Coleman RB200 Swing Arm build PART 3

For more information about builds and services visit www.metalfabcr...
If you need parts for your builds then visit www.ombwarehou...
Thanks for Watching

[@dt9094]

That’s it, it’s perfect. That’s what they need to do. Great videos🇨🇦

[@SpaceCruizer]

that thang Lookin sTURrrrdy man good clean build

[@turbolaser24]

Thanks! I'm happy with how it turned out. I have another one coming sometime from Coleman to build as my race bike

[@Unknown-er3pu]

Nice idea and work

[@thenexthobby]

RB200 owner here. Nice mod! If Coleman does accept this design, I hope they go "all the way" and also incorporate the front disk and TAV missing from the Monster Moto B212 design this was otherwise bought from. At speed, the rear disk pads suffer heat float in only about 50ft. It really needs the front brake also ... even if you buy B212 front wheel/disk/caliper/hydraulics the left front FORK with the mounting boss for the caliper is no longer available. The shame of it that is ALL of that would just bolt right onto the RB200 if it were available. If I were buying one today I'd snag GoPowerSports' closeout B212 rollers for $600 unless you can find a used complete RB200 or the Reatree RT200 version for less and give up the front brake (a TAV30 can be adapted to these bikes without much effort and without needing the B212's unique jackshaft frame pieces.) It would not be a cheap bike, but it would still be much nicer looking than the gangly and awkward Trailmaster MB200. These are very stable at speed (on-road, but the stock tires squirm.) It lacks proper ground clearance for off-road but yes the frame is stout, despite the ugly welds Coleman inflicts on it. My only concern is that a header would need to be available from aftermarket, probably running close to the outside frame on the left side but not so as to burn you or the seat?? One-inch diameter would be enough for most uses. The typical pass-through type used on these frames would never clear that rear coilover otherwise.

[@Deucealive75]

Have you seen these? Not bad at this price. www.tractorsupply.com/tsc/product/massimo-mb200s-mini-bike-blue-y180200317

[@anythingengines17]

Your back let’s go

[@turbolaser24]

Yeah I am! We have some awesome content coming.

[@justinmishler]

Do you know when they are dropping them and do you possibly see a 301 fitting as well I just picked up the Colman BT200 and I had plans of chopping the frame to make it look like that but if there dropping them soon I’ll probably give my first one to my lil bro as a gift

[@miguelpagansr6128]

That’s looking sick so far, plan on leaving it in stock form or heavily modifying it?

[@turbolaser24]

I'm sending this one back to ombwarehouse to get some final touches and then it will be going to SEMA to get feedback and probably mass produced by colemanpowersports. I'm working on getting coleman to send me one to build for myself though and it will get more work done to it.

[@miguelpagansr6128]

@@turbolaser24 good luck with it, hope you put out a video at the show.

[@chrisjaskolski2232]

What are the specs on the shock? What length? How's it ride?

[@MrThegabbster]

Your shop looks bigger

[@turbolaser24]

Yes sir I have a larger shop and yard to make some race tracks for action videos as well.

[@MrThegabbster]

Is that going to be a weld on kit. Brother

[@turbolaser24]

I definitely plan on a weld on kit for thw frame. This one is going to to get sent back to colemanpowersports to get mass produced eventually

[@geoffhunt9656]

Are thay available yet to weld on