Try This Before You Replace The Fork Oil Seal

Here I'll show you a method to clean off the grime and dirt trapped between the fork and oil seal. People have been successfully using this method for many years. Do give it a try before you replace the oil seal.
Disclaimer : Try it at your own risk.

[@IzSaru]

Thanks for this video. I had no idea this was even possible, but I tried it and worked great.

[@wernerlampe8089]

Today I did it on my wife's Suzuki Savage. It works! ... Both sides of the fork are dry now. Thanks my friend an best regards from Germany !👍👍👍

[@sceptrdisle1766]

Hi - and thank you for this tip. It certainly seems to have worked. I wonder how many seals need not have been replaced if people tried this first! Interesting as well - I didn't really see much debris on the tool. However it did release a small quantity of fluid which may have flushed out very fine particles. I'm guessing too that the tool helps to reseat the seal. It would be interesting to hear from a seal manufacturer on this. (And then again - if only we could design a 2-piece seal that could be fitted without stripping the forks...! - now I'm already thinking about it!) But what a time & money saver this trick is! Again well done for the idea and the clear instructions.!

[@johnreylactuan9778]

Haha yes this really helps me. Thank you so much for sharing your knowledge sir. I just did it and it was so easy and effective. It saves my pocket!

[@Malc02]

Thank you so much you saved me about a $500 job (replacing fork seals ) at mechanic. This seemed to work for now- will update if any changes

[@amthedrkale]

Most welcome. I would highly recommend you replace the fork oil seals as soon as you get an opportunity.

[@rs_rev_limiter]

😂😂

[@NOONE-hp8bw]

Replace them yourself they are easy to do

[@bahheh7759]

@@NOONE-hp8bw what are the tools needed?

[@DHGZOMBIEKILLER]

Ur mechanic is a dick lol mine quoted me 135 a side

[@emblake7750]

Just done this today,so far so good,cheers mate

[@newsbangla2360]

thanks man..i m from Bangladesh. It works You save my time and money..

[@loner6n239]

Thanks for the trick man! I will give it a try on my ER6N. Cheers from Neuquén, Argentina!

[@amthedrkale]

Most welcome, do let me know if it works out for you.

[@mayankpundeer7511]

Will try on my Vulcan too

[@vishnukumark6757]

Thank u soo much bro. It works good to my thunderbird. U saved a lot of money for myself. Without knowing this, i have changed two times oil seal in my thunderbird earlier (cost arround 1.5k for me)

[@mariusmihai918]

1.5k? Usd?

[@triviumfaisal]

Thanks for your knowledge.

[@drivefact]

It worked! Fantastic..

[@gabriellebucao9194]

Thank You brudda! You saved my ass! This worked out quite well for me.

[@amthedrkale]

Most welcome. Do take your bike to a garage and get it checked out with professional equipment.

[@saisracerking967]

Anna edi work ayindhi u save my .oney thanks bro

[@Parkerarchitectural]

You are a genius! But sadly this great tip did NOT help me because last month I replaced both seals in my Z1000R and this month I replaced both seals in my YBR125 and THEN I saw your brilliant video!!! Argh! Next time for sure! One observation - rub the edge of your plastic tool with fine abrasive paper to remove the sharpness of the cut plastic so you do not cut or damage the seal :) Many thanks :)

[@federicocao574]

Yeah, I don't have leaks I have squeaking but I don't know wich one it's. When I try to compress the forks my self the bike don't squeak, but when I'm riding it squeaks I'll try to clean the seals, thanks Mr.

[@SportbikerNZ]

Bad idea. There's nothing wrong with the seal if it's not leaking. You'll just be risking damaging your fork seal for nothing. This vid is fine if the seal is already leaking because you have nothing to lose by trying it.

[@roxiejohntaripe3344]

It's working to my bike... Thanks!

[@amthedrkale]

I'm glad it worked.

[@vrboill6736]

Whts tht thing

[@kushalsapare2734]

Fantastic 👌🏻👍👍👍

[@Turco949]

I'd not advise using WD-40 as a lubricant if water attraction/retention is not desired. Also, WD-40 is not as rubber friendly as some other lubricants like Tri-Flow which would be much more ideal. Also, if trying this trick, use a very thin and flexible film like vinyl piece. I saw some notebooks or organizers come with section dividers that would work nicely. Also, at the very least, replace the fork oil as the old one is likely to be contaminated with water and gotten thinner, more likely to leak out.

[@amthedrkale]

Agreed to all your points. WD40 is used because it's widely available. Not all other products are available everywhere. Also, this technique is a temporary fix till a rider gets home/garage. Replacement of oil seal and fork oil will most certainly be required down the line.

[@Turco949]

@@amthedrkale I understand but using the right tools and chemicals make all the difference. Also, seals do last a lot longer if proper maintenance done timely and properly. Fork oil, engine oil, coolant, brake/clutch fluid, fuel tank, etc., people wait way too long to change the fluids and every single fluid in a motorcycle attracts water or forms water due to air inside which leads to corrosion and contamination which eventually eats the metal and the seals, o-rings, etc. and creates the big repairs. I believe proper and timely done maintenance will prevent majority of these types of issues people experience on their vehicles. Another reason why seals go bad is inactivity, meaning, bike sits unused for a long time (months, years) and the seals dry up. Much like the seals in the master cylinder of the brake system, fork seals stay pliable by the fork oil keeping them lubed. Those riding in rain and bad weather could also invest in neoprene type fork wraps that keep the dirt out before they get on the fork and work their way in, more so with not inverted forks. Ride safe!

[@marvinagay9578]

Thanks sir

[@pramodranasinghe2114]

It works thnks ma man🔥

[@kiranm2192]

Just bring back old age rubber cover for suspension

[@mamunrana3800]

Thanks working my bike 🥰

[@omairkhan6136]

Seriously working you save my khuwari and paisa😁

[@sonofagalwayman6553]

yes works fixed a 1979 r100rt NZ

[@akshatchugh7953]

Hey my bike’s oil has been leaking from a long time i did all of the steps so do i have to refill the oil on the shocker?

[@amthedrkale]

Looks like you'll need to refill the oil and change the oil seal and dust cover. Basically a complete rebuild.

[@cateringtaste7585]

Honda hornet bike 11 thousand km run in HILLY AREA SIR . AFTER CHANGING FORK OIL ON 17 NOVEMBER 2020 MY BIKE HANDEL VIBRATE DURING RUNNING AND THIS PROBLEM NOT COME BEFORE SERVICING WHAT CAN I DO SIR

[@amthedrkale]

Did you add same grade of fork oil as recommended by the company? Or did you put heavier grade of fork oil?

[@robertdorsey8870]

exc. video!lets see if it works!

[@frankb.3556]

Great video! I tried this on my dirt bike today and it stopped the leak!

[@amthedrkale]

I'm glad it helped.

[@shaelmiah]

Let me try it I think that can be done by your method...

[@shaelmiah]

Bro I did your magical tip n it's work such a magic I like to thank you for sharing with us very helpful content 👌👌👌👌👌👌👌👌👌👌👌👌

[@craigleidigjr4170]

If forks were leaking oil this is useless. You need proper oil amount in each fork. This is for safety in handling.

[@speedtune9605]

What did you actually did with that plastic?

[@nitin7218]

speed tune That 'J ' shape of the plastic collects dust and sediments from the oil seal, now it doesn't need replacement for a while.

[@PACHUAU_79]

I am unlucky,both my bike front fork oil seal is leak,I tried this,for left one it work..but unluckily right side is still leak..unlucky me..but atleast it work for one side 😜😜😜

[@krunalambre7797]

what is that plastic called??

[@amthedrkale]

It is a simple tool that has been cut out from a soft drink plastic bottle.

[@vrboill6736]

Whts tht material called

[@amthedrkale]

Which one to be exact??

[@a.ksingh2244]

Well i tried.. but it didn't work.. Bike - Honda CB hornet 160 r

[@Sloww_Mk3Supra]

If she leaks past the dust seal there’s a really good chance the oil seal is shit

[@rahulchakraborty9745]

What is the use of wd40? Does it repair the actual leak area?

[@amthedrkale]

No, it doesn't repair anything. WD40 helps the tool slide in between the seal smoothly.

[@Janpva.]

okay but arent' you supposed to refill oil in the fork ? if it was leaking, you shoul fil it againe no ?

[@amthedrkale]

If you completely rebuilt the suspension and change the oil seals, yes. You will need to refill the oil.

[@Janpva.]

@@amthedrkale okay.. thank you! it just that my "scooter yamaha xmax 250" is wobbling badly and i feel like it could be the oil missing... but I dont know

[@amthedrkale]

I would highly recommend getting it diagnosed and fixed at a professional garage.

[@Janpva.]

@@amthedrkale you are probably right

[@asifkhan-vq3si]

This work bro... Thanks for help

[@sahilsaha3259]

अरे भाई ही नदी बोल

[@shivambandral8625]

Hindi bolo

[@faustin289]

I don't see the point of that DIY plastic. You could just have used the rug. Also, having the seal fail after only 8k km is a bit unusual for a decent bike. What's the make of your bike, is it chinese?

[@petey611]

How you gonna get a rag in between the seal and the fork?

[@charlesgeorge8111]

Japan made in India.,

[@SportbikerNZ]

I think you need to use your head before you comment. Imagine trying to use the rag between fork and seal. Everyone is facepalming. Seriously...

[@russelllocke7180]

Very dusty & bumpy riding conditions are more the point with a leaking seal, not distance travelled. Use a rag???? 😱Yes, you should probably think a little longer before typing a response.

[@heymanbatman]

Mine is new dominar400 but already notice oils on left fork only. Odo at only 550km. I might try this diy

[@sukhdeepsingh9335]

💯👎👎👎👺😬👹👎👎

[@jackripper1209]

stupid wd40? hahah that will ruin ur rubber

[@SportbikerNZ]

Naw, noob myth. The seal will be fine.

[@JoseRodriguez-lt7xi]

Bro use brake cleaner mr mecanik guy

[@mubarakka7364]

English 👹👹👹

[@omasbimboladen993]

Nonsense. If oil leaked the amount of oil inside is not enough to work properly anymore. Do yourself a favour and change the fork seals.