Tuning the low and high speed needle of your nitro engine . Kyosho mp9 tki4. Good and bad signs

Here is a video showing the signs of a good and bad setting of your nitro engine .
Old videos which I put as one . Skip to 2.44 for a look on the low speed needle .
Showing the settings for the high and low speed needle and how to correct them .
Subscribe for new content
#nitrorcbuggy
#nitrotunin
#kyosho
#mp9tki4

[@Yroc5000]

Best tutorial for high/low speed needles right here

[@dozyrcworld3847]

Thank you . Glad it helped

[@AllAroundTheClock247]

Awesome video. Straight to the point. You Are The Man

[@Joell-uf7gs]

Most helpful video I’ve seen about nitro cars just trying to get in to it just bought one thank you for the tips

[@dozyrcworld3847]

Awesome I’m glad it can help you . Any problems please contact me will be happy to help you .

[@jonodamafaiadon9937]

The best video for me on tuning thus far!! Less talking, more explaining ppl

[@user-qf1gk4ed5z]

Best explanations I've seen, thank you!

[@GavinY]

this helped me diagnose lean low speed, best video, straight to the poiny

[@dozyrcworld3847]

I’m glad it helped 🏎🏎💨💨

[@guzziman96]

Insanly easy and notimewasting video, well done!!

[@dozyrcworld3847]

Thank you . That was my point sort and simple and explaining

[@johnbravo7542]

Very well explained,very good video.

[@justinchan2096]

I think I can tune an engine now ...💪💪💪

[@Hitman-os1sp]

Very good and helpful tutorial. Thanks.

[@dozyrcworld3847]

No problem I’m glad it can be of some help

[@tnpa3769]

Thank you for share , is Avery good guide to set my nitro buggy. 👍🏻

[@sermecanicmoura]

Best of the best. Great theacher.👍

[@Rc.pipesmoker]

This is just what i needed as I’m about to buy my first nitro

[@dozyrcworld3847]

Awesome which one are you getting ?? Any problems please message me ,

[@Rc.pipesmoker]

@@dozyrcworld3847 I’m on a budget as I’m a cater for my wife so a hpi warhead

[@dozyrcworld3847]

@@Rc.pipesmoker awesome good one to get into the hobby

[@Nick.Tran7777]

It’s very good ! Nice bike !!! I like it - thanks you

[@Fed--wr8nb]

I have same buggy huge help

[@louieolalia7718]

Good job sir. Thank you

[@dozyrcworld3847]

No problem I’m glad it can help you 🏎🏎🏎💨💨

[@godsun358]

Very understanding even though not a word was said

[@dozyrcworld3847]

Hey you understood tho 😉😉

[@godsun358]

@@dozyrcworld3847 for sure best turning vid I've watched

[@jdportwerks6795]

Only part that confused me was at the end where you said if you pinch the line and it takes longer to quit than either richen it up or lean it out but which needle were you talking about were you still concentrated on the low speed needle?

[@dozyrcworld3847]

Yep pinch test is to do with the low speed needle 🚀🚀🏎🏎

[@jdportwerks6795]

@@dozyrcworld3847 great👊

[@favulus1]

my kyosho engine is totally oout of tune. how many turns from closed should each needle be to start properly tunning my engine. it is the ke21 rtr version

[@hizzleman4111]

Great video. Only one thing, why didn't you trouble shoot the idle?

[@williamrasen4318]

THE BEST

[@bobeden5027]

engine stalls when I remove igniter?

[@leonardosena6338]

Thank you! I got one MP9 tki3 with the KE21SP, without box and manual. How many turns from closed position, to achieve similar results of the video? Thanks alot!

[@denisdenis2034]

no engine is the same as the other

[@sendit2873]

you never touch those screws until you get to full temp

[@dozyrcworld3847]

Good job it was up to temp . Heated it with engine heater before starting this vid .

[@foisamika5564]

hey any suggestions to fix idle issues? my one will idle for 30secs then die out?

[@alteredstate7746]

Thanks

[@dozyrcworld3847]

No problem

[@alteredstate7746]

@@dozyrcworld3847 really struggling to get my kyosho buggy in a good tune.. it barely idles for a few seconds then goes off ... and then when i have full trottle it sounds like it gurgles ill try fix it over the weekend

[@dozyrcworld3847]

@@alteredstate7746 make sure the idle gap is around 1.5mm if it’s set to that then it has to be the LSN (low speed needle ) try to lean it out more .

[@alteredstate7746]

​@@dozyrcworld3847 much appreciated

[@jeffgrizzle5476]

What is a good engine temperature to run?

[@dozyrcworld3847]

Hello sorry for the late reply I like to keep temps between 220-275F .

[@mugenseiki514]

What brand is a spark plug or its size Os P3 Or Spark plugs of Other sizes

[@brockclark6989]

My nitro is bogging down when I’m on the gas could u help me

[@davidwright4460]

Just subscribe and like best video

[@frodestrm9910]

Is the pinch test done on a warm or cold engine?

[@dozyrcworld3847]

Warm

[@frodestrm9910]

Thanks 🙏

[@RustybeltRC]

What percent of fuel were you using?

[@dozyrcworld3847]

Hello using 25%

[@denisdenis2034]

Hello I don't want to be mean, but since I've been a 2-cycle engine mechanic for over 50 years, I can see that you don't know anything about it. You should remove your video people will seize their engines. I've never seen such a bad way to adjust a Nitro-powered carburetor. Sorry but it's the truth!!

[@dozyrcworld3847]

Thanks for your comment much appreciated 👍🏻👍🏻