TunerPro_Getting_Started.avi

Getting started with TunerPro. Cover the basics, from downloading, installing, setup, and a few tuning basics.

[@docfischer7291]

I know that’s it’s a few many years late but whomever is in 2022 and trying to download the program (I downloaded RT) I had to use Microsoft Edge. The easier the program to set your firewall and blocked programs the better . I suppose it’s not registered through Windows so it boots it out as a virus. Awesome program. Wish I had this one for the older Ford eec vi systems back to in my diaper days . Gotta love the old days of development.

[@ianhowe007]

Here we go now this is a real instructional video thank you so much

[@cmarchione1]

great video. I looked at your other video and saw the Hutchinson island stuff. I'm in Savannah. Small world.

[@yoyosfpv823]

I’m new to all this so this video is going to help me allot

[@fulltrottle123]

Thank u for this informative video. I'm just starting to educate myself with this program and you made it a lot easier to understand. I've been trying to figure out a way to delete my secondary air pump during cold start since I now have a catless system on my vehicle. Based upon your recommendation I think I will go with the paid version.

[@lankybloke5915]

Thanks for this - good video, encouraging for a total newbie like me, and makes it clear how to actually change something

[@LexSpeed]

Hi, can tunerpro get the .bin .xdf needed files from the stock ecu?

[@azumaninjay]

Thank you so much for this.

[@shinobi1203]

great video. thanks for the start

[@itsjustasix]

These are great vids! Waiting for more of your training & tunning basic vids. Keep the vids coming.

[@austinalba4170]

Can the free version of tuner pro, the non- RT one, connect to cars? I have no acquisition file like you do, nor do I have the status bars you have on the bottom left

[@angry_bullet_pro_chip3646]

why do I have engine speed in my tuner 4800 5500 6000 6500 and the map that I want to configure in the tuner pro, the engine speed is 4800 5100 500 6070 6080 what should I change in the settings so that the speed for the settings is the same

[@EdwinWebsterFilm]

thanks for the EGR stuff!

[@cj7girl280]

Thanks for sharing this video.. VERY EXCITING!!! Would there be any chips available for my mod? I have a 1976 cj7 jeep with 258 4.2l I6 and a gm TH400 3 speed auto.. I Installed a GM TBI off a 4.3L vehicle (OBD1) with ecm #1227747 and chip # ASKA I currently dont have timing control for my ecm (just fuel).. But hope to get a chip that will do both fuel and timing control . Also, where can I find a flashable chip, and burning adapter, how much should one expect to pay for this?

[@Kyle-jb3hr]

wish they had a code59 site for motorcycles

[@thewt]

How are you connected to the vehicle's computer? Are you using an OBDII to USB adapter? Or are you using a special cable for that specific make and model?

[@dragan3290]

I think he is using an ALDL cable. Made for GM obd1

[@TEAMCREAM_96]

Thank you for this

[@ebeaulieu813]

Just bought this software and obd1 connector. I had no idea from the EBAY store what this entailed to get it to work?????From the site I spotted it could be used on a tablet as long as the was obd2 which I verified. That's what I wanted to use but downloaded to the tablet the file cannot be opened??? So I installed on a WIN 10 laptop. Little did I know what else I was in store for. So here I am at this video realizing there is a lot more to this software and the narrator is blowing through it like GREASED LIGHTNING???????????????

[@jeyanthitherce7274]

Thanks sir

[@PD-ez4ue]

Code59.org is down is there an alternative?

[@lucysmith4242]

Seems fine now

[@LuckyMcIrish92]

It’s back up

[@motoxreprogramacaoeletroni3158]

alguem pode me ajudar , fiz o download e cadastro do tuner pro RT , porem nao consigo dar continuidade , alguem sabe me dizer se ele ja vem com algum modelo de xdf ou bin e como posso encontrar . costumo fazer alterações em motos da marca Honda . se alguem puder me ajudar eu agradeço muito , qualquer informação de vocês sera bem vinda . muito obrigado !

[@DennisKa24]

Awsome guide, I just downloaded the program. Could you tell me what parts i need to get my computer hooked up to the ecu?

[@DFVerte200]

I have a 94 Nissan 240sx, but since its a 4-cylinder do I need a 4-cyl bin

[@dwhitecornishbiofuel]

I want to make a bin or file for ethanol. I'm using a V6 2.5 Ford Mondao

[@unluckiestnumber7172]

it's great if you can find or are smart enough to make an xdf

[@matiasromero1213]

Hello!! great video my friend, but i cant download de file in code 59 , can you share it via email?

[@aldosoria]

Hi very good video Have any information as to create the tables and data to view. I have a computer with Moates emulator but I want to know how to create tables to change the ecm thanks

[@thangamajig]

A fella once told me,,, If you want it bad enough, you'll make it happen.

[@thangamajig]

it's pretty damn confusing though when you go to code59 to download XDF and ads files and it just looks like a forum topic page

[@thangamajig]

Hey,, How about an updated vid....

[@JohnnyAnderson1]

same problem here

[@thangamajig]

I found the xdf some where else . Bin file too.

[@JohnnyAnderson1]

I found it also but now I cannot get winflash to load properly on my computer...... its one thing after another..

[@MrEsigward]

Can I load the bin that is existing on the vehicle?

[@Gangsta06001]

yes you can. check the vid of bavarian and beyond channel

[@Solidsnake0208]

Not that I'm looking a gift horse in the mouth... this is a good video But why go into the detail of explaining how to install the software without explaining what a BIN or XDF file is?

[@Eric-tc9mh]

666 likes lol

[@edgarcrain6917]

YOU go to fast

[@creepycrawler4690]

If you're not going to take the time to answer people's questions, then don't bother with the video.

[@jr007r1]

Terrible. As clear as mud.

[@samuelheller1879]

absolutely right. THESE electronic guys think EVERYONE IS AS VERSED ON THE JARGON THAT THEY ARE. MOST of us are just trying to fix our !@#$&*() car. USER-FRIENDLY does not apply HERE