TUF-2000 series Clamp on Transducer Installation Instruction

[@user-nq7xh5kn3m]

Very informative, 😃, thanks 🎉

[@user-vp3ym4wo7b]

Hola que tal buenas noches quisiera saber cual es la distancia en la que pueden estar los transductores del equipo

[@user-it9ew5vz8d]

kzbin.info/www/bejne/hn_alX-snbZniK8si=IGO7-DG40pExKwWd

[@pablozuniga5819]

hello, ¿Do we can control other devices with the flowmeter i don' know for example a engine of C.A

[@smallgoon]

Can you change the setttingss on Modbus RTU if needed?

[@Ladiesman7790]

Sir, if the water rate in the pipe isn't stable (because it's being pushed with a diaphragm pump). Will it affect the measurement process?

[@Etalon-RM]

For technical measurements with unstable flows, it is better to use ultrasonic flowmeters

[@marombado69]

Is this device for water only or does it support liquids with more viscosity and high temperature? I work at a glycerin refinery and we have difficulties with our flowmeter. Would it be appropriate to substitute this model?

[@eltangguhdaulay5808]

Hello Cherry Wang... can you guide me, how to choose languange in english model TUF2000B

[@RodrigoSilva-rj8ux]

Hi, How connect level sensor 4a20mA?

[@rudiherwani3809]

Can use for fuel oil?

[@microflowmeter]

We can provide flow meters suitable for fuel oil😜

[@fadelmuhammadsaputra3948]

Mantap mas

[@billylee5702]

4:21

[@user-wt1mw2un1c]

😢😮i

[@md.kamruzzaman3248]

Great 😂

[@arkenshinagustin549]

my ultrasonic flowmeter has no reading with signal strenght of 56.4 and Q of 11, ill try to grind same u did but indicate poor signal strenght could you help me please...

[@cherrywang9433]

my email is [e-mail], pls send your problem to my email, better with photo of your wiring diagram.

[@kuqezi294]

I have the same problem, can you help me ?

[@adduryend9225]

@@cherrywang9433 can you share your WA number ?

[@mahmoudshaheen3995]

Move clamp little to get good strength signal

[@kuqezi294]

Hi, I have a problem with the transducer spacing. I can't put the distance. It is blocked. And also it's written no signal. Can you help me ?

[@imamkopi7952]

Input parameter is correct but why the signal still poor???,,,can't normal...and also not detect the fluids

[@zimin_ch]

Hi! Did you find out what was wrong? I have the same problem

[@imamkopi7952]

@@zimin_ch it only works on pvc pipe..the reading works well flow looks well but the accuracy is far from accurate more than 20% volume but maybe you can fix it,,,,for another pipe material it almost impossible to look for the correct flow number,,,,

[@zimin_ch]

@@imamkopi7952 Thanks for the reply, I didn't have any luck testing with pvc inside my house, but I'll be doing some industrial testing this weekend. I'll keep you updated

[@vinoriyanto2608]

Mana hasilnya tida ada

[@mariosilva9231]

which is the programming language? english or chinese

[@jennyliu4175]

It can be English.If you need ultrasonic flow meter you can contact me [e-mail]

[@HikariDewi]

what type of cable used?

[@meshackmutulu5300]

how to get this meter manual i need manual

[@SBA0348]

you can reach that manual from our web site adress "aktek.com.tr/product/ultrasonic-flowmeter-calorimeter-tfm2100-ng/" but only its name is TFM2100-NG

[@miguelangelgutierrezcacere5886]

good day because you can not install your software on my pc, I have the tuf-2000-h, I downloaded it from your website but I can not run it

[@HikariDewi]

me too

[@RodrigoSilva-rj8ux]

Hi, How connect level sensor 4a20mA?