is that all the magnetic repulsion is connected to each other essentially and because of this you will get magnetic lockout so to say

[@yWild]

Hi Virgil, thx for your comment. I am motivated, yes 🤗. But after a while trying to get magnetic devices work - and they don’t - I started thinking about making the invisible visible to find my point of failure. Then I realised the gravity model, shown in my videos, and now I’m sure to know why all this stuff just can’t work. 😬 Thx for watching 🙂

[@soul2065]

Have you ever used that model system to designe something always going down hill, or towrd the gravity extreme point?

[@yWild]

Hi Soul, thanks for your comment. I have to apologise because I don’t use the model for being creative in means of making new free energy machines. The reason is that if you are familiar with gravity, it’s extremely hard to imaging something that it’s able tricking the universe and its rules. 😄 So the gravity model is primary useful showing how a magnetic field may be misinterpreted. 🙂 Thanks for watching

[@strangedeergaming4848]

Nice 3d animation!

[@yWild]

Hi Strange, thank you, I appreciate that very much. 🙂 thx for watching

[@asetyabudy]

What about push north magnet between north and south magnet to avoid attract

[@felixaudet5860]

A magnet is a holographic version of the Earth's magnetic field. Whatever you do to a magnet, you do, to some extent, to the whole of Earth's magnetic field. Opposing fields are not healthy for the earth's field. Attract and release is the way to go. Being in line with the Universal flow. That's how you create technologies that are benign or even beneficial.

[@yWild]

Hi Felix, thanks for your comment. And because the fields are opposing, my advice is: don’t build any magnetic engines anymore 😄😄😄. Thanks for watching.

[@norbertg7946]

Dobry kierunek....💪👏 Tak trzymać

[@yWild]

Hi Norbert, glad you like it. I appreciate that very much. 🙂 I will do my very best. Thx for watching

[@majidellahi8531]

energygraphy channel published this idea a few months ago, it's good to mention the source when you copy..!!

[@yWild]

Hi, thanks for your comment. Yes, you’re right, that’s my fault. I took this cool design because it’s unable to run perpetual and is very cool to look at 😅. And I don’t tell it’s my idea 🫣. Thx for watching 🙂

[@marcdecherf9850]

That's a very nice animation, but it doesn't work in real life

[@yWild]

Hi Marc, thanks for your comment. Yes, that’s exactly what I tell in the video 🙂. Thx for watching

[@QuinceDeMayo-jg5wb]

Si es posible que la bola se quede ahí y con un carro esterior la mitad que el que utiliza usted?

[@yWild]

Hi Quince, thanks for your comment. The size of the outside cart does not matter. It has to overcome the repulsion and to move the inner wings in the direction of repulsion. 🙂 thanks for watching

[@victor7574]

If a motor is in a permanent state of imbalance, it should be self-starting regardless of the relative positioning of the driving and driven elements.

[@yWild]

Hi Victor, thanks for your comment. Yes, it will start to run in the moment when it is built. And it will never stop until it is disassembled. 🙂 thx for watching

[@RedneckRepairs]

There would appear to be a lot of friction involved with this design. I understand why that friction *must* exist to make the design work, but it's a pity that there is not a way to design that out of it.

[@yWild]

Hi Red, thx for your comment. I like this design very much because of its smooth movements. Yes friction is a problem but the main issue is that the design is not able to run without external power source 🙂. Thx for watching

[@ThongHuynhphuoc]

I'm trying to buy the number of magnets in your video to get the job done.

[@yWild]

Hi Thong, great that you are going to try to build it in a way it works. But first I recommend to watch my video till the end, because if you are familiar with my gravity model you may think about your new design ideas different. If you are successful please let me know. 🙂 wish you luck. Thx for watching 👍🏻🙂

[@randycoolbaugh1408]

cool concept. have you built a working model? so many people out in the world on the cusp of making these actually feasible. Myself included. If only I had computer/3-D printer skills.

[@yWild]

Hi Randy, thanks for your comment. It’s impossible to build a working model, but it’s possible to try out some of the designs which are shown on KZbin. Unfortunately, there is no good perspective to be successful. 🤔🤪 Thanks for watching.

[@SimonHirst-c5y]

The way there trying to move the magnets is imossible, but possible for the motion. I have one idea that works and cant wait to see all ur comments, only tip ill give where your all going wrong. STOP THE CIRCLE MOTION! Good luck

[@yWild]

Hi User, thanks for your comment. I’m curious what kind of motion you are thinking of 😃. Thx for watching

[@wesrurede]

Look up video " Magnet Motor South Korea " and it is similar. Someone stated that one didn't work either. Might be a good one to break down...

[@yWild]

Hi Wes, thanks for your comment. I wasn’t the designer of this idea. I just try to show that it is not able to work using the gravity model. Thx for watching 🙂

[@darrenoxford2281]

Turn it sideways so your not playing against gravity

[@lortalt9163]

Sprawdź w Blenderze, czy prawdą jest, że elektron wiecznie krąży wokół jądra atomu i nigdy na niego nie spada. Będziesz miał odpowiedź, jakie wady mają twoje blenderowe analizy. Pozdrawiam.

[@yWild]

Hi Lort, thanks for your comment. Checking in blender does not work, that’s true. But I don’t check it in blender. I just show what is happening. 🙂 thanks for watching

[@lortalt9163]

@@yWild Sam sobie zaprzeczasz. Nie pokazujesz co się dzieje naprawdę, tylko tworzysz efektowne animacje obarczone prawdopodobnie wieloma błędami. Twoje filmiki są równie mało wiarygodne jak konstrukcje, które analizujesz. Błąd sprawdzasz błędem. Pozdrawiam.

[@ThongHuynhphuoc]

Hello! Thanks for the great idea. I've been doing work with magnets for a long time now and always get stuck. Thank you for your good idea. I'm already implementing your idea. I think what we are doing is increasing the efficiency of the engine because when passing 1/4 turn, the rotor accelerates suddenly. Thus, through 1 rotation, the rotor will have 4 times of acceleration without adding thrust. Can you connect directly to the engine and transmission to check how the performance is? And another thing: due to the eccentricity, the rotor vibrates very strongly - it must be counterbalanced. Thank you very much. Hope to exchange more.

[@yWild]

Hi Thong, thanks for your comment. Glad you like the video. Just as a well mend hint: The principle this motor is based on is not working. I try to tell this in my video with the help of my gravity model. Feel free to build a free energy machine, but recognise that most of the motors principles out there are only ideas without a working guarantee. If you are able to find a principle which is working in my gravity model also, then it might have the ability to make the Revolution 😄 Thx for watching

[@jacekhubert100]

Construction with many mechanical moving parts and many problems with. Also need counterweight for stable work.

[@petruspiwosz84]

This augmented reality contraption will surely run as long as how long your smartphone battery will last.

[@yWild]

Hi Petrus, thx for your comment. It’s all CGI so no battery is included 😄. Thx for watching

[@str8up598]

Repulsion can not be gradual. Has to be switched instantaneous less the motor finds equilibrium and stops.

[@noel3422]

Interesting video but still no free dinner.

[@luisacevedo3570]

Esto no va a funcionar porque en la simulacion se olvida de algo basico, la fuerza de gravedad, cuando el pendulo va de subida lucha contra la fuerza de gravedad y debe ir mas lento, cuando va de bajada la fuerza de gravedad lo atrae y va mas rapido, luego de unas vuelta el pendulo va a quedar hacia abajo atraido por la gravedad, solo va agirar por efecto de la inercia y mientras lo hace se va a sacudir como cuando la maquina secadora de ropa no queda centrada Tiene que ponerle un contrapeso neutro magneeeeeticamente solo para estabilizar frente a la gravedad el giro This is not going to work because in the simulation we forget something basic, the force of gravity, when the pendulum goes up it fights against the force of gravity and must go slower, when it goes down the force of gravity attracts it and it goes faster, after a few turns the pendulum will remain downwards attracted by gravity, it will only rotate due to the effect of inertia and while doing so it will shake like when the clothes dryer machine is not centered You have to put a magnetically neutral counterweight just to stabilize the spin against gravity.

[@yWild]

Hi Luisac, thx for your comment. For wiping out the gravity it might be possible to rotate the motor to work in horizontal instead of vertical position. But the principle is not able to work. Thx for watching 🙂

[@danielgiaco1963]

El sistema no me parece malo, una observacion humilde, los campos moviles debieran estar mas retirados para que el rotor pudiera entrar y enfrentar el campo movil que de seguro repele...si no estan mas retirados tanto campo como rotor no va a funcionar no podra entrar y aparte debera pasar elnrotor por lo menos mas de la mitad del campo para que siga su sentido de giro

[@yWild]

Hi Daniel, thx for your comment. Yes, at the first glance, it looks like it could work. On the other hand, it’s impossible to move, repelling magnets together using less energy because the repelling. The invest of energy for moving the lever and moving the inner magnets higher than the gain of energy of the outer magnet. 🙂 thanks for watching.

[@danielgiaco1963]

@@yWild Hola Amigo me encantan estas cosas, yo creo q esto es atrapante

[@christophehoudart7539]

très belle vidéo pour un projet utopique . le début de vidéo sur la table est très belle mais il faut retravailler l'ombre sur le cendrier ! Encore un fack . l'idée peux sembler bonne mais ça ne peux pas fonctionner ! Dans tout projet avec des aimants , tout le système s'équilibre et rien ne bouge . bravo tout de même ce travail pour convaincre des faibles d'esprit .

[@yWild]

Hi Christophe, thx for your comment. Yes there are some details in the CGI that could be better. 😅 If you like to watch the video a bit further, you will recognise that I try to show all the perpetual motion believers my gravity model. The model shows the invisible magnetic field and its interaction with other fields. Thx for watching 🙂

[@AbstractcurvesSoftware]

Place the system on its side so that there is an even influence of gravity on all parts

[@yWild]

Hi Abstract, thanks for your comment. Yes this would be a good way to ease the influence of gravity. It would help if the device would be able to work😉. Thx for watching 🙂

[@gerritcoetzee9075]

​@@yWild : Nicely put.

[@yWild]

👍🏻🤪

[@VrilyaSS]

Jetzt baue es in echt und wir sehen ob’s funktioniert

[@yWild]

Hi Vrila, darum geht es ja genau in dem Video. Es geht eben nicht, aber warum? Thx for your comment and for watching 🙂

[@mangjay80]

Woow ini keren kalo terjadi

[@laurieandrus1430]

The amazing thing about this machine is that he was able to hide all of the power cords running to it, powering it perpetual motion. Machines are impossible thermodynamics people learn your science.

[@yWild]

Hi Laurie, thanks for your comment. Actually I take a perpetual motion design and make a video about. Then, I show my gravity model and try to run the motor within. My mission is to show the fake videos 🙂. Thx for watching

[@anayoodukwe36]

This ain't even real. It's a CGI concept.😂

[@gerritcoetzee9075]

​@@anayoodukwe36 Don't you see that that is exactly what he is showing 😢? He tells the viewer through CGI why it is not working. Or did you not watch to the end?

[@gerritcoetzee9075]

@laurieandrus, you are so quick to be judgmental that you either do not comprehend the presentation, or you did not watch it to the end. I suggest you reconsider your comment...

[@markholloway9638]

Laws are made to be broken.

[@Fireball_Roberts]

Funny how everyone in the comments has their own ideas on how to "improve" this already impossible device.

[@yWild]

Hi RR, thanks for your comment. It’s OK to improve the design, and if the machine will work also in my gravity model, then the next step to perpetual motion has been done 😀 Thanks for watching

[@enriquerivas5055]

All these videos have the same problem, you design thinking spin smooth but you aren´t considering the energy needed to detach attraction in your system, that is to say that the first step when magnets start to pull together it´s fine, but when you will try to detach that attraction it could spend all energy of the system, that motor will not work

[@Юстас-п6й]

but we don't live in a cartoon

[@yWild]

Hi User, thx for your comment. Yes you’re right. I describe the function principle in the video and why it is not able to work. Thx for watching 🙂

[@AlecBerg]

You have the voice of a evil scientist and a great video. Thanks.

[@yWild]

Hi Alec, thanks for your comment. I really do my best. 😈😎😅. Thanks for watching.

[@alexs43s]

Hello! I can offer you a completely new concept of a magnetic motor. I'm currently working on a project.

[@thaddausreis9733]

As a chiled I had allways something like this in my damn head 😶‍🌫️

[@robbmaier368]

Thus arange a 16 phase componet and to condition its displacement ratio on a low R.P.M CONECTION ON A LARGE SCALE HAVE HUGE OBTAIN ABILITY... MAN YOU HAVE SOMTHING THERE ..

[@robbmaier368]

Congratulations

[@pulsedmotor]

I bet this dude couldn't build a simple pulse motor.

[@yWild]

Hi Pulse, thx for your comment. It’s just too simple 😄. Just joking. Thx for watching

[@LeoNardo-gg5fn]

Esse nao funciona ! Mas existem outros modelos que funcionam.

[@yWild]

Hi Leo, thanks for your comment. If you know any working devices I will be glad if you would show me. Thx for watching🙂

[@ferdmilkingmunoz282]

Then why not make one.

[@yWild]

Hi Ferd, good question. If we can overwhelm the fact that the principle is not working, we could do it 🙂. Thx for watching

[@edwardparker760]

Nice CGI, now try making it work for real

[@yWild]

Hi Edward, glad you like it. I’ve been trying to make similar devices work, but I wasn’t able to do it. So I thought about a method to make the invisible visible. Thx for watching 🙂

[@haehnelconrado3099]

Dejan de gastar dinero y tiempo en diseños que no funcionan ni pueden funcionar. Para hacer un motor magnético primero tienen que encontrar un material que permita hacer que el flujo magnético pase en un sentido y ni en el otro, esto es un DIODO MAGNETICO. Usen todo su dinero, tiempo e imaginación en investigar este tema, el que lo logre ganará mucho dinero, fama y resolverá el problema de la energía para la humanidad.

[@coco-ry8jg]

High resolution magnetic line camera.

[@yWild]

Hi Coco, thx for your comment. Yes I do my videos in 4K, 60Hz. My GoPro is a great thing 🤗, thx for watching

[@thebigfella9095]

wont work

[@yWild]

Hi Big, thanks for your comment. Yes, and that’s the reason why I do these videos. I show a way of new thinking of magnetic fields. Thx for watching 🙂

[@terryhill6752]

Ha Ha, this is a SCAM, you never get to see the back of this machine as the arm attached to the cam cannot physically travel around as being shown here on this COMPUTER-generated video it would hit the steel framework as it is in the way, think about it!!

[@yWild]

Hi Terry, thanks for your comment. Yes, you are right, but the reason for this video is to make people understand why these devices are not able to work. Feel free to watch this video a bit closer, then at about minute five you will see what I mean. I so why this design is not able to do the job. Thx for watching 🙂

[@giannineve]

No perché la forza che occorre al gruppo di Magneti interessato a ritirarsi è superiore al lavoro che offre la circolina.

[@yWild]

Hi Gianni, thx for your comment. Wherever the greater force may be. The principle of this perpetual motion motor is not working. Thx for watching 🙂

[@friedrich_k]

Permanent magnetic energy? You fool us, and you know it. Liar.

[@Solingen1000]

Ok build one and show me

[@yWild]

Hi Solingen, thx for your comments. It’s not necessary to build one of them only for showing that they are not able to do the job. You can prove it in your brain using the gravity model. Thx for watching 🙂

[@moking8095]

Very elaborate, Very SCAM, SCAM, SCAM.

[@borriskoszlat7408]

It is CGI...😂 you can see thecwrong shadows and all magnets the same model😂

[@yWild]

Hi Borris, thanks for your comment. Yes you’re right, it’s all only CGI. 😄 but watch the video to the end and you will see what the reason this. 🙂 thanks for watching.

[@BetaSFDarchive]

Oof German version of this video only has 13 views 😂 Vielleicht glaubt niemand da mehr an diese "Freie Energie" Motoren 🤔

[@yWild]

Hi Beta, thx for your comment. Yes it’s few actually 🤪, but I will continue with them because there where some people asking for a German version. Außerdem ist die Kommunikation in der Muttersprache viel einfacher. Und mein deutscher Akzent ist zumindest für die deutschen Zuschauer schwer zu ertragen 😄. Thx for watching.

[@josefkoller9803]

I think it will not work!

[@yWild]

Hi Josef, thanks for your comment. So I think too and so I try to show it in the video 🙂. Thx for watching

[@kobold2183]

No!

[@yWild]

Hi Kobold, no? 🥺 thx for watching 🙂

[@andrew09021977]

Сперва создай это в металле и покажи, что работает, а потом только "садись на уши" не окрепшим умам.

[@yWild]

Hi Andrew, thanks for your comment. Even if I would build it in metal, the field stays invisible and so I never knew if my configuration is, the reason that the thing does not move, or my small technical skills are reason or the design is the reason for it. The only way is to make it invisible visible. Then the design could be proved. Thx for watching 🙂

[@สมานรักฟ้า]

นี้เห็นไหม้เขาออกแบบพลังส่วนเสียแทบไม่มีจะได้พลังงานเต็มทุกๆส่วนเก่งจังคิดได้ก่อนย้อมได้เปรียบสมองมนุษจะเห็นช่องทางหากเราจะคิดทร่างสรรญก็มักจะเกิดประโยชได้นะครับขอขอบคุน

[@Уланбек-й3ь]

Прадаю да

[@ichikimpaddington8936]

Bla Bla BlaBlaBla Bla bla bla, you have all your chance for president,

[@thilovonstillfried6278]

Vielleicht sich mal mit Physik beschäftigen, dann würdest du deine Zeit sinnvoll nutzen!

[@yWild]

Hi Thilo, thx for your comment.

[@wolfgangpawlik2137]

Das kann niemals funktionieren !

[@yWild]

Hallo Wolfgang, danke für deinen Kommentar. Dass das nicht funktioniert ist die Haupt Botschaft in meinem Video. Ich erkläre das anhand des Gravitationsmodells. Du kannst gerne auch die deutsche Version des Videos ansehen auf meinem Kanal yWild.deutsch. Thx for watching 🙂

[@mikvadesigner]

deep fake

[@yWild]

Yes 😀 but with an honourable Intention, thx for watching 🙂

[@angeloparodi2537]

fake video.... cgi Build one for real

[@yWild]

Hi Angel, thanks for your comment. If you watch the video till the end you may recognise that I’ve had found a new method to make magnetic interaction visible. So it’s possible to check the possibility of success of an design. Therefore I am using CGI. 🙂 thx for watching

[@shakaibsafvi97]

what a waste of 10minutes ! this is all rubbish !!

[@AliPrize]

Ерунда какая-то.

[@yWild]

Hi Ali, but a good one, I hope. I try to spread the message that these devices are not working. I do this showing my gravity model so that people which are not familiar with magnetism are able to understand why this Motos do not work. Thx for watching 🙂

[@FSkyJet]

Fake

[@yWild]

Hi FSky, thanks for your comment. That’s the reason why I make these videos. I just show the reason why these devices are not working. Thx for watching 🙂

[@stevenw4549]

Waste of time.

[@yWild]

Hi Steven, thanks for your comment. I don’t really think so, but I know what you mean. The video shows the flaws in the design of the motor. Many people believe these devices are able to work. Thx for watching 🙂

[@stevenw4549]

These things never work nor will they. I have investigated many of these things for myself by building them. Regardless of design, the devises always find equilibrium and stop. Thus, a waste of time, and materials as well as money..@@yWild

[@yWild]

Hi Steven, it’s a waste of time if people do design mistakes twice. I try to give them a clue to look at the design with different eyes. Possibly they find a new way, no one ever thought of 🤔🙂.