How to Install ANSYS 2024 R2 Professional version | Step by step guide

[@yadixserrano3274]

Once the steps are done, when I open the workbench, all the tools do not appear. An example is static structural. Do you know why I have this error?

[@Imran_Hussain1]

When i run ICEM CFD 2024 R2 error message is displayed: Invalid (inconsistent) licence error The licence key and data for the feature do not match. This usually happens when a licence file has been altered. Feature: cfd_preppost Licence path: 1055@localhost FlexNet Licensing error: -8,544 What should i do

[@SahilKhan-kb7gi]

Same problem bro have you found the solution please tell 🙏🏻

[@yuutsu4232]

15:10 when I try to save here, I get "Could not set flexNet servers" error, do you know what could be wrong?

[@yuutsu4232]

I fixed it, I just had to run the app as the admin

[@zakkiwaki2053]

Im so thankful bro ❤​@@yuutsu4232

[@Homero1121]

@@yuutsu4232 Thank You! Very Helpful!!! Do a right click on the "Ansys Licensing Settings 2024 R2" Icon, then go to "More", and Click on "Run as Administrator."

[@shrill_kill9929]

edit: close the Licensing Settings window and reopen it as Administrator.

[@alpha777omega]

Thank you very much brother.

[@minhnguyenquoc5821]

I meet -8,544 error, can you help me fix it.

[@berkayerdogan2701]

yapılmıyor a hpc priority hata veriyo

[@Mhm-l7l]

When I save as or copy lesince file to programe files/ Ansys inc it is not save cause I not administrator How I can do that

[@surajgurung4640]

I got the same problem

[@jig577]

Copy it as ctrl c and paste it manually there

[@buiminh2217]

hmm, my graphics tab is not showing, how to fix bro

[@chinmoysgroove8851]

Licensing interconnect and Licensing interconnect monitor are running but Flexnet licencing is not running in the licence management center. What should i do? I have followed your every steps accordingly though. 8:10

[@CFD_Mechanic]

stop and restart again

[@shahnawazmohammed9482]

I downloaded the file. But i am not getting the SolidSQUAD folder in which the ansys. inc and shared files is there. Any reason why this is happening ?

[@CFD_Mechanic]

due to antivirus

[@evangelutionx9345]

Tell me, please, what should I do? In the ''Ansys Licensing Settings 2024 R2'' application, a red notification appears in ''HPC priority'' Failed to run: D:ANSYS.2024.R2.Products.Win64-SSQANSYS Incv242licensingclientwinx64ansysli_util.exe .

[@marcoc9143]

I have the same problem. Have you found a solution?

[@matheusmonteiro7391]

Same here

[@matheusmonteiro7391]

I replaced the file "shared files" for the one in the package, and it is now working.

[@nofalnaveed2754]

@@matheusmonteiro7391 Can you please share details, I have replaced folder but its not working. Please guide

[@manikrish4313]

The first time I installed it according to the instructions, it worked properly, but when I connected to the internet, the license issue arose. It is showing "The mechanical editor doesn't have a valid license." I removed all files from the installation directory and then reinstalled. It was operating again, but again the license issue arose after a few minutes. Is there a remedy for this?

[@CFD_Mechanic]

you have to put the your ansys and software folder in exclulsions in antivirus software.

[@manikrish4313]

​@@CFD_Mechanic As you said, I excluded the folders, but the problem persists. I made over three attempts to install. It functions properly for the first ten minutes, after that this license issue appears. It's actually my brand-new laptop. Do I need to take into account any other aspects while following this installation procedure? Please help me to fix this.!

​@@manikrish4313 did you fix the problem ?

[@Riyal_18]

everything is working but icem and fluent shows license error

[@CFD_Mechanic]

if fluent and icem shows licensing error, it means license is not installed properly

[@Riyal_18]

@@CFD_Mechanic but workbench is running i followed everystep properly

[@Riyal_18]

@@CFD_Mechanic Can you provide link to download 2024r2 version please

[@hadiyasin3336]

when i open the apps after installation it shows red for the license what can i do in this situation i did what you did exactly step by step.

[@CFD_Mechanic]

check ansys license management center

[@hadiyasin3336]

it says in the licensing settings (HPC Periority) Failed to run: C:\Program Files\ANSYS Inc\v242\licensingclient\winx64\ansysli_util.exe, although I copied and pasted as you showed, what could be the problem.

[@CFD_Mechanic]

@@hadiyasin3336 install it again

[@xaisah]

​@@hadiyasin3336 i've got the same problem. have you already figure it out?

[@수빈김-f8o]

It's a crack program, should I turn on the internet and use it?

[@KirtiVKarma]

Can you please provide the link from where you have downloaded this professional software for which tutorial has been shown?

[@CFD_Mechanic]

As per KZbin policy I cannot share it here. But you can search on google and find it easily.

[@KlavierSynth]

On HPC priority it says: Failed to run: C:\Program Files\ANSYS Inc\v242\licensingclient\winx64\ansysli_util.exe

[@marcoc9143]

I have the same problem. Have you found a solution?

[@KlavierSynth]

@@marcoc9143 yes, reinstalled following .txt instructions instead video. Worked for me!

[@antomyth5413]

Is it ok that ansys license manager is stopping soon after starting?

[@CFD_Mechanic]

start it again

[@antomyth5413]

@@CFD_Mechanic I did, but it always stops

[@prasananv8280]

Please replace the shared files from setup file in the following path - c drive/program files/Ansys inc. then start the licence manager. It's working. Please try it guys😊

[@ahmedmohamed5443]

Can you help me to install by a Zoom meeting or teamviewer?

[@CFD_Mechanic]

can be done on consultancy rates

[@SuperMorokot]

Please do tutorial how to install Autodesk cfd.

[@trungkienao6241]

thanks you