Tunerstudio Standalone ECU Tuning Guide | Part 10: Setting base timing & Idle Tuning | Megasquirt

[@tragedygaming3186]

Thank you again, there is so little support on youtube for speeduino its ashame, underappreciated.

[@throttlebuddies6356]

Absolutely. You can use megasquirt guides in most cases though thats kinda a plus at least.

[@Mister_G]

FWIW: From a background of industrial controls, I think you have way too much 'D' in that PID setup - it makes the control 'shy' away from the target which is why it it taking so long to settle. (My default is to set 'I' and 'D' to zero, then to increase 'P' as much as possible before the output becomes unstable. Likely the output will not match the set point, so add some 'I' until it does. Then look at transient response - if it is too sluggish, add some more 'P' and a little 'D' to control overshoot. It is as much an art as a science, despite what the test-books say.) Great series of videos though - Thanks.

[@throttlebuddies6356]

Thanks for the input. i will try that, but the way i have it set up currently works very well. i have tried around lots of different settings but the one im at especially for EGO control works for this application.

[@throttlebuddies6356]

As always if you want to know specific details, need help, advice or tuning services, hit me up on instagram: instagram.com/_throttlebuddies/ If you want to show support for what i do + some benefits, check out my patreon: patreon.com/Throttlebuddies?Link

[@bullshibik]

how did you get a main pulley like that ? i was looking for it,cant find one

[@throttlebuddies6356]

like what? what do you mean exactly? came stock on the engine like that.

[@esbrasill]

I'm just doing some checking on my trigger wheel+cam wheel (subaru 6/7) setup. I'm cranking with injectors disconnected. Some indicators light up, the "No Sync" shows green. Does that mean it's good (green) or there is no sync (Bad) ? Btw, First time using a programmable ECU

[@throttlebuddies6356]

if you are seeing rpm its already a good sign. usually when no sync lights up its not too good, though ifthere is only a crank trigger there is no synchronisation.

[@rojektia-pukkaa]

Any idea of Bosch ICV frequency (those used in BMW M20 engines)? And how does the frequency affect? I'm struggling to get my M20B23 to idle low enough, it just wants to idle at 1200-1300.

[@throttlebuddies6356]

if you have problems like this, check if your throttlebody is closed completely first and that you dont have any vacuum leaks in your intake manifold normally an engine shouldnt be able to run when the IAC is at 0 % DC

[@rubensan40]

Hey men is a only trigger wheel cam of 24-1 ??

[@throttlebuddies6356]

@@rubensan40 what? I dont really understand what you mean