Turbo Starlet gearbox upgrade (Nicks Starlet)

[@920400706]

Still can't get over how ridiculously huge that turbo is boys, makes me chuckle every video when it comes into boost so hard

[@andrewrigg4905]

I got a C52 from a AE112 Corolla and the passenger side mount bolts straight up same as the original starlet box no mods required. The diff ratio went from the stock 3.7 to 4.3 . Was a decent change.

[@Kapil-Patel]

Long live Camp Dog 💪🏽 Love this channel!

[@budalcor20l85]

1 week away and no Gearbox haha- great video guys as usual!

[@Camp_Dogs]

🤣 Cheers mate!

[@razorbackss]

CAMP DOG, CAMP DOG!! Haha what a gripping episode 🤣

[@Camp_Dogs]

Thanks mate glad you enjoyed it 🙂

[@razorbackss]

@@Camp_Dogs always. Haha the little edits for effect are gold.👍

[@robertnewland90]

Great vid, especially at 10m 12s in the opposite lanes 😆

[@SkalabalaK6]

A great project will be to fit an E58 to a 4E. I bought an E151 with TRD LSD, going to swap the LSD into an E58 for my 4E :D

[@redchris97]

🤣 camp dog lives again!

[@Camp_Dogs]

camp dog forever

[@nicardomartin2055]

I had to carry mines to a machine shop to get it drill out and the tap that was a really pain when I found out the holds when already drilled

[@minivanin]

It be great if you can show what is involved with switching the bell. I have an old swapped c52 (aquired the trans already done) behind my turbo 5e thats essentially has a million miles and all abuse. I know one day I will break it and would love to know how to put together one.

[@Camp_Dogs]

Look for a channel called armstrong family. Hes the c52 god.

[@clowe19652011]

We blew a ring on our stock endurance 4efte and broke the shifter in the backup driveline 3e-e. Wish it was closer to the power levels yall were pushing. Breaking it at stock/near stock is just sad.

[@Camp_Dogs]

Still awesome

[@tyreserari4323]

Can you find a 2e engine make it fuel injection and make more power with a turbo installation... do whatever modification you can but the block and the heard stays the same... 🤷‍♂️?

[@Camp_Dogs]

None in Australia. Send us all the parts and we will do it

[@boostedmechanics]

Nice asf

[@ВованДедогрюк]

Hello. I am also currently assembling a turbo from the 4efe engine. I really liked the location of the turbine on your engines. Question. What about the power steering pump? I think that everything is correct, I write through a translator.

[@Camp_Dogs]

Hi we did not use powersteering on this car. If you would like to run powersteering, i recommend to use the standard power steering rack, but use an electronic power steering pump from old mercedes or any car that has one. The electronic pump can be mounted in the boot of the car and the hydraulic lines go to the steering rack. Works great

[@ВованДедогрюк]

Спасибо

[@Ricerguy]

the plate between the engine and gearbox should have an alignment dowel along with the single 10mm bolt though.

[@Camp_Dogs]

Did you watch the video? 😂

[@Ricerguy]

@@Camp_Dogs of course. I saw the part where you shook it and it moved, and you both confirmed it was bolted in, i was just mentioning that i also recall it having a dowel as-well? i honestly cant remember i have not seen my plate in years. a small dowel behind the flywheel where you put it over then catch and send the bolt up....i also binge watched these eps last night up until 5am, so i could have missed something. xD

[@HowToTurbo]

Oi thats sick aye

[@Ricerguy]

ah, since going to the c52 boxes you guys didnt mention the LSD situation. did you swap the phantom into the c52 box or were they already lsd?

[@benburke4077]

Any dramas with drilling the holes for the mount? I'm putting a C52 corolla box in my Glanza and need to swap the bell housing and drill the holes, but notice the c150 has cut outs where the mount bolts to along those casting sections. Mines was originally an Auto

[@Camp_Dogs]

Auto and manual mounts are different. Not interchangeable

[@benburke4077]

@@Camp_Dogs yeah I know. I've done a manual conversion and have a c150 in it now. Just wondering about the offset difference where the mount is between the starlet and Corolla boxes

[@kurtarcher2113]

Need fresh stocks of parts 😂

[@djfrankieflowers]

Do you have a ep82 gearbox workshop manual link? I bought a C56 non LSD and need to strip it down to replace the tranny with a KAAZ LSD.

[@Camp_Dogs]

Watch my video on “how to lsd your gearbox for $35

[@afterfive1620]

When do we get the camp dog merch??

[@Camp_Dogs]

Had a few people asking. We are working on a few basic designs and will see how they go. Thanks for asking !!

[@afterfive1620]

camp dog, camp dog, camp dog!!!

[@crazestewart2348]

hey mate can this gearbox bolt straight into a gt? looking for a manual box on a budget. currently has a auto. cheers

[@Camp_Dogs]

Yeah mate they are a stock gt c52 box…. If you get one from an A series engine you will need to swap the bell housing and you will be good to go!

[@crazestewart2348]

@@Camp_Dogs that is what i like to hear! would you know how to wire one up to a auto loom?

[@OperatingPear80]

CAMP DOG CAMP DOG CAMP DOG!

[@Camp_Dogs]

Together we pray 🤣

[@joseph8852]

Camp dog OOOOOOOH HA HA !

[@Bradp72]

told you so!

[@Camp_Dogs]

Nah wasn't a gear break. Watch the next video

[@Bradp72]

@@Camp_Dogs shift fork bolts are the biggest issue when slam shifting.... i can send you pics of what i have done to fix the problem if you like

[@gemini3558]

😜👍🇦🇺

[@joshuawood2147]

camp dog! camp dog! camp dog!

[@andrew1977au]

🤣😂

[@Camp_Dogs]

Hey dad

[@tayshincampbell3995]

That’s gonna demolish the gt When’s dyno day

[@Camp_Dogs]

Hopefully soon!