TRZ Billet spindle TBM brake install on Doug's Nova

[@MrAnimalsrtasty1]

Impressive! Pretty cool that the wheel spun during Doug's closing remarks.

[@lyallnitz8835]

Super impressive you're attention to detail and passion for making improvements.

[@clodbusted1776]

Your brakes are amazing I run your brakes on my monster truck. At the end of a freestyle run the rotors are glowing red hot and they still work flawlessly. I wouldn't run any other brake setup

[@MotionRaceworksOfficial]

Thanks for your feedback! We just developed a new Monster Truck rotor and have available that I think you’ll really love. Takes that package to the next level as you all push things harder and harder each year!

[@motoweenies4431]

looking forward to a vented setup, hopefully parking brake capable as well!

[@MotionRaceworksOfficial]

Oh yeah we have a parking brake already done and all will have that built in

[@puttrs]

Nice job, well done. I was surprised that the rotor doesn't appear to have a locator to the hub, it appeared that the rotor to hub holes are slotted? Maybe I just missed that part. I agree with the Timken bearings over all the fancy stuff. Another thing I'd add is the use of wheel bearing spacer kit from DRP, they work great on our DLM and I'd figured they would work great in a drag drive/street application as well. Thanks for sharing the video!!!!

[@baddaddy8718]

Thanks for givin the honest disclaimer. Brakes should be correct for the application and car and not looks. She’s looking so clean, almost tooo clean

[@Ranger4banger]

Start to finish brake line plumbing videoooo 🙏🏻🙏🏻🙏🏻

[@GidDree]

That's an Art on it's own....

[@stevenraymer6682]

Thanks Doug

[@jesseshort8]

Loctite is actually supposed to be used with a primer that they make to get the full advertised strength. I just found this out not too long ago. It's on the instructions printed on the bottle. 🤯

[@billjenkins1416]

I was confused at the beginning after reading spindle mount… I thought you meant spindle mount wheels, brakes, hubs lol. My strange front spindle mount brakes really seem (to me) like they are too small but they work and still have the dual caliper strange on the back.

[@eikodunn]

👍🏾👍🏾👍🏾👍🏾👍🏾

[@gasparsperformance9841]

What!!! No titanium wheel studs?

[@wiedehopf9068]

Check sound after 9 minutes, some overdrive in there (for the next video it's not that bad). Interesting video.

[@xozindustries7451]

I’m excited to see your street vented brakes. Are the hubs that you use safer than the corvette style cartridge hubs?

[@wadestewart901]

Will you guys have a vented street rotor for the Foxbody? 4 and/or 5 lug?

[@Dealete420]

👍

[@markroper9269]

Dumb question......if they are so good....any thoughts to start selling to maybe off road markets or more mainstream vehicles?! Just curious.

[@MotionRaceworksOfficial]

We have a lot of King of the Hammer, Ultra 4 customers etc using some of our F4 and F5 series brakes. What you are seeing here is our drag race design. But we live in every world from oval to off-road, road race and everything in between

[@Novaman-rx3er]

3350lbs bracket nova Manual drums on mine Can TBM make better all the way around???? I like the reviews

[@MotionRaceworksOfficial]

If you ever get a chance ask Gary Stinnett and Matt Dadas for their opinion. They love em!

[@CARRIERGUY]

Can ya make some for a 85 c-10. 5x5 lug pattern.

[@MotionRaceworksOfficial]

It’s on our list

[@88_turbo_fox73]

Id love to have a set of tbm brakes on my foxbody but i can't afford 1500 bucks just for front brakes, then another 1500 for the rear, im goin 160 with no parachute and drum brakes lol 4 lug thug still

[@deegan727]

Your setup will work fine……until it doesn’t, then the 3k brakes will prove to be the cheaper option.😂

[@MotionRaceworksOfficial]

We are actually just about to release our 4 lug brakes ;). Totally understand tho, they’re not for everyone and not a one size fits all

[@petermoss4824]

this guy rides a harley w/d00-rags too ...... hopefully these will be self-correcting errors ....

[@henzig8774]

You're forgetting the drag spindles, these don't mount on stock spindles. So another $600-$1500 for the spindles depending on how fancy you get. Great looking brakes though, if I could afford I would lol.

[@motoweenies4431]

you mean the one with no cage or belts either? lmao reassess your goals