Turn Any Photo Into A 3D Printable Statue In Minutes With Bambu Lab!

[@TheEdgeofTech]

Link to Makerlab - search.app?link=https%3A%2F%2Fmakerworld.com%2Fen%2Fmakerlab&Csh%2Fx%2Fgs%2Fm2%2F4

[@bloodyfinger5]

Thank you for your "how to" videos , it's a breath of fresh air vs so many other channels just doing "review" videos .

[@TheEdgeofTech]

Thanks for watching! I appreciate your support.

[@JoshuaMilrad]

So this is pretty amazing! Overnight I printed busts of my grandfather, wife, and mother with incredible results. But I used a resin printer of a different brand. How do I get more credits to keep printing??? A++

[@TheEdgeofTech]

@@JoshuaMilrad wow that's amazing! It's so awesome to be able to use a tool like this to recreate memories! You can get more points by going to maker world and filling out your maker profile. I believe you can get points by reviewing models and stuff like that as well. I'm still trying to figure out all the nuances of getting points lol

[@JoshuaMilrad]

@@TheEdgeofTech Thanks! Yes, I've got some extra points by filling out my profile but would really like to purchase more. OR is there an alternative tool to this? Hmmmmm.

[@carolynwaite-tomlinson8614]

Will this work with an animal like a dog or a cat?

[@lifeandloveabundance]

How long does it take to print this head? How much material cost for this particular head (estimate) ..

[@Anna-wo8fd]

Does it work with everything? Like if i put a photo of my cat's face it should work right?

[@robinstanfield1699]

I have a picture of a deer mount how would I make a small one of those and in color

[@IslandDigital]

How long does it take to print. Thanks !

[@fernwehmind]

Woah, I'm a Professional 3D Modeler and this is freaking awesome and frightening at the same time! :D

[@TheEdgeofTech]

@@fernwehmind Right! It's crazy! 😲 Thank you for watching!

[@JohnVella1968]

This looks really cool. Could I print these using a resin printer? I've got one, but haven't used it yet, so I'm still a noob!

[@hanswurstusbrachialus5213]

Do it.. Hes just a Bambu Fanboy. Its cool what they share - but it already exists elsewhere. Bambu is like Apple. You can generate it and use it for any printer.

[@JoshuaMilrad]

I did 3 busts last night on a resin printer. Great results! I had to add the supports and angle the model 45 degrees. That's really about it.

[@robinstanfield1699]

I have a bamboo lab A1 and a AMS

[@deanlegg418-u2k]

So how do you get the credits?

[@Versatil-1980]

*Mil gracias amigo!...* 😍

[@eddowney1364]

That is so cool will it do animals

[@dougbas3980]

Thank you

[@moodberry]

I'm considering a Bambu Labs printer. But what are the real differences between them? I am thinking I want one that does color. Opinions?

[@skyrider4789]

Dude, there are SO many video and textual reviews out there to answer your questions and more. Search!

[@TheEdgeofTech]

If you are looking to print high temp or more sensitive materials, get one that is enclosed like the p1s or x1c. X1c. If you are looking to just print pla, TPU, petg etc, grab an A1!

[@louyuno]

Omg... the german audio track is just... scary.

[@TheEdgeofTech]

@@louyuno How did you hear it? Did you choose German?

[@louyuno]

@@TheEdgeofTech No, it came up automatically and sounded like an evil AI trying to take over the world. I couldn't stand it longer than a minute and had to switch to the original audio. It's "technically correct" german but it sounds too creepy for comfort.

[@askrosm]

Same for french, just ugly

[@SwissplWatches]

Amazing feature and fantastic video. Thank you.

[@TheEdgeofTech]

Thanks for watching!

[@robertg3921]

I want to buy a 3d printer I think understand the proces a little But what does slicing mean is this a automated proces or what ?

[@TheEdgeofTech]

@@robertg3921 slicing is the term that's used for taking a 3d model and changing it into instructions that the printer understands to make the model.

[@TheEdgeofTech]

@@robertg3921 I just released this video about a quick overview of slicing. kzbin.info/www/bejne/bYemcpqkrJeYe6ssi=Uyx2r3nistHo1R73

[@robertg3921]

@@TheEdgeofTech wow thanks for your quick reaction Great channel btw

[@TheEdgeofTech]

@robertg3921 No problem! Happy New Year!

[@robertg3921]

@@TheEdgeofTech Happy new year Wishing you a year of health, wealth, and endless opportunities.

[@giulianostefani4022]

Oggi mi sono iscritto al tuo canale, COMPLIMENTI

[@TheEdgeofTech]

Thank you!

[@gothmaniow]

Do you need the bamboo slicer or printer to use this ??

[@TheEdgeofTech]

I don't think so. It would work in Orca slicer, ect!

[@Ale_giro]

Only a sub in their webpage

[@jimpalmer1944]

I am very new to this. I have a Bambu X1C on order. Will it be possible to take a photo of one of my grandchildren and create a statue?

[@TheEdgeofTech]

Hi! Congratulations on the new printer!! Yes, if you had a good straight on shot it can be anyone!! Thanks for watching!

[@christosvolikakis1523]

did you get your printer? I ordered mine during black Friday and have been printing for 3 weeks or less. I couldnt wait to try this for christmas and surprised how much of it was done for me. I suggest using PLA as it's most forgiving. I made the mistake of trying to print in ABS with a less friendly printer a few years ago and gave up until I came across BAmbu Lab's special. Hope it turned out!

[@jimpalmer1944]

@@christosvolikakis1523 Yes I did and I have created statues for each one. Got better on each. Really cool. Thanks for your help.

[@jp.girardi]

Any open source or easy site/app to do this?

[@TheEdgeofTech]

I'm not sure that there is another site that does this. I have not explored that option.

[@erimeljc5013]

bonjour , tout çà est bien mais comme toujours nous ne savons pas clairement comment obtenir des crédits 🤔🤔

[@MrBuzzyben]

i uploaded a photo of my dog. i does not work.

[@TheEdgeofTech]

Interesting. Was the picture clear and straight on? What kind of dog?

[@MrBuzzyben]

@@TheEdgeofTech the dog is a white poodle, I cropped the photo to take out most of the background.

[@RC-Flight]

Link in the description area won’t work for me, just get an error message saying no such link.

[@oli4572]

Funny you... Why talking to an AI Hologram? Links working...

[@RC-Flight]

@@oli4572 nope I’m not talking about the link in the comment section I’m talking about the link in the description section.

[@oli4572]

@@RC-Flight Am I talking to an AI Hologram? The links do work, also in the video description.

[@erikmatz3072]

​@@oli4572Links work, but audio does not.

[@TheEdgeofTech]

I'll check the link In a few minutes.

[@barryjones-c9j]

you forgot to put the link

[@TheEdgeofTech]

@@barryjones-c9j Woah! 😨 Thank you!

[@TheEdgeofTech]

@@barryjones-c9j search.app?link=https%3A%2F%2Fmakerworld.com%2Fen%2Fmakerlab&Csh%2Fx%2Fgs%2Fm2%2F4

[@DeFrisselle]

I wish you would have used a vastly lesser known photo of an indiviual Too easy to just have the software pull a model as there are many of Lincoln Can it do animals or objects

[@TheEdgeofTech]

I totally understand. I would jump on and check it out if you can! It's pretty cool!

[@mrmechano]

Tryed this tool and the result is useless for me.

[@TheEdgeofTech]

Why is that? What made it useless? Did you use a picture that was clear and straight on?

[@mrmechano]

​@@TheEdgeofTech I tried famous psychology photos like Bion, Winnicott, Rorschach, there are frontal photos of these characters, and the result is always very deformed. Useless for a high quality bust. With this tool I can make a bust only for my grandmother who doesn't see well.

[@tommy400ex]

Couldn't get it to work very well for me.

[@TheEdgeofTech]

Can you tell me what didn't work for you?

[@Mickparrysstepdad]

Same here. I've got some very clear, close-up photos of the kids, and the model looks similar'ish, but not great.

[@truantray]

Using a picture of the next US president, you can use up any left over Prusa Orange filament.

[@TheEdgeofTech]

Lol

[@liamhunter2000]

Or you could use brown...💩

[@merrillalbury8214]

I guess you need to say how to get credits to do this.

[@bryanfoster362]

I’m assuming you have to buy them

[@hwops234]

​@@bryanfoster362 you can cash in bambu gold for tokens for free

[@TheEdgeofTech]

Thank you for responding

[@TheEdgeofTech]

If you go to maker world it and fill out your profile, you get 20 gold. Then if you add any models or review other people's models etc. They give you more gold. You can in turn trade that gold for credit in maker lab!

[@lifeandloveabundance]

How much credit you need to make this Lincoln head ... and how much would it cost in cash for the credit

[@thetacticaltortoises]

How much would it cost if you had zero credits?

[@TheEdgeofTech]

I'm going to find out and I'll update this!

[@Ale_giro]

​@@TheEdgeofTechthat's ridiculous, you do a video and don't know the basic stuff: how to get points/credits.

[@flaekingr5109]

​@@Ale_giro I think there's a quid pro quo at play here that he's failed to disclose

[@christosvolikakis1523]

@@Ale_giro I was able to do it right away without credits and points. It wasn't required. Remember that this is a fast evolving industry and Bambu seems to change things overnight even in the short time I have been learning.

[@christianbock8592]

cool in German Ton THANKS

[@TheEdgeofTech]

Hi! How are you hearing it in German? I keep seeing comments about this but I don't know how people are doing it?

[@christianbock8592]

@@TheEdgeofTech i dont know, startet you video and i cann hoer in german, not a feature from you channel?

[@christianbock8592]

@@TheEdgeofTech in youtube player setting is in this video AUDIO in Germany !!! AI Sound support (nice idea)

[@TheEdgeofTech]

@christianbock8592 haha I didn't even know it was a thing until people were commenting here. 😂

[@christianbock8592]

@@TheEdgeofTech You have audio in 6 languages ​​here, unfortunately this is not possible with the HueForge Turorial Video, the selection is missing 😞

[@c.rutherford]

There goes more jobs lol

[@erikmatz3072]

No english audio anymore? The youtube app only shows "german" audiotrack without any choice for english. Nuts!

[@jamespaull5888]

??? it's English

[@erikmatz3072]

A link in the description tells me dubbing is on. Seriously, why? And no way to switch back to english, like the lnk suggests. >>> Use automatic dubbing Automatic dubbing generates translated audio tracks in different languages to make your videos more accessible to viewers around the world. Videos with these audio tracks are marked as “auto-dubbed” in the video description. Viewers can always switch to the original audio track or to another available language in the video settings. Automatic dubbing isn’t yet available for all creators, and you can only manage it on KZbin Studio on your computer. This feature is turned on by default. When you upload a new video, dubs will be automatically generated. These dubs will be published automatically for non-experimental languages.

[@GordoGrande69]

This is a you issue. Check your settings

[@TheEdgeofTech]

I am not sure what you're seeing because I just had someone else look up the video on a different device next to me and it's fine in English.

[@TheEdgeofTech]

I agree, it was English when I recorded it and And playing English on any device I try.

[@PhokingRadical]

Very cool! I pity the fool who doesn't print up a Mr. T.

[@TheEdgeofTech]

@@PhokingRadical haha 🤣 YES!! Do it and tag me on social media!!

[@fw_uke_ha]

This is frustrating, german audio and this also really bad... Please stop translating your videos with KI! Horrible!

[@TheEdgeofTech]

@@fw_uke_ha I'm not sure how you are hearing it in German? Do you have it set to translate?

[@fw_uke_ha]

@@TheEdgeofTech No, German is the only language that the KZbin app presents to me, and this automatically. It looks like this is a new YT function, as criticized here by another German creator> kzbin.info/www/bejne/l2bViaGLrpV-pq8

[@TheEdgeofTech]

@fw_uke_ha dang. That's not cool

[@3DEvann]

@@fw_uke_haclick the settings icon then audio track then english

[@fw_uke_ha]

@EvanPrinting This does not work. Only German lang is presented. In the browser I am able to choose from. I saw that this is a problem of the app and some android versions. KZbin messed up again. Beside that the function itself it really horrible.

[@oli4572]

Wtf is this with this terrible AI Voiceover?🤮 And no way to turn this off...

[@RC-Flight]

Not only is the voice AI,the so called person in the video is AI generated too. He is a hologram image!

[@oli4572]

​@@RC-FlightWhat else then a stupid first comment. KUDOS! How old are you, 12? You might need AI to learn how to read the video description? This is the first one in this Channel vith automatic AI Video translation and this hurts. Not the first Channel who seems to work with that. For example Mark Robert also does. Unwatchable...

[@GordoGrande69]

This is a problem on your end lol 🤡

[@GordoGrande69]

​@@RC-FlightI can't tell if you're being sarcastic or serious but hilarious either way. Jim is very real and very cool, met him at RMRR in Denver in April.

[@TheEdgeofTech]

Thanks! I was hoping I was still real!

[@mauricetotor4790]

Jim, You forgot something.....

[@TheEdgeofTech]

Hi. What did I forget?

[@flaekingr5109]

Uses credits each time you generate from an image? What a scam!

[@Zekealot]

Life ain't free bro

[@flaekingr5109]

What a clever insight, you come with it all by yourself? Weak excuse you tell yourself to justify someone ripping you off. There'll be a free version of a tool like this around, or one that's a one-off payment to have access to.