Trying a different Pop Pop boiler - Fast but no Pop!

  Рет қаралды 5,138

GrandadIsAnOldMan

GrandadIsAnOldMan

Күн бұрын

Пікірлер: 11
@AttilaBlade
@AttilaBlade 5 жыл бұрын
The silence one is better for the ears, the noisy for the kids. Sometimes the kid stay there in the old body. I like both of them. Nice boat Grandad! ;)
@GrandadIsAnOldMan
@GrandadIsAnOldMan 5 жыл бұрын
Thank you
@Resonanttheme
@Resonanttheme 2 жыл бұрын
Not bad, I liked how it turns the corners too.
@GrandadIsAnOldMan
@GrandadIsAnOldMan 2 жыл бұрын
It was interesting to try epoxy to glue it together, but I used too much so there was no flex in the diaphragm to make the popping noise. So it worked fine, but almost silent.
@rgbungee1420
@rgbungee1420 2 жыл бұрын
Hello im building one for a science project and at the end of the session my teachers wants us to race our boats, is it possible to put a rudder underneath the exhaust of the engine to make it run straight? and if it is, is it possible for you to make a video about it, Thanks Grandad!!
@GrandadIsAnOldMan
@GrandadIsAnOldMan 2 жыл бұрын
They tend to be so slow that a rudder has little effect. I would suggest two quite large rudders either side, rather than obstructing the exhaust.
@GrandadIsAnOldMan
@GrandadIsAnOldMan 2 жыл бұрын
It just occurred to me that you may not have seen the links in the video description to my other pop pop boats, including an RC one.
@mikeflight9
@mikeflight9 5 жыл бұрын
LOL. Don't know why it's not popping but that one is really fast. There is a type of epoxy resin and rubber sealant you can buy that is totally heat proof. I used the epoxy type on a 2 stroke glow engine and it held great. I used he sealant for the bottom and top of a Sterling engine and that worked perfectly too. I really need to get the finger out and try building one of these pop pop boats. :D
@GrandadIsAnOldMan
@GrandadIsAnOldMan 5 жыл бұрын
I think the glue is covering too much of the surface preventing it flexing. I have studied a few other similar boilers and they fold the top down over the bottom so I will do another some time.
@kimjespersen5263
@kimjespersen5263 5 жыл бұрын
please make a bigger pop pop engine :)
@GrandadIsAnOldMan
@GrandadIsAnOldMan 5 жыл бұрын
There really isn't much point in making them significantly bigger, the power does not scale up with the size. There are many different designs in my associated playlist here kzbin.info/aero/PLA5a2xPRSrB2M0m754LkqMXQFwFRAS3HK
Pop-Pop Boats Are Weirder Than You Think
12:48
Steve Mould
Рет қаралды 9 МЛН
Single Pipe no Boiler Pop Pop Boat - proof of concept
12:08
GrandadIsAnOldMan
Рет қаралды 12 М.
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Pop-pop engine (part 1)
17:31
foguista
Рет қаралды 401 М.
Triple pipe CO2 capsule boiler pop pop boat P1
14:56
GrandadIsAnOldMan
Рет қаралды 21 М.
CARA MEMBUAT PERAHU OTOK-OTOK/POP POP BOAT DARI  KALENG BEKAS MINUMAN
26:09
Will this toy engine work at full size? (yes)
15:35
Steve Mould
Рет қаралды 5 МЛН
A New Design of Pop Pop Putt Putt Boat Motor
27:36
Atomic Shrimp
Рет қаралды 118 М.
Knatterboot / Pop Pop Boat selber bauen
17:26
J.R.Bulli´s Channel
Рет қаралды 82 М.
Spinning Pop Pop Boat - Putt Putt
7:43
DaveHax
Рет қаралды 294 М.
How to Make a Pop Pop Boat From a Pop Can!
10:39
Forrest Trenaman
Рет қаралды 2 МЛН
Microcosm - Mini Live Steam Engine
9:24
Ronald Walters
Рет қаралды 25 М.
Membuat Mesin Perahu Otok Otok - Mainan Jadul Tahun 90-an
10:37
Nomon Suhendar
Рет қаралды 198 М.