TURBO COROLLA GETS SUSPENSION UPGRADES!

**Some links are affiliate links that I earn a small commission on**
- HEAD FLASH LIGHT: odelfi.com
REAR SWAR BAR LINK: ebay.us/CqaRx9
FRONT STRUT BAR: ebay.us/zl4ZDU
ALL MODS ON THE COROLLA:
Wheels: amzn.to/3WKgcGd
Tires: amzn.to/3H1eaLH
Borla exhaust: amzn.to/3OJDeg2
Brakes: amzn.to/3kC07VC
Coilovers: amzn.to/3iX91wl
Rain visors: amzn.to/3wmMJak
Hyper dip: amzn.to/3D66kzk
Rear spoiler: amzn.to/3HolsdV
Brake light vinyl: ebay.us/sbgRrd
Headlights: amzn.to/3GSDUd6
Fog lights: ebay.us/Bl2gms
Tail lights: ebay.us/f2O3rD
Bumper lights: amzn.to/3XNuLcL
Body kit: ebay.us/Qh9cbV
Tow strap: amzn.to/3WoJidW
Hella horns: amzn.to/3GSEEyU
Hella horn harness: amzn.to/3D6wBgO
Hood struts: amzn.to/3iUI38F
Cheap radio: amzn.to/3wmoE3r
Idoing radio: ebay.us/FTFI02
Flasher relay: amzn.to/3XQwCxo
Backup camera: amzn.to/3XQ1nCJ
Front camera: ebay.us/nqQnNu
Keyless entry: amzn.to/3H0DRMx
Dash cam: amzn.to/3wnRUXK
Sub/ amp: amzn.to/3J5Tjtq
Vinyl floor: amzn.to/3J4bxLZ
Pedals: amzn.to/3QVGFz7
Carbon fiber vinyl: ebay.us/LQ8WxN
Dual USB: amzn.to/3D5LPmt
Steering wheel cover: www.eastdetail...
Arm rest: ebay.us/FX6hUE
Short shifter/ bushings: www.monkeywren...
Cold air intake: ebay.us/9ZKDiz
Tune: amttuning.com
Catch can: amzn.to/3XvMHci
Catch can hoses: amzn.to/3XtegCN
Turbo kit: www.turbokits....
------------------
DISCOUNT CODE: BRANDON75
Seat covers: www.clazzio.com
DISCOUNT CODE: COROLLA5
Performance solenoids: www.redbullet.net
DEALERSHIP LEVEL MANUALS WITH eMANUAL:
shrsl.com/3zta2
STAY HYDRATED WITH LIQUID IV: glnk.io/8ln02/...
20% DISCOUNT CODE “BRANDON_STELLMACH”
BEST FLOOR MATS 3DMATS: bit.ly/3yWWQVs
10$ DISCOUNT CODE: BRANDON3D10
LED LIGHTING LASFIT: lddy.no/1fplh
15% DISCOUNT CODE: BRANDON15
------------------
*Some of the links are affiliate links that I make a small commission off of.
» » » » » » » » » » » » » » » » » » » » » » » »
Business Inquiries, contact:
[e-mail]
» » » » » » » » » » » » » » » » » » » » » » » »
*UPDATED LINKS*
Camera Gear I use:
DJI ACTION 4K: amzn.to/45BVu0M
TRI-POD: amzn.to/3MZASYP
SUCTION MOUNT: amzn.to/3OJkD3C
INSTAGRAM: / justa_yota

[@Misplaceddd]

In my opinion you deserve alot more attention towards your build on this corolla its super sleezeee! Keep it up! :^)

[@connecispitz4697]

No fr he does

[@BrandonStellmach]

Thank you! I really appreciate it! 😊

[@Federicocaviar]

Fax

[@Ferox]

Definitely going to be one of my next mods. Awesome vid man 🔥

[@BrandonStellmach]

Thank you! Definitely recommend! It makes the car feel much nicer around corners!

[@raiderznation]

Installed my strut bar late last year and I must say it's a noticable improvement on the driving experience. Glad I did it especially for how cheap it is. Installing it was a pain though.

[@BrandonStellmach]

Yeah for the cost it looks and feels so much better then the stock one! But the bolts definitely are a pain to get out! That’s why I would recommend a decent impact and a breaker bar!

[@The1Music2MyEars]

Just for everyone reading, use PB penetrating oil first. Spray those bolts down for a few days to really marinate those bolts and it'll be easier.

[@correya.lettsome4702]

In my experience a front strut tower bar increases the precision of the steering. The rear sway bar needs to be broken in. After it's broken in that's when you start to feel the improved rotation when you take a corner. Driving over gutters and uneven roads is when you notice how much chassis flex you lose and the car starts to pick up a wheel or I should say not allow the wheel to droop as much. Installing both at the same time makes it hard to explain the difference you feel. I started with the front strut bar. Then I added a rear strut bar.... Next I did my struts and then finally I added the rear sway bar so I could experience the incremental changes. Then last I increased wheel size and performance tires.

[@BrandonStellmach]

It’s good to know what to look for! Yeah it would have been better to do them in sequence so I could feel the difference, but all I can say is the steering feels better and the body roll has gotten better from doing both of them!

[@Skaterdrifter]

You're killin it my guy. Much respect.

[@BrandonStellmach]

Thank you! 🙏

[@neontownescape]

Very nice. I only have the rear strut brace installed, it felt noticeably stiffer right away. Waiting to get coilovers before I go with the front brace.

[@BrandonStellmach]

The coils overs make a big difference as well! They make the car much stiffer. Which is a good things and a bad thing depending on how you want your car to feel!

[@neontownescape]

I drove around Fukuoka with a dude who has coil overs on his Auris, where you could twist a knob to make it stiff or soft. Tein or BC racing seem to be the choice for me when that time comes.

[@zafersaygl1650]

Dude I watched almost all the corolla videos. You are doing a great job. I have the same corolla but mine has a 1.4 diesel

[@BrandonStellmach]

That’s awesome! Love seeing other corollas! Especially the diesel ones. We don’t have those in the US. But Thank you, I appreciate it!

[@Motorsportsgeek]

Nice, I put a rear trd sway bar on my yaris pairs with lowering springs and kyb shock, its a go kart. If it had more power it would hold up in corners with my corvette, it was actually flatter in the corners before I put some bilstein struts on the vette. I need the engine to blow up so I can swap your 2zr with a turbo but these damn toyotas last forever.

[@BrandonStellmach]

Yeah these Yaris’ are some pretty small cars! And you do some suspension work on them they probably handle better then a lot of cars on the road! And I know the Toyota energized never blow up! But once you out a 2ZR with a turbo it’s going to be a crazy fast car!

[@hamdanahmad5364]

I hope to increase the power of the car

[@BrandonStellmach]

The corolla is really fun with some more power!

[@jaredpusch]

I just recently did both of them upgrades definitely notice a big difference 09 Corolla XRS 2.4 L

[@BrandonStellmach]

This was definitely a great upgrade!

[@theuncanspan]

Is it possible to install a turbo on a 1.6l Lancer EX? Some people told me it's not worth it.

[@BrandonStellmach]

I’m not very familiar with those, but I know that the Evo’s had a turbo. So if it’s the same platform you should be able to do it!

[@christianalfaro6895]

When I installed my strut bar, I HAD to remove the cowl and metal one because my box wrench couldn't even loosen the bolts. Were your bolts easy to unscrew?

[@BrandonStellmach]

Mine were not that bad, luckily I have had put coilovers on my corolla about 2 years ago. From what I remember, when I tried to loosen up the original bolts they were really hard to loosen.

[@kidmanila2160]

You should just put Christmas tree lights wrap it around your body then you will have a lot of lighting when your under your car

[@BrandonStellmach]

😂 that is a great idea!

[@dylan_callahan31]

How have your coilovers been holding up? I’m thinking of getting the same ones

[@BrandonStellmach]

I have probably had them for almost 3 years and no problems or complaints!

[@jaheemsheik6011]

Do you have any plans of putting a digital speedometer, cause I've been looking to get one but idk where to even start

[@BrandonStellmach]

That was actually something I was looking at. There are some universal options that usually plug into the OBD2 port. But if I find something that will work good, I will probably make a video about it!

[@pistolhammer]

Where can i find your trunk spoiler i have a 18 Corolla and want a similar one

[@BrandonStellmach]

Well the spoiler was a OEM style spoiler for the 10th gen corolla. It might work for the 11th gen, but I’m not that familiar with them!

[@Pallidus_Rider]

That rear sway bar is notoriously hard to get out - a 9th gen Corolla KZbinr in northwest had a video about that.

[@BrandonStellmach]

Yeah I could imagine. Luckily mine came out in about 10-15 minutes a piece, working then back and fourth! But I couldn’t imagine an older and more rusty car. They would probably be a nightmare to take out.

[@Pallidus_Rider]

@@BrandonStellmach- here is the 9th gen video ... kzbin.info/www/bejne/fqPCaYyjrpmZmNE

[@Rosaa007]

Bro your build is lowkey sick very underrated build

[@BrandonStellmach]

Thank you! 🙏

[@10thgenrolla]

Megan good stuff 🤝 got one on my rolla and so far it’s holding up amazing

[@BrandonStellmach]

I have always heard good things about Megan racing! And they are very cheap compared to all the other ones!

[@10thgenrolla]

@@BrandonStellmach yep you right

[@kidmanila2160]

They should of sent you not blue but a pink one pretty in pink

[@BrandonStellmach]

I ordered the pink one, but they sent me the blue one my mistake!

[@SgtsTanTaco]

I need a new bumper! Send me your sites where you shop!

[@BrandonStellmach]

Best place I use is eBay for parts. Unless you want OEM, Then I just recommend the Dealer!

[@traplordrigo1249]

Next mod has to be an interior recoding setup lol

[@BrandonStellmach]

👍 👍

[@dan-othemando7958]

I Can See Myself Doing This On My 2011 S Rolla. If I Still Had That Car!! Nice Build Can't Wait to see more of the Matrix!!

[@BrandonStellmach]

They were a great upgrade! But more on the matrix is coming! Just need to get some time to work on it! Having some big problems with my corolla now!

[@azedits16]

A sway bar, also known as a stabilizer bar or anti-roll bar, is a component in a vehicle's suspension system. It connects the left and right wheels to reduce body roll during cornering, helping to keep the vehicle stable and improve handling.

[@BrandonStellmach]

That is good information on how these work, and what they are for!

[@kidlo2050]

You weren't lying when you said you were getting new sway bars.😂 That blow off valve sound good.😎

[@BrandonStellmach]

Yeah I believe when you asked about it! I had already ordered them! And I’ve had the turbo in the corolla for about 6 months now! And every time I drive the car, The turbo noises still make me smile!

[@chxpo8776]

Hey bro I don’t know if you answered this but are you tuned with the turbo and how much are you making? Love the car by the way!

[@BrandonStellmach]

Yeah I am I a base turn right now, making somewhere between 230-250. Once I put a new clutch in, and button up a few other things I need. I plan on going to get a dyno tune!

[@benjaminrivas2831]

I'm really thinking to buy a Toyota Corolla 2012 s model and make a lot of modifications

[@BrandonStellmach]

They can be a fun car to modify and learn on! There is plenty of after market parts out there. Just need to do some research in finding them!

[@easton274]

Can you put a link for your shifter boot I needa a nice one and love that leather one you have.

[@BrandonStellmach]

Honestly it’s a a cheap shifter boot. It looks good from a far. But it’s cracking and peeing up. So I wouldn’t recommend it. It would just a universal one I got from eBay. I do need to find another one and replace it soon! But it’s actually hard to find nice quality ones!

[@hex881]

you inspire me to mod my 10th gen corolla thanks for all the ideas!

[@BrandonStellmach]

That’s awesome! Glad to have given you some ideas!

[@Misplaceddd]

Is tinting your rear and front lights a thing your trying to do it'll look really nice

[@BrandonStellmach]

Oh my OEM tail lights I did tint them, but since then I have upgraded to my Altis tail lights. I do plan to tint them soon! As for the headlights, I like the look of tinting them, but I don’t want it to make my head lights not shine as bright!

[@lahkrizen4756]

It’s such a beauty 😍

[@BrandonStellmach]

Thank you! 🙏

[@Meg7008]

🔥🔥🔥🔥🔥🔥🔥

[@BrandonStellmach]

👍 🔥 👍

[@noway57]

Nice

[@BrandonStellmach]

Thank you! 👍

[@randommf3549]

🔥

[@BrandonStellmach]

👍 👍