TT-01 Carbon-Aluminium Project EP2: Build Vlog 01 - Motor & Pinion Installation, Filling Oil Shocks

How to install the motor & pinion without pulling the rear gearbox out. Plus filling oil shocks.
Parts List: Chassis bit.ly/3NYVnmj
Body bit.ly/3QlZoTZ
Motor & ESC
Brushed Combo bit.ly/3aNMXzQ
Brushless Sensorless Combo bit.ly/3mIx5l0
My Setup - Brushless Sensored bit.ly/3xI19Dq
My Setup - 120A Sensored ESC bit.ly/3zCpdZM
Motor Pinion www.corally.co...
Or just buy Tamiya gears.
23T is the smallest you can use safely. 21T might work if your motor can is not bulky.
Servo, option 1 JX PDI-4409MG bit.ly/2x73Fqz
Servo, option 2 SPT 4412LV bit.ly/3xHhXue
Category: buy once, use forever
Transmitter Radiolink RC4GS V3 bit.ly/3twII26
Transmitter Flysky G7P bit.ly/3Pwjn1z
Transmitter DumboRC X4 (Budget Option) bit.ly/3zyZHEE
Charger SkyRC S65 AC bit.ly/3xnCin8
Charger iMax B6 (Budget Option) bit.ly/3xI1ZQA
Tools
Hex Driver bit.ly/3zDTAzf
Hex Socket, Nut Driver bit.ly/3QinvCD
Reamer bit.ly/3aX6iPi
For battery, shock oil, screws check your local store.

[@BeaversHobby]

My door needs WD40.

[@martintanjung5540]

Owned one, ditched the upper and lower of the front and rear arms to tamiya hop-ups (plastics, adjustable), changed the steering to aluminium (hop ups), changed the front and rear axles to aluminium (hop ups), changed the steering links (hop ups) and restore the P7 to delrin parts (plastics)...

[@wanyusri84]

thank you for sharing.. very cool video

[@ianhill20101]

Shimano brake mineral oil works a treat on rc dampers too.

[@BeaversHobby]

Thanks for the tip!

[@alphawlff]

Those orange stock springs are the length you would find on a off-road buggy. So the shocks won't be compressing too much with them on.

[@BeaversHobby]

As it turned out getting the Tamiya springs was a good idea?

[@alphawlff]

@@BeaversHobby Yes it was.

[@BeaversHobby]

@@alphawlff Thanks.

[@daidan_708]

Great project! What’s the highest pinion I can run on this chassis with the stock motor mount? It’s a 0.6M pitch right? I want to put a 31t 0.6M pinion but I don’t know if it will fit.

[@BeaversHobby]

Yes, it's 0.6M pitch. I don't have the measurement for 31T pinion but I think it'll fit. The 23T that I have on this car is pushing it in all the way so it can fit way bigger than that. Or get some different gears to try out is probably the safest. The biggest pinion I can find on the chart for TT-01 is 28T.

[@brianprice2240]

what radio gear can i use with drift car

[@BeaversHobby]

I recommend to start with a decent one like Radiolink RC4GS V3 (a review of V2 kzbin.info/www/bejne/jJfGiHaAnth2sLs) or Flysky G7P www.banggood.com/custlink/GvG5Ln6aVN (review kzbin.info/www/bejne/sJiZfJWdmJmYpdk ). These can set a knob to a channel so you can control gyro with them. For higher budget there is now Radiomaster MT12 which will come out soon. Hardware wise, it should be good per Radiomaster standard. Software will be a very steep learning curve because it uses EdgeTX. If you are coming from drone or plane you will feel at home. If you are new to this I recommend stay away at all cost. An easy to use transmitter with amazing performance is Flysky Noble NB4. Review here kzbin.info/www/bejne/immZh4uji6iirLc . It's on discount now as well. Here's the link www.banggood.com/custlink/D3mHlA6LV0

[@pietrod2052]

Ciao hai visto la nuova s10 blast tc3 di lrp?? Mi piacerebbe vederla commentata e recensita da te sei bravissimo complimenti per i tuoi video mi hanno aiutato molto con le scale 1:28 touring ora sto cercando di avvicinarmi alla scala 1:10 touring grazie

[@BeaversHobby]

LRP S10 has been a good solid platform for club racing for years so I think that will be a good entry level chassis too.