Turbomachinery geometry handling in Blade Editor (1/2)

[@tarkanow1]

Hello, i have a question, did you draw the inlet, outlet hub,shroud sketches or did you project them from the 3D? if so, what is the command for project 3d into a plane?

[@johnk9621]

Hello! I was wondering if there is a way to validate stresses from structural analysis of a turbine blade..

[@haveanicetime]

I have a license problem when I import geometry from modellar to turbogrid...what should I do?

[@CFD_Mechanic]

change licese prefernces in workbench

[@haveanicetime]

Advanced Engineering Solutions what is the steps please?...I have found that it is set to "1"..use...!

[@hassanmohamed-tn1dc]

i have done all steps but i got an error when defining the shroud tip the error is : V value outside its bounds value=-5.37666e-005 how i can solve it please?

[@peterr.4185]

Hey there, i dont get the step between 6:01min and 6:02min. Could you maybe explain the step how you do the sketches? best wishes peter

[@peterr.4185]

+Peter Raue And can u maybe give me that iges data as well?

[@CFD_Mechanic]

+Peter Raue you can write me at [e-mail]

[@TheMongooseOfDoom]

Did you get a reply? What happens at that point?

[@CFD_Mechanic]

lets have one online session for free

[@CFD_Mechanic]

or you can contact us at [e-mail]

[@ardmunna]

Hi, I want to design the turbine blade profile in 2D and simulate the flow over it. Is there a tutorial on how to create such geometry. As I'm able to use bladegen to create 3D blade but I need only in 2D.

[@CFD_Mechanic]

see our airfoil tutorial. there will slight modification in setup for fluent, with getting geometry and mesh is exactly same....

[@mohammedsagban3667]

Do you have tutorial about BladeGen workbench?

[@haveanicetime]

How can I make the flow path?

[@CFD_Mechanic]

there is command to make flow path. right in the blade editor menu

[@haveanicetime]

What is the part that is under the blade?

[@CFD_Mechanic]

Have a nice time! that is hub

[@Viraj318]

Your videos has always been very helpful to me. Can you please show how did you make this geometry? is there any calculation behind this blade design?

[@CFD_Mechanic]

i did not make this geometry. I got this one from my friend

[@sinamaddah5574]

you can get the CAD file of NASA 37 rotor from different websites

[@TheJetman87]

hello. Can you explain me about blade editor. How did you apply blade editor into the designmodeler? do you have special license?. thanks.

[@CFD_Mechanic]

You need to change license setting in workbench. There are two licenses : once for design modeller and second for blade editor / blade modeller. Just change the order of blade editor preference to number one and an additional tool-bar will be enabled in your design modeller. You can also reach me at [e-mail] or through skype at turboenginner

[@TheJetman87]

Ok. Thank you very much!

[@ML-jo4po]

in which direction is the plane "mymer"? I can't understand. Thanks!

[@CFD_Mechanic]

please write at [e-mail] for more details

[@IamTheJRJ]

how do we do for twisted blades?

[@CFD_Mechanic]

same method

[@tranbaongoc1799]

SIr, How can I add the Blade Editor toolbar into general bar in DM?

[@CFD_Mechanic]

from tools > license and move blade modeler up .

[@dandeprop]

There doesn't seem to be any sound in either Part 1 or Part 2 of this video. Can we get some sound? It would make the video much more useful!

[@CFD_Mechanic]

+Dave Mohr i will try

[@hamaidiabdelmadjid2152]

hi i need to now haw to do a simulation of stage turbine 2-d in ansys fluent , sam help please!

[@CFD_Mechanic]

it is very simple. Cut 2d section of turbine and mesh it. And solve it.

[@hassanelkady4362]

i get this error when transfer data to Turbogrid , how can i fix it Application Error in TurboGrid: ERROR Curve is empty

[@CFD_Mechanic]

modify the hub and shroud curve location.

[@dandeprop]

This is great looking stuff, but there is no sound. Am I missing something? Thank you in advance.

[@CFD_Mechanic]

you are absolutely right. Our new videos are coming with sounds and more graphics.

[@CFD_Mechanic]

We also provide one-to-one tutoring.

[@rafaeldavid2711]

Is it possible to use this method to mesh guide vanes of a Francis turbine?

[@CFD_Mechanic]

yes

[@rafaeldavid2711]

​@@CFD_Mechanic Can you explain how can i do it? I am trying to mesh guide vanes using this method but i always get an error because of the orientation of my sketch, that need to be in a certain orientation because Ansys assumes that i want to mesh blades from an axial turbine. I tried to especify diferents machine type when i will generate the flow path but i keep constatly getting the same error.

[@altanyucel2818]

could you share cad data or similar cad data ?

[@CFD_Mechanic]

Yes, I care share it. Sorry for late reply, but we do not have KZbin access in Pakistan. I am using some methods to come to KZbin occasionally, though i receive email alerts whenever some comment is posted on my channel.

[@divyaprakash13310052]

turbo engineer Can you please send it to me as well. email id: [e-mail]

[@hwajeongjeon6238]

Thanks verry much!

[@CFD_Mechanic]

you are welcome

[@Missworld-7]

Thought h showing how to design step by step gas turbine blade 😭😭😭😭😭