That's some good stuff. ..I can't wait until you get your own shop and dyno....you show how to truly make a motorcycle fast...these other " builders/tuners" better WATCH OUT!!!!
@iloveslideking6 жыл бұрын
Every detail matters a lot.
@turbowarren22056 жыл бұрын
another great informative video , and the bike is looking awesome
@mrmete6 жыл бұрын
Bet you its gonna be faster than your busa, i kid i kid lol
@JayDonII6 жыл бұрын
All you have to do now is lose about 20+ pounds. . .wait. . .30+ pounds to take on Steve 5UP. LOL
@jonathanatkinson2515 Жыл бұрын
Dope video Evan…🕺🏾🕺🏾🕺🏾to the overly epic music
@mrmete6 жыл бұрын
That was EPIC...music that is lol. Goes to show though with everything being the same how much a just one tooth can do to acceleration, love the vids bruh as usual this is needed in our community
@EJR-Performance6 жыл бұрын
Youre gonna like the next video. Its not as fancy and more talking than anything else... but you will see.
@mrmete6 жыл бұрын
Will do, looking for to it
@MrGuerraTube6 жыл бұрын
Nice... wait 4 the next one
@MrGuerraTube6 жыл бұрын
I have been seeing your vídeos, mostly of the "bitch ninja"... and i would like to share some idea with you about the iap fuel maps calibration wich i have seen you really do it well ... i am from Portugal, maybe we can make a Bridge for your tunning... add me youtu.be/addme/0uUdd3_57DPxUAWi1m5peVyZwKGSEg
@alj14515 жыл бұрын
great work
@EmergencyMoto5 жыл бұрын
Hey so what is the advantage of the gpr stabilizer as opposed to the oem ohlins??? Is it just because you can’t adjust the oem since it’s adjusted by the Ecu and the gpr you can adjust on the fly as needed for your preference ?
@raceaddict32126 жыл бұрын
I need that soundtrack..
@EJR-Performance6 жыл бұрын
Dance with the dead - diabolic
@lamznguyenz43795 жыл бұрын
on revzilla the gpr stabilizer says it fits gen4 zx10s, i was wondering if those could fit on the gen5s? and where did you get your gpr at? thanks
@kingward16835 жыл бұрын
Lamz Nguyenz wondering the same I have 2018 zx10r
@OMAR-gl9cp4 жыл бұрын
Hey EJR nice video cool part just wondering what gear u going with the sprocket kits because I want to try -1 front and +2 in rear, what u think o my bike 2011 gxs-r1000 street riding only ?
@Rolo1973 жыл бұрын
Same setup...how do you like it?
@bitupandeka17193 жыл бұрын
Kawasaki the world class from India Kawa Lover
@AKUMARIDER4 жыл бұрын
like for the epic music!!!
@user-lv6uz1kw1c5 жыл бұрын
What to do when lifting the car? Request review
@MichaelStavropulos Жыл бұрын
Why does people replace the stock stabilizer with the GPR?
@albaniansk8er6 жыл бұрын
One quick question. I’m doing the same chain conversion however I’m using Renthal sprockets. Front sprocket has a bigger spacer on one side and it’s stamped with “17” and item number and center spot is higher then other side. I installed it with lower spacer side facing engine. Is that correct?
@TheJalopy806 жыл бұрын
I have a random question for you. What oil do you run in your bike. Why did you choose that oil?
@esaurdaddy69496 жыл бұрын
Nice
@alj14515 жыл бұрын
did you fold the lock over on the front sprocket..on the install.
@zxtitan58836 жыл бұрын
What was your total weight loss from d parts installed on this video. Go info from u on everything. FLORIDA AN KAWI ALL DAY ( MR.ROLL ON)
@W5rr2nG6 жыл бұрын
When dropping the front on the forks, what did you use? Just friction and gravity itself?
@EJR-Performance6 жыл бұрын
Yup
@W5rr2nG6 жыл бұрын
which bike did you order the gpr damper for since its not listed for gen 5?
@dariodipaola84455 жыл бұрын
@@W5rr2nG You can get GPR's for the gen5. It should be the same one used on the Gen4... could be wrong. Check out like Revzilla or something bro. They have GPR, Toby, K-Tech... all good brands.
@jelanimobley74205 жыл бұрын
Just want to know where you got the GPR steering stabilizer for the 2016 ZX10..or will they Gen 4 GPR stabilizer work on the Gen 5 also
@EJR-Performance5 жыл бұрын
No. You have to call gpr direct.
@sangetsuichigo79814 жыл бұрын
Did you lower the rear? How much did you lower the front? What are your measurement for rear and front just xame across to your video and want to lower my bike
@usaamahstreetrider2 жыл бұрын
2 lowering
@neigalcox14995 жыл бұрын
What app is that you’re using to track the pulls?
@dakotawentworth66764 жыл бұрын
@ejrperformance what rotors are those???
@dry5095 жыл бұрын
Newbie. What does the steering stabilizer do?
@simon07215 жыл бұрын
For the steering damper you can use this eliminator. www.healtech-electronics.com/wp-content/uploads/ASDE_Advanced_Steering_Damper_Eliminator.jpg
@rubendelrio61203 жыл бұрын
Where can i buy that rear brake disc ?
@neigalcox14995 жыл бұрын
Also is there an email I can contact you on I have some questions regarding tuning and flashing ECU?
@JayDonII6 жыл бұрын
I couldn't get my front forks lowered for shit on my 2016 ZX10R. I just want about 1 inch lower in front. I loosened everything and it didn't want to move. What didn't I do?
@dariodipaola84455 жыл бұрын
Did you remove the damper? and remove the clip-on bolts? And loosen the lower triple bolts?
@JayDonII5 жыл бұрын
No I didn't remove the damper because I'm only lowering it 1 inch or as much as I can with the stock damper. Lower and upper triple bolts were loose and clip-on bolts. Had the bike on a hoist supported by straps, then I put the bike on the ground and still couldn't get the forks to move much at all.
@jonnyboyrider6 жыл бұрын
Where did you get that rear brake disc from?
@dariodipaola84455 жыл бұрын
Superbike unlimited bro.
@djromana175 жыл бұрын
What's wrong with the ohlins tho??
@Goodluck-hd5gp4 жыл бұрын
It doesn’t work well at all the zx10r gets head shake with that ohline stock damper and it is a very un easy feeling don’t waste your time with that thing.