TTI TP22 Competition Review

[@edwardleonen1442]

I have this one but in 22lr the taurus tx22 competition and this one is cool

[@shovelchop81bikeralex52]

Great review! Love your style of videos as they are simple to the point and cover important tech related info on parts failures and the improvements too that are often ignored by most reviewers who usually don't understand or just want to cover what's written on the box! 290fps... Bespoke have it listed as 340 which is obviously wrong since it's been hot over here (well in Wales anyway) and I assume you did the testing recently. Where did you source your RMR sight? I've had nothing but problems with the ones I have (came with Vorsk pistols and look the same as yours but nothing like the clear dot yours shows) the dots are like Jackson Pollock painting and the lenses are very dark, I normally just use trusty old school open window rail mounted red dot sights on my pistols and SMG's. Not Eotech clones either as they have all been terrible in my experience, the parallax is all over the place and the lenses are again heavily tinted. Cheers!

[@MiddleAgeGameruk]

Hi there, and thank you for the kind comment. As I say as I chrono it, I'm using .25s, bespoke airsoft was useing .2s, so that's why there's a difference. The optic I used was actually from Amazon, as I know in CQB, It's going to get shot out at some point.

[@MrWallaces13]

Thanks for the video- I’ve purchased one and awaiting delivery. Sourcing parts/spares/upgrades = where do you suggest? Apart from unicorn and WGCSHop!

[@MiddleAgeGameruk]

hi there you can try action airsoft as they have a good selection of parts. Hope that helps.

[@silencia08]

It's finally out. just in time for cos I'm about to decide whether to buy in 2 days.

[@silencia08]

Is it made of Polymer like the AAP01 or metal?

[@HomerVanChong]

Aluminum Slide, Polymer Lower

[@Bisqcateer]

I was originally thinking this was a weird design but the more I watched into your video, the better it was looking. Too bad it's a full sized frame because I was actually thinking about selling my Elite Force G19 soon and was hoping I could just keep the mags but they'll be too short.

[@MiddleAgeGameruk]

It's a shame about the mags, but you are right. The more you look at it, the better it gets!!!!

[@juandominguez4831]

Hi midel!! Will the magazine fits the maruyama smg?nice vid too..!!

[@MiddleAgeGameruk]

Hi there, the Maruyama scw9 is amazing smg, but sadly, it is only compatible with vfc clock mags or their own, but the tp22 airsoft pistol will accept most manufacturers mags. Hope that helps!!!!.

[@juandominguez4831]

Hi! thanks for the quick response, I also have to look for a VFC glock 45 or 17 Gen 5

[@toftof1854]

thanks....👍👍👍

[@stubbox8629]

Great video I've been looking at the canik TP9 elite and saw this so which would you say is a better option for a side arm out of these two or possible contenders to this cool pistol thanks for all your feviewsxand video takedowns

[@MiddleAgeGameruk]

Thanks, the canik is a great sidearm with a unique trigger, the tp22 is more of a fast paced sidearm, built for fast accurate shots from the ground up. The only real negative I have is holster compatibility with the location of the rmr but there are holsters that fit. I would say the tp22 is a great primary and the canik a good secondary 👍

[@akittenorcatvideoaday9054]

Can you run red gas in this during the winter?

[@inthendwealldie]

How has that TP 22 held up 9 months later? Junk? Decent?

[@MiddleAgeGameruk]

Hi there, the tp22 is doing good, not replaced any part as of yet. With its optic mount, it's hard to find a universal holster to fit it, but other than that, I'm still happy with it.

[@error262]

Isn't VFC magazine gas route concave and TP22 one flat? So WE/KJW/AAP01 mags should, in theory, work better? edit: the finish on the mag looks like VFC but KJW also uses the same finish, might it be possible that it's KJW? The bb feeding lip is also exactly the same as KJW one and that plastic BB guide matches KJW too. Tho the mag shell itself doesn't match any that's on the market... I'm just really curious who's producing those.

[@MiddleAgeGameruk]

Hi there, holding the vfc g45 mag next to the tp22 and they really are similar, the main missing bits are the stamped glock logo on the mag its self and the baseplate. Looking closer at the nozzle seal on the mag it is slightly concaved but they are reverse compatible with all parts. As for original manufacturer as fare ad I can find through again contacts it it tti or Titanium Tactical Industries. They are the original designers of the AAP01 for Action Army. As for we mags etc.. they should fit too I know Action Airsoft have tested it with we, vfc, marui, and aap-01 mags and all fit and feed well. Hope this helps, my main hope is this pistol dose well as from my testing it is a great shooter, especially for the speed softer or target shooter.

[@GaosenKinetics]

@@MiddleAgeGameruk The design team is TTI which is as you note the original designers for the AAP01 who then left Action Army and made their own company, but this gun is an ODM project for Taiheng Toys (also known as USHOT, a brand they sell some aftermarket slides and the like under; the second batch on of TP22 actually also are sold with USHOT branded boxes I believe) who are the largest VFC wholesaler in Taiwan with a close relationship, so I'm sure the magazines are indeed either OEM from VFC (or could be direct from the same factory as VFC, but most likely just ordered via VFC) since there's no reason to make entire new molds for a G-series airsoft mag.

[@hsu5120]

The magazines are funded by Taiheng Toys, with TTI providing the technical expertise. It has no relation to VFC. The closer resemblance should be to AAC magazines since they are designed by the same design team, and it's natural for the designs to have similarities.