Tundra wheel offset and tire size tutorial

I am not an expert but I have a lot of experience with wheel/tire setups on the Tundra.
if you have anything to add, comment below!
Apexoff-road.com

[@psycho-nutkase9233]

Please notate that rim width will dictate offset, offset is measured from the center line of the rim. meaning if you have a 8.5" cut in half 4.25" on each side is 0 offset, a 9" wide rim cut in half is 4.5" on each side at 0 offset. That means in poke wise if you where to side by side match a 8.5" and 9" with poke a 8.5" with -12mm offset would sit the same as a 9" wide with 0mm offset or vise versa 8.5" wide 0mm offset would be a 9"wide +12mm offset.

[@WonderWoman1992]

Love this video thank you! I have a second gen tundra and trying to find the right offset

[@Apexoffroadpower]

Email me and I can get you setup. [e-mail] Apexoff-road.com

[@evanjenkins263]

Hey I’ve got a question about my 00 access cab. I want to run 285/75 on my 16x8 wheels. They have about a 4 and 3/4 backspacing. I have a 2 inch lift in the front. Not sure if it will fit?

[@diggerloader]

Just the info i needed for my Tundra. I have an ARB front bushbar and a Warn 12k lb winch but will soon but upgrading my front suspension to an Old Man Emu 3.5 inch lift and needed to know what the best offset was. 25 seems to be the magical number then.

[@marathonbaker]

What offset would I need to fit 285/65/18 on a stock tundra? Might do a small 1.3-1.9 6112 lift but trying to leave clearance for my garage.

[@valiantthor-]

Great video! Where did you purchase your custom fender wells?

[@Chris_Madel]

Thanks man for your video its very helpful to me im just about to start getting quote for my tundra and i dont have idea about the offset so thank you again

[@Apexoffroadpower]

Email me if you have any questions. [e-mail]

[@gavinmccandlish1710]

So I’ve been doing a lot of research and I haven’t been able to figure it out. I have 18x9 + 18 offset rims and am going to be doing 3.5 maxtrac spindles as well as icon Coilovers to sit around 6 1/2 to 7 inches of lift, I know with the maxtrac spindles I’ll be kicked out an inch from the stock spindles but I’m trying to figure out if I will be able to fit yoko x-at 37/13.50s with the backspacing on my current rims.

[@jamesd9534]

Can you mount 33x12.50r17 tires on a 17x9 rim ? I want to put 33x12.5 tires on the 4Runner 17x9 TRD rims. Thank you !

[@rockothomas8922]

So I have 33’s/12.5/r20 assault wheels. +20 offset and I just order the 3.5 rough country lift kit. Do you think my wheels will poke out

[@dieselwrench3621]

Will a 12x9 12mm offset fit a 2024 tundra platinum? Thanks.

[@crazyboi-1234]

Hello, I have a 2000 tundra 4x4 SR5 I bought Mickey Thompson baja boss Mt's 33×12.5 ×17 I have a 3" lift what kinda set up do I need to clear everything? Thank you!

[@danielcalona9822]

Hi can I fit a 18x9.5 +12 with a 33x12.50 without trim the metal

[@balkee42]

Will the 25 offset sling crap down side of truck?

[@mef736]

Where about in Texas is your company out of? Im in San Antonio area and looking to try and get a local business to help size some tires and see if they fit before buying.

[@Rydrdg]

I'm getting steering wheel vibration when at 55 to 65mph. I tried rebalancing the tire plus alignment but no luck. My rims are 18x9 0 offset 285 65 tires falken at3

[@rickwood7363]

Splash guards are rad! Who makes em?

[@jeremeywright]

If I to run 33by12.5 on my 2021 tundra with a 3/2 ready lift on a 20 inch wheel what offset so u recommend I get so I don’t rub? I would like to leave my factory mud flaps on also thank you for your help.

[@Apexoffroadpower]

No offset will get you that. 35s will always rub but with a BMC and aftermarket front bumper will help and go with about 0 to +20 offset. Also go with a 11.5 wide and that will be less prone to rubbing. But keep in mind all these trucks sit different. Email me and we can go over some wheel options. [e-mail]

[@dreb.02TV]

would this be applicable to sequoias?

[@14usair]

I’m trying to get 37x12.5x17s on my 2020 tundra and just can decide on offset 0 or -10. You said you’re at -5 and those tires stick out a lot more than I would like. Is this a situation where I’m going to have to get fiberglass finders to cover these tires? I don’t particularly want them to stick out. Would still like them to tuck for articulation and what not.

[@Apexoffroadpower]

Mine are +1 so going with a -10 but 11.5 wide tire they will probably stick out kore than mine. Go with like a +25.

[@briancrowe3543]

I have a 2019 tundra and I’m wanting to run a 20 with a 35x12.50. What offset will I need for my tire to stick out approx 2” to 1.5”…

[@Apexoffroadpower]

Around zero offset but you will need some lift.

[@izzyc8458]

Nice video, question I have an existing RC 6” lift on 2007 tundra 2wd. Currently running 35” x 13.50” x 20” Nitto no issue with rubbing. What will I need to do to get 37” x 13.50x 17 tires on it?

[@Apexoffroadpower]

You cannot run a 17 on a RC kit because of the knuckle design. Email me [e-mail]

[@benjaminharlan6214]

@@Apexoffroadpower really? I’m currently on a RC 6 inch with a 3 inch body and have the 37x13.5x22 that I bought it with. I want to ditch my 22’s and was about to pull the trigger on some method 17’s with 0 offset. Would I be making a huge mistake?

[@Apexoffroadpower]

@Benjamin Harlan yeah you can't, you can ask the as well to confirm. Also I am a method dealer. Hmu for pricing. [e-mail]

[@creamthebarber]

Great info man. I’m shopping for new wheels and tires. Found a seller selling their 20 in Fuel wheels with 37 off road tires. You think this would fit my 2015 Tundra without issues?

[@GSMIDALIVE]

You will have MANY issues if it is just a stock tundra

[@creamthebarber]

@@GSMIDALIVE Got it. Thanks. What about a 20 in rim set with 33’s?

[@GSMIDALIVE]

Depends on the offset but as a general rule you’d probably still need to do some trimming on a stock truck

[@creamthebarber]

@@GSMIDALIVE For sure, but you think I’d be able to get away without having to get it lifted? Can I run 33’s stock?

[@Larrybobangles]

@@creamthebarber yes

[@TOWENCOUNTERS]

hello there what year is your truck and what type of bumper guard is that one?

[@Apexoffroadpower]

2012 nfab pre runner. Email me for pricing [e-mail]

[@lcotto2064]

I have a 2016 Toyota tundra crewmax. Not lifted will I be okay with 18+offset. I'm running 275/55/20?

[@Apexoffroadpower]

Check this out facebook.com/groups/AllOutTundras/permalink/812246862314414/

[@tonybologna139]

So with 33s and +20 offset would still need lift kit so no rubbing?

[@Apexoffroadpower]

I would do a leveling kit to fit comfortably

[@0MAR5AL1NA5]

I've got a 2014 Crewmax with a 3 inch lift. Currently running 33x12.50 20x9 I believe. About what offset is perfect to stick out a good inch or two?

[@Apexoffroadpower]

Around a +20 to +25 is usually safe.

[@modimmusic9571]

The more Negative the offset, the more it sticks out. I run a 35x12.50 20x12 (-44 offset), sticks out about 6” from fender. 20x10 are roughly (-24 offsets) which sticks out about 4.5” from fender. You’re 9 wides, which should be a couple inches out the fender. Mines are on a Dodge Ram, so they may differ on a Tundra.

[@0MAR5AL1NA5]

@@modimmusic9571 yeah I stick out about an inch but would like another inch or two without rubbing if possible. On my cummins I stuck out about 2 or 3 inches with -25

[@Rickwynne]

What wheels are you running? Those are beautiful

[@Apexoffroadpower]

Thanks man! Fuel coverts. I have them on sale rn.

[@cristiancamberos5]

I just bought a 2019 trd 4x4 . And the PSI light it's on... they said it was the aftermarket wheels and mud tires .. how do you fix that ? Thank you

[@Apexoffroadpower]

Probably missing the sensors or 1 is damaged.

[@cristiancamberos5]

@@Apexoffroadpower thanks

[@Hoonigan_Honda94]

Do you think a 17x 9 with -12 offset would be fine? Also would be running 35x 12.50 tires on a leveling kit

[@texanerection492]

That’s gonna be tight as fuck my man. Idk what you drive, but might need some trimming.

[@Hoonigan_Honda94]

@@texanerection492 I ended up getting 34 1/2 inch tires with +1 offset wheel they rub a little bit but not bad. 2010 tundra

[@texanerection492]

@@Hoonigan_Honda94 nice. I just ordered 295/70r18 (34.2/11.6) with +18 offset. I have a 2 inch level up front. Think it’ll rub? Shop said I need BMC and bumper spacer

[@Hoonigan_Honda94]

@@texanerection492 I have no clue but I don’t see why you would need a bmc with +18 offset

[@texanerection492]

@@Hoonigan_Honda94 shop is probably trying to upsell me. I’ll probably just do a test fit up front to see how close they are. Even if I have 1/4 inch of clearance I’ll probably get a BMC. Wouldn’t want them to catch while offroading.

[@carsonsinger27]

I have a question can I run Nitto Terra’s 35x11.50-20 on my 07 tundra?

[@carsonsinger27]

Nitto ridge grappler’s*

[@Apexoffroadpower]

What what and what size lift?

[@carsonsinger27]

@@Apexoffroadpower it just has a 2”level but I’m running 285/65-20 right now with a few inches of clearance but the tires I have on it right now are junk and I was given a good offer on some 35x11.50R20 Nitto ridge grapplers

[@vumsang9746]

My order just like your wheels but black red 20 offset? What you think

[@Apexoffroadpower]

Sorry I don't understand your question?

[@vumsang9746]

@@Apexoffroadpower I order wheels i would get soon just like your wheels brand fuel 20offset. I’m trying you to understand my pitiful English tires size 35/12/50/18

[@Larrybobangles]

What offset wheel gives the slightest peak out the side? Would ideally like something a little less than yours

[@Apexoffroadpower]

+25

[@Larrybobangles]

@@Apexoffroadpower thank you! Sweet ride

[@Larrybobangles]

@@Apexoffroadpower Isn't a positive offset suppose to bring the wheels in more? Im sorry I just don't get this shit.

[@Apexoffroadpower]

@Larrybobangles yes. Factory is about +50. Mine are +1 so a +25 will stick out slightly.

[@Larrybobangles]

@@Apexoffroadpower well that makes fucking sense. Thank you for the taking the time to respond. I appreciate it.

[@KurNorock]

I'm trying to run 37x12.50 tires on my Tundra. I also REALLY want to run 17in wheels. And I also REALLY want those Method 700 series wheels with the bead grip ridges. The problem I am having is that Method only makes those wheels in 17in with a +35 offset. If I want a +25 then I have to move up to 18 in wheels which I do not want to do for many reasons. And so far I haven't found anybody who can tell me if +35 will work or if it brings the tire in too close to the UCA. I checked it out on an online tire size calculator and it says that the 37s with a +35 offset will be 0.13in further away from the suspension than my stock tire on the stock wheel, which isn't much, but it is in the right direction. But I don't know if that's enough clearance once I go to a taller tire. I will be lifting my Tundra 3.5in with the Ironman4x4 foam cell pro kit. And yes, I know I will need to do a body mount chop and some other trimming and probably remove the sway bar. That's not a problem for me.

[@Apexoffroadpower]

Email me [e-mail]

[@redman2751]

Hey I’ve got a set of 17” icon wheels with +25 offset with Toyo open country 2 37” tires. Pretty sure they are 13.5” wide. I’ll have to double check that though. Sitting at about a 3.25” lift. BMC and off-road front bumper for clearance. No sway bar.

[@SCTundra11]

FYI make sure it fits in your garage. Find a good alignment shop.

[@RealCptHammonds]

How much is your speedometer off?

[@Apexoffroadpower]

Over 40 Mph it's about 7 to 10 off

[@josepires4345]

Actually they are +60 offset on that year Tundra

[@58mosh58]

You should fix that camber angle.