Turbo Your Car With Ebay Parts - This Is What To Look For

Check out my website
www.huntertune...
Need A Turbo?
Checkout www.turbo4less...
Hit me up for special pricing on any turbo you see :)
Follow me on social media
HunterTuned KZbin Facebook Group
/ huntertunedyoutube
Instagram : / huntertuned1
Snapchat : HunterTuned
Email : [e-mail]

[@BlaserBuilds]

The ohm reading, is a measurement of resistance through the circuit, which effects the current carrying capability of the circuit. An ECU made for high impedance won't be able to handle the load if a low impedance injector. Too much current (heat) flowing through the circuit. Too much resistance will effect the final power load going to the injector (power=Volts x Amps). The same concept used for a car audio amplifier. An amp may only be 4 ohm stable. If you run it at 1 ohm, you essentially have 4x more current flowing through the circuit which can hurt the amp. However, if you run it at 16ohms, you're getting 4x less power through the circuit. If the amp is rated for 1000 watts at 4ohms and it's running subwoofers rated for 1000 watts total, it's a good match. If you run that same 1000 watt subs wired at 16ohms, you may only get 200 watts out of the amp and the subs will not perform to their potential. If you see wide fluctuations in ohm reading between injectors, this could effect flow rate as the circuits are passing different amounts of power. Similar concept to why theres injector voltage offsets. If The total power(volts x amps) is lower, because resistance is higher, it will take slightly longer to pulse the required amount of fuel. The tune may be telling the injector to pulse a certain width at 13v, but it assumes the current through the coils are close. If one injector is seeing 16ohms, instead of 12, it could have a lazy pulse, or not have enough to open under higher pressure. This may also explain variation between flow rates from low to high rpm. Would be interesting to test.

[@kevinrtres]

Or to put it succinctly - to maximize power transfer the impedance needs to be matched - output impedance should match the input impedance. Basic circuit theory.

[@elfuertedr4513]

HELLO HELLO HELLO HAPPY NEW YEAR 2023

[@jonelmore4539]

Hey hey hey... ittttsssss goin to be a great year

[@frias2287]

Happy new year💪👍🤝💯

[@hsteele8]

Without you I'd never have turbocharged and tuned my own car. You're a hero.

[@kevinrtres]

Great video for DIY turbochargers! - Doing quality control for DIY installations - people should truly thank you.

[@bluegizmo1983]

My brother and I are ebay turbo'ing a car as well. It's a 2001 Kia Spectra 1.8L (basically a clone of a mazda BP engine with slight modifications). The engine was completely rebuilt with all oem spec parts basically, because nobody sells performance parts for this engine. The head was ported and massaged though, and the rings were gapped for boost. Dynoed it NA and it made 130 HP and 120 TQ to the wheels at 5000 feet elevation on a hot day where we live. First turbo we bought was just too big and wouldn't spool enough to even make 10 PSI by 6500 RPM. Now with the smaller ebay turbo its MUCH better. We replaced the factory injectors with 500cc injectors, upgraded the fuel pump, and replaced the factory ECU with a Speeduino ECU. Got it running great on 12 PSI so far, with plans to turn it up to around 18-20 PSI once we get it back on the dyno.

[@Barrios505]

Good info brotha! In the process of building a 98 Integra non Vtec. It’s been a fun build, can’t wait to slap her on the dyno.

[@braydongreen8357]

i think it’d be pretty cool if you did one of these build overview’s on your integra and some of your personal cars

[@matthewgaffney853]

I agree, I have a 2000 gsr and I was taking notes on this video, I would love an integra build just like this. My goal is to get close to double factory power, 300-350 hp. I just need a plan. Definitely will buy your injectors too BTW. I've got a B18B block in my garage, not sure if I should just build off my stock b18c1 I have in the car or use the b18b button and my vtec head. I don't know I need your help on my integra build bro. Would love to run pump gas. Great content. BEST HONDA STUFF IMO. Wish I was closer to you. Love from Canada 🇨🇦

[@jeremy-fe8gj]

How in the world did they get that first nut on the exhaust manifold at the 4:50 minute mark!? I'm seriously impressed

[@fwdB18Cej1]

Awesome information man, this also answers why I kept cracking blocks and ring lands at 16psi with my cast manifold. Definitely will be upgrading to a Ram horn!

[@civicpride1986]

Depends on turbo size and tune itself... i have ran 16psi on small t3 ebay turbos on stock motors and no problems.. B series that is. I wont run that on a stock d15.

[@mitchweber7868]

Fuckin old school eBay talk build love it man you're still the same guy you were 5 years ago!

[@kevinconaway4409]

I like that you don't bash the low dollar guys.you try to make the best out of lemons you make lemonade with a splash of jack

[@djviciousballz]

About the resistor box: I had DSM 450s for a while and I'm pretty sure I definitely burned up a capacitor in my p28, but not fully. So when I switched to high impedance, it worked for a while but the p28 finally took a shit. Also, I don't think any 96 and up had a resistor box from factory, but don't quote me. I always heard you can get them from CRXs tho. So I think low impedance was a pre obd2 thing...

[@mastercricket7626]

This is how I started my build e Bay the world lol then found the flawed parts and replaced them with good stuff and the cheap stuff found its spot lol .. peace n love fam keep it rad stay safe and build on .. ps happy new year yal

[@iancarmona3133]

That's my lil go-to setup..

[@mobilebeeler]

I also noticed one of those stupid paper gaskets on the dump pipe. Which we all know will blow out on the first start up

[@Wreckedekcoupe]

I had those style injector clip adapters. Instead of them clipping together it pushed the wires out the clip. Caused 1 cylinder to run lean, it threw a rod cause it detonated so bad it seized the piston in the bore. I will never used those adapters again.

[@jasonhuber3236]

Roxie's bark sounds like tires chirping lol Damn, all that work to install a turbo kit where you could run AC only not to have AC. Anyway, happy new year!

[@AdinSLaboy]

Happy new year 👋 very good inf buddy u always provide the true off ebay 😀 not to said it's bad but it its couple stuff the has to be modified so you just said it the one the you sale it's the best budget way my friend buy you stuff and his car its working very well 💪

[@mihailpetrovici5044]

You could just flip around or/and turn the test pipe so you get that bung in a normal position for the o2 sensor

[@JDMreck]

Sunday Afternoon Learning watching you videos

[@---fk1ct]

Great video. This could genuinely help so many amateur wrenchers trying to do this stuff.

[@ericg1149]

Thanks for the info, looking forward to more tips and tricks

[@undrgroundperformance]

Youre good bro. I understand gotta be with the fam in these especial times. And lets gooo. Gonna start writing this down

[@CarSick813]

I have videos on my channel doing this same thing! All eBay turbo kit I made 339 whp at 11 psi stock b20 bottom b16 head

[@Brock_Landers]

Bro, I made 412 whp with that exact eBay kit...lmao Sorry, it was a B18B1 with head studs, BC cams, dual valve springs with titanium retainers, S2 Ultra intake manifold, S2 70mm throttle body, and a fresh stock rebuild.

[@carnstar]

How long it last??

[@civicpride1986]

Probably made that around 20psi on e85 or pump gas 93.

[@tylerMRDX]

I️ need a friend with honda knowledge like this😂😂 I’m getting into my first build, b18c turbo set up. Where you located?

[@notone4029]

Hunter, Thanks VERY much for giving US viewers EXTREMELY valuable information on the RIGHT parts to have that work for the Dyno . So time and money is NOT wasted. Any thoughts on K tuned 4 bar MAP sensors?? What I bought for my boosted K build. Any info APPRECIATED.

[@skitzofilth]

Your the man hunter. I divkits like all the time ty addressing all the issues ive already been dealing. With. Ty for real I’m the details

[@TURBOTRISTO]

I did several videos on this on my channel

[@joshfrombkln]

love ur vids... Happy 2023!!!!

[@oksblue]

Sounds like turbo k series Manifold coming soon

[@jsimmons3090]

Good video! Can't beat some turbo Honda content! Thanks for the information! Keep pushing!!

[@carnstar]

Glad for this video! Loved it I have a del sol b18b like in this video and I was thinking of boosting and seeing some ebay turbo kits on offerup for like 400 bucks I’ve been tempted but I’m just going to swap my h23a vtec over and then decide to boost

[@98ek9]

Obd 1 Integra gsr stock turbod b18c1 I've got as far as trying to set up hondata. I just can't get the injectors set right. Injectors are FIC (fuel injector connection) 750's. If the headlights are on or any other power draw, the afr goes to shit and makes it undriveable. It's been sitting for 3 years cause of this. There are no tuners in my area that aren't 3.5 hrs away. I've put 13.5k into the car over the years and just feel defeated. In Canada, btw

[@undrgroundperformance]

Bro if Pfi Speed buys your things. Im gonna buy them toooo

[@jaredscott3613]

Love this, this is exactly what I plan on doing, looking forward to the dyno see what it makes

[@civicpride1986]

10psi about 258whp or so

[@longrodlseries]

This brings me back to the DRAG turbo kit days. Even though Ebay it is kind of cool to see people can just buy a kit and install on their own with no wait times. Good info on the flaws of the kits as it is what I've seen even in the past with the DRAG kits which a lot of these ebay kits copied. One thing would be good to see is if the intercooler pipes have a lip on them to prevent them from blowing off. Also before we used to use the boost dependant fuel regulators with a MAP sensor bypass and for higher boost/power we would use bigger injectors like a 310CC and up and a AFC. Now there is Hondata. Would you share your thoughts on the two in a vid?

[@89hybrid88]

So higher resistance equals less current. Which is less amperage being applied to the injector. In affect equals less power to each injector.

[@mobilebeeler]

Great video tho dude killing it. Love that loose rear control arm bolt btw. Def what u need to go straight 😑

[@mrcurtis3714]

Your a Sales Men today eh bud. I have to Buy a turbo from you now.

[@nushoualee1841]

yes all the ebay downpipe never fit right and u have to custom it to fit right

[@pilotohernandez1569]

I use the same boost controller and I use a plastic T like u say and it not was working so I connect the eBay T and it have a ball with spring inside and it did work good so don't recommend the plastic T with eBay controller

[@s.a.i.v]

Don't forget Busters paperclip and string high boost controller

[@Blake_Drago]

Happy new year buddy

[@ChildrenOfDesire]

Great video, keen to see the tuning process on this car

[@garrisonroberts1297]

Great info, much appreciated

[@gracetestifies]

Great video. 👍 I always learn watching 👀 😌 you...

[@SloppyMechanics]

Here

[@jimhiscott2918]

Shameful Hunter Tuned injector plug....lol😅🤣😂 Inam totaly kidding. Your matched injectors are awsome. I have heard nothing but good things about your injectors. As for Roxy you could makeca entire video of her and i would watch it. I dog rescue and adore dogs❤

[@BlaserBuilds]

Good vid! 👍

[@jmillzthepimp27]

How do I learn your ways Honda Yoda lol I would like to download your Honda input into my CPU man lolol

[@d.bray1]

Great video!

[@JarrodWillemse]

Did anyone else see that manifold nut on backwards haha

[@drsvenoo]

lol have they put the left under manifold bolt/nut upsidedown how can you make things harder

[@brendankeeling2741]

Love your videos bro, thanks!

[@boosted268]

Loving the dog 😆

[@jbrayda9]

Keep kickin ass hunter 🤙

[@StudlyDyl]

Know anyone wanting a fresh b18c with nippon turbo pistons and skunk2 rods? Can’t continue the build.

[@Skatingdragon7]

5:04 the exhaust mani bolt is backwards 🤨

[@wscap4576]

🤣Roxy's like stop talking about that ebay shit tell em about our great stuff. 🤣🤣🤣 gota luv roxy

[@ExtraFungus]

"No restrictor, 3an oil line". That probably is going to save me the most money out of anything else in this video.

[@camjt19]

Is that manifold stud nut on backwards? 😂

[@kkkevv224]

informative thanks ht

[@bigfoot355]

Watching

[@nicholashays1246]

Ebay power baby

[@TFBburban]

full ebay setup but what tuning software? i see these poeple say 500 kits but no one ever discusses tuning them

[@HunterTuned]

This one has a chipped ecu from HA Motorsports

[@ClumsyCars]

im running 20 psi on an ebay log, it falls off after 7000 rpm

[@frias2287]

🔥🔥🔥

[@H22a4accord]

Hey hunter. Do you know a remote tuner that would help me get a base map to break in a fully built h22 turbocharged on e85. It has 2200cc injectors,golden eagle intake manifold and skunk throttle body. It’s having issues surging at idle and cruising around neighborhood in 1st gear. I just fired it up 1st time today and don’t know a thing about how to use the hondata and the tables and changing things on it lol any suggestions or advice would be greatly appreciated

[@Blake_Drago]

eBay Turbo Kit Roast Video 😂

[@Ifixstuf]

Would you ever turbo a 4afe locally?

[@lsxtmt4910]

That dog needs an anxiety dog

[@josh5425]

Is that a nut on backwards on the exhaust manifold

[@HunterTuned]

Good eye lol

[@BuyingTickets]

Yeeeeeeee

[@mrcaffein]

Not a fan of the cheap ebay stuff (except for certain parts that are bulletproof/probably made in the same factory in china anyway like the intercooler piping etc.). Spent too much $$ building my engine to ruin it with some cheap ebay boost controller. To each their own though. Which Packer game did you go to? If it was the Vikings game we just had, I'm jealous. Also check out my latest video on my channel, just got the Darton sleeved engine running and took it for a short drive before I take it out to tune it next Spring.

[@HunterTuned]

Vikings game was a blast!

[@mrcaffein]

@@HunterTuned Damn that's lucky lol, hope we bring that same energy this weekend against Detroit. Keep up the vids man, always fun to watch.

[@drfeeluponyou5342]

any recommendations where to buy those 3n turbo oil lines from?

[@HunterTuned]

eBay,Amazon

[@drfeeluponyou5342]

@@HunterTuned thank you man I’m trying to build my sleeved D16y8. Love your content man keeps dropping videos

[@notone4029]

Hunter, could you please give me your thoughts as a Dyno tuner on K tuned 4 bar map sensors? Already purchased one for my build to stockpile for turbo. Thanks in advance

[@HunterTuned]

You should be fine

[@notone4029]

Thankyou

[@kevinjohnson1958]

1528th from the UK.

[@HunterTuned]

I think that’s the highest number you posted in a comment.

[@kevinjohnson1958]

I know, I was in bed asleep.

[@LynnTwinCustoms513]

I made it to the end! I also like my nipples capped and snug like a bug haha

[@TheProchargedmopar]

👍💪

[@cbdreamer1709]

It’s funny. It’s like he never heard of you before he built the car. Coulda helped to consult turbo professional first