Turn your Garmin Fenix 7, Epix, or Enduro into a Bike Computer!

Use your Garmin Fenix 7, Epix, Enduro, Tactix Delta, or even COROS VERTIX/VERTIX 2 as a bike computer. You can get the Garmin QuickFit Bike Mount here: geni.us/GarminQFBikeMount
Handlebar mount for any other type of watch: geni.us/WatchHandlebarMount
K-Edge Stem Mount: geni.us/KKkP
(Amazon affiliate links that help support the channel - thanks!)
Full list of compatible devices with the Garmin QuickFit Quarter-turn Bike Mount here: www.garmin.com/en-US/p/717689
Budget heart rate straps: • Best Budget Heart Rate...
Bike Computers I recommend:
Garmin Edge 830: • Garmin Edge 830: NEW P...
Garmin Edge 530: • Garmin Edge 530: NEW M...
Wahoo ELEMNT BOLT V2: • Wahoo ELEMNT BOLT V2 I...
Garmin Edge 1030 Plus: • Garmin Edge 1030 Plus ...
Garmin Edge 130 Plus: • Garmin Edge 130 Plus I...
Wahoo ELEMNT ROAM: • Wahoo ELEMNT ROAM Long...
Thanks for watching!
/// Gear I Use (Amazon links) ///
Wearable: geni.us/Q6LJv2y
Bike GPS: geni.us/4cKAVA
Chest Heart Rate Strap: geni.us/hrm-pro
Arm Heart Rate Strap: geni.us/ESAv
Headphones: geni.us/tarahpro
/// Connect & Updates ///
Twitter: / getdesfit
Instagram: / getdesfit
Strava: / strava
Facebook: / getdesfit
Videos may contain affiliate links which can help support and grow this channel with no extra cost to you. Thanks for your continued support.

[@AllenStauffer]

This probably works great for the MIP displays, but just a heads up for anyone looking to do this with an Epix - it doesn't seem to be possible to stop the screen from dimming after the timeout parameter (longest is 15s I believe). For me personally, where I usually ride, the watch screen isn't readable once the screen dims, so I have to reach down and push a button or touch the screen to wake to read, which can be dangerous while mountain biking. I bought an 840 and had issues that led to returning it - bought this and was hoping to use my Epix instead, and it works, but has enough friction that I probably won't be doing it long term. If I had a Fenix still (so the screen would be visible all the time on the handlebars) I'd probably be happy enough with this long term to not be tempted back to a dedicated bike computer.

[@mlegrand]

Ok, that Casio watch 😍 Glad it's getting so much usage. It's interesting that these quickfit bike mounts are slightly different than Garmin's older triathlon quick fit stuff that comes with the tri bundle. I know that the 945LTE not working with that tri quick release system has been a deal breaker for some people. I love that you went down this rabbit hole. Thanks for making this one!!!

[@DesFit]

The rest of the watches were on the table, so what to wear? 🤷‍♂️ This was a fun one. Thanks Matt!

[@33scottyp]

I just recently purchased this item from Garmin. As much as I love my Garmin Instinct original, I really like the activity display and training metrics my Fenix 6 collects. This way I can this use my Instinct to broadcast my HR to the Fenix on my MTB. Thank you for another great video. You never disappoint.

[@DesFit]

Thanks so much, Adrian!

[@MarkShroyer]

Thanks so much for posting this! I had one of the "one size fits all" adapters you mentioned as an alternative, but I had no idea these quickfit-specific adapters existed. Count this an affiliate-link purchase well earned :)

[@DesFit]

Thanks so much, Mark! Enjoy!

[@OtterJohn667]

Thanks for trying the 945 on the quick-snap mount...that definitely answers the question on fit that I couldn't find a straight answer to anywhere else. :)

[@-DMD-]

Just an old bike tube, cut to go once or twice around the handle bar folded up tight and 1 round of black electrical tape. Best mount ever. Cheap, compact, easy to repair, and I never have to take the watch straps off, so I don’t have to store them somewhere during the ride. Just put the watch like you put it on your wrist. (You fold the tube to match the size of the watch strap, so while mounted it can’t even be seen.)

[@nilsk2594]

I have a FR 945 and use the Garmin Quick Release Kit. Works perfectly fine and looks even nicer then the normal QuickFit Bike Mount.

[@pgesqsj1]

Whats the reference of the item? Would it work with FR955?

[@neogreen3075]

Exactly what I was looking for! Great Video!!

[@ravona1]

Before Garmin had this solution I took and old Fenix 3HR charger, dremeled a bit of the charger port and slabed a quarter turn sticker to it. It fitted very well on my F5X / 6X. Now that this is out I ordered it about a month ago and it's much more elegant.

[@DesFit]

Nice solution for the 3HR!

[@robj3773]

Des thanks for exploring this... My solution in the past has been to simply wrap an old sock around the handlebars and strap the watch over that. That increases the handle bar diameter and provides padding too.

[@DesFit]

Yup, that works too!

[@phileasfrogg273]

Damn. Simple but excellent.

[@Will-ol9lp]

Great video Des. It’s to bad that Garmin isn’t giving any love to the Fenix 5X Plus. Thank u for all the hard work u do to make the videos that we all love to learn about

[@DesFit]

It could be that it wouldn't be cost effective to make this mount for a previous generation device. Thanks for tuning in 👍

[@Dizzlaeus]

I have the 5x and it is a bit of a tight fit but still works great.

[@wrenpyle7098]

ALSO !!!!!!! if you double wrap your bar tape all the way to the stem you can just strap the watch directly to the bars. been riding with mine like that for years and its super easy and reduces pretty much any possibility of the watch coming loose.

[@mikedunn8658]

I've used my Fenix 6 like this for a few years; I bought a c. $20 Garmin bike mount for it, and works nicely.

[@DesFit]

👍

[@fretboardrunner]

What do you think about the screen size and readability compared to a bike computer? I'm also considering a Fenix, because then I could use the same watch for hiking, running and cycling.

[@hardmtnbiker]

I did the watch mount for years but this started back when my Polar watches didn’t have HR sensor on the watch. The older models all required a HR strap. I honestly think that the “value” from a Garmin Edge 130 or 530 is almost all the same features as the Fenix but half the price. You just need a HR sensor and of course you won’t get all the off bike data.

[@DesFit]

The 130 is a great value, for sure 👍

[@rocheuro]

WOW thanks for this video, Im just gonna put my amazfit Pace into my front handlebar! perfect!

[@DesFit]

👍

[@Dizzlaeus]

I use this system for my 5x and the 26mm and it is a snug fit but still works fine. Great vid, thx Des.

[@javierhenao563]

The main reason why I changed from cycling computers to wrist bike computers to call it somehow, is because during a mountain bike competition I had a crash and the thing fell off and I didn't notice, lost some bucks there, it was a Polar. Now I have a Garmin Fenix 6 pro and it feels more secure with something strapped to your wrist. I practice road cycling now. Something else with a watch you wont have the risk of someone walking away with your cycling computer while the bike is parked. Anyway thanks for the video, good to know there are all these options.

[@scientia_potentia_est]

This is by far the best solution available. Thanks for this super useful video! The next best solution would be getting an Edge and using Extended Display Mode, but at that point you might as well just use the bike computer and connect it to whatever external sensors (i.e. HR straps, cadence, etc.) you have. Would be super cool (and I would pay big $) if Garmin had the same Extended Display Mode but for their iPhone/Android Apps, and also included all data screens in addition to full maps/navigation features like Strava Live Segments and Course Nav. Put an anti-glare screen, and that would literally turn your phone into the most powerful bike computer that has ever existed lol bc you get data from all Garmin sensors and Course navigation in a huge display and you can also control music, have quick access to Google Maps whenever needed, etc.

[@imaXkillXya]

I modified an adhesive garmin adapter with some velcro. I saw someone selling them on eBay but made it myself.

[@fsdk2]

Thx a lot for all the info :)

[@DesFit]

You’re welcome!

[@leocmen]

It is pretty good material Thanks for sharing

[@DesFit]

You’re welcome 👍

[@johnmanley4528]

Hi Des. Nice video. When you have the Epix mounted like that, is the screen easy enough to see? I am not sure if it dims to the low brightness setting when the raise function is not activated when mounted.

[@lydsrod4933]

This is great and super helpful. Thank you so much.

[@DesFit]

Glad it helped. Thanks!

[@lydsrod4933]

Hi Des. I do have a question for you. Have you ever considered testing all the footpods, the new HRM Pro+ etc, to see their accuracy and who is the most accurate? I was just curious. Just wanted to throw that out there.

[@DesFit]

Foot pods are generally the most accurate when it comes to pace/distance estimation.

[@100ps8]

Thanks for the good info

[@DesFit]

No problem 👍

[@ollie6512]

What is your thoughts on this on a dirt bike? The reason I ask is the vibration! Do you think the vibration would cause issues? Or if the quick fit would be man enough to keep hold of the device. Thank you

[@markus8222]

Thousands of pounds worth of high end gadgets on the desk and wears a cheap old skool Casio 😂 I often do this myself..!

[@DesFit]

The rest of the watches were on the table 🤷‍♂️😁

[@_gtkoko]

I measured my 5x Plus bar-to-bar (outer sides, no wrist band of course) with a caliper, and it is 54.5mm: can someone tell the same measure from a 6x? This way one can deduct if the 5x is "informally compatible". Thanks!

[@Jr6892]

Nice video! I purchased for my Fenix 3 and fits perfectly! The only problem that I suffer since I installed is that the watch doesn’t get the altitude of the training, something that doesn’t do while I wear the Fenix on the wrist. I recalibrated the altitude sensor, but doesn’t work. Anyone with the same problem?

[@pvlifestylefitness]

Excellent work my friend 👍 new friend here 😊Thank you very much for sharing 👍

[@DesFit]

Sure thing

[@kevinbowman7701]

I was using the Garmin solution strapped on to my MTB handlebars. Unfortunately, I took a minor tumble that sent my Fenix flying off the handle. Fortunately, I was able to find it but the rubber straps (from the kit) aren’t a secure as a stem mounted option.

[@ADEESMUSIC-dr6yo]

Great review. Is there a way to display Garmin watch on computer screen while doing workout at home via bluetooth?

[@urmomisfineinbed]

Because of this video i used my Instinct 2 as a bike computer with the 20mm mount for a whole season. 0 issues and the wiggly he describes really doesn't affect the hold, it's just able to slide side to side! the epix pro does not fit the older quarter turn mount kits, make sure to get a new one (they updated the product number)!

[@marcusthebeast2570]

thumbs up for the karoo mount on your bars

[@DesFit]

🙌

[@gizmo6746]

That is really handy, no more messing about with a stand alone gps. Just click on your wrist ?

[@stevemurray710]

Well my edge 130 has a lanyard which gives peace of mind. I unexpectedly got a great deal on assiomos duo which 130 handles only uno so I use my Fenix 5S. 5S is a bit small for old guy who needs bifocals. Waiting to see if a new release of bike computers will entice me or maybe a larger Fenix 7.

[@DesFit]

The lanyard does provide peace of mind, for sure. 👍 I've literally only had two incidents when a bike computer has fallen off but it definitely can happen.

[@kubaja]

Hi, thanks for video. Maybe you know what about new Instinct 2X? will it fit 26mm mount? Regards

[@mmirko77]

45+ here. The advantage of having a watch on your wrist is that it can get as close as possible to your eyes when you are checking the data/maps. On the handlebar, as I do MTB, I find it to be less visible forcing me to get close with my head to the handlebar to check the data, not really ideal. I am old I know.

[@mariopejovic]

another great, informative video Des. doe these mounts feel sturdy and secure to you, to trust them on mtb rides? devices like Garmin Edges can use additional strap to secure device to the mount, so it doesn't fly off when you crash. would you trust these mounts on rough terrain?

[@DesFit]

They snap into place very tightly. There is still the chance of the watch becoming detached though. I'm not sure of a way of attaching a tether like the bike computer but you do bring up a very good point. Thanks!

[@christianhagen4181]

Great video! Would the quick fit solution work with Polar Grit X watches?

[@simdencard]

I would like to know if the Garmin Instinct 2 can be used in this way and is thier a dedicated mtb bike watch holder for it? Thanks 😊

[@krissche1863]

I run my phone on a quadlock head unit mount with the supercycle app, my Fenix watch on my stem (road bike) with a mount like you have Des and to my watch I have a varia radar and avaria vision paird. No need for a bike computer.

[@juffkasvennsson4609]

Yeah nice Video,I just started MTB and I dont have a bike computer. My main focus is navigation, can I ue a Watch for that ? Im not interested in all the numbers (yet)

[@juliettedumouchel6021]

Excellent products …

[@FormulaChemicals]

Hello! Regarding your video on Garmin quarter turn bike mounts (20mm, 22mm, 26mm), I would like to know if Forerunner 745 can fit in either 20mm or 22mm mount?

[@rererv7]

thank you for the very informative video. as I already have Garmin Forerunner 745, can I use it as bike computer just like in your video?

[@jasper7257]

I think only with a solution where you use the watch strap to put it around your steering wheel, but that works fine as well. I'm also using this watch for cycling including (simple breadcrum) navigation.

[@jonathannarinx1554]

Hi! Thanks for the video! Any idea if it is possible to avoid the Epix to dim to low brightness after a certain timeout (4s, 8s or 15s but not possible to deactivate)? This is super frustrating, especially on a road bike when you use the navigation and cannot see anything without touching the screen or pressing a button; at full speed it becomes dangerous.

[@martinev.b1012]

Same here!

[@robertrolannapitupulu4354]

If I use this setup, would Garmin fall detection still work?

[@AndiChg]

I have been using that silicone to mount my Fenix on my bike handle bar. Then take it off for running thereafter. haha

[@DesFit]

Nice!

[@neows6]

Thank you for the awesome info. Can you elaborate how Garmin Connect would handle data collection if we were to use both a watch and a Edge device? I currently run a Edge 530 with a HRM-Pro chest strap, with a Epix 2 on the way. I understand Physio Trueup will enable syncing, but is it smart enough to prioritize the best measurement of each? For example Im a MTB'r I therefore use the Edge for jump tracking, flow, grit, Strava segment tracking, and of course the HRM-Pro for HR. If i now add the Epix to the mix will I be able to also get live PulseOx (VO2 Max), PacePro, Real-Time Stamina etc. Yes I like data :) Do you use the screen mirror function? Which is best to set as primary etc.

[@neows6]

I'm getting a feeling that in combination with how they don't play well together and my own completely conspiracy theory of an upcoming new Garmin Ege device that will better interface with the current watches we won't get a clear cut answer.

[@uosocal]

Can the watch pair to my ebike or sram axs system?

[@pinank87]

Can u tell which k edge product have u suggested for mounting it on the stem?

[@skellener]

Any chance those quick fits would work with a Fenix 3 with the bars without a band ?

[@francobornmann1637]

I use my Epix Pro Gen2 on my handle bars as my main bike computer. Is there a way to keep the screen on?

[@rvanemst]

@desfit, you still have the FR 965. Can you try if it fits? Thanks, i can't find any answers below.

[@andreabartoli8278]

Great stuff but but the FR watches are not mentioned in the video? What about the 955?

[@etiennesalinasfagalde]

You try?

[@defiets9332]

For me, and maby other YT, will it fit other brands like Polar or Suunto?

[@DamirUlovec]

7:35 Brilliant idea! How come I never think of that?

[@elmoro160]

That mount can fit or work for fénix 5 with 22mm

[@stuartmenzies3928]

wow! handy

[@jonasmatterne9182]

Thank you for the video, great content as usual. Would someone know if the new FR955 fits the quick release bike mount? Thanks

[@Husseinabdelkader_]

did you know the answer ?

[@etiennesalinasfagalde]

Did you Know?

[@ernestcarual8796]

Nice! I wonder if the Coros Apex Pro will fit too?

[@DesFit]

The Apex Pro doesn't have the thicker pins/bars needed for this type of setup unfortunately.

[@LuisMunoz-sp7pq]

Hey, I have a garmin fenix 5, and im looking for this type of mount. Does it works with it?

[@mike1506tube]

Is that Casio CA-53? That is one of the coolest watches still available today.

[@DesFit]

Yup!

[@fezzwheel2572]

I use the $9 Universal Handlebar Watch Holder from Decathlon

[@DesFit]

👍

[@100nirosta]

Hello. Please make a comparison between wahoo tickr fit vs polar verity sense. This is what is missing from your channel. Why do you think Wahoo and Polar don't add SpO2 to their products? For many it is important. ,-.

[@DesFit]

I’d recommend the Verity Sense. More features and more current. And not sure why SPO2 hasn’t been added by some manufacturers.

[@fc-8843]

Bike computer not needed. Quad lock makes a great case and mount so you can mount your smart phone to your handlebars. This also alleviates me having to carry my phone in my pockets. iPhone GPS is also super accurate. Combine with Ride with GPS or Cadence App and you're set.

[@DesFit]

Quad lock cases are great but mounting a phone to the handlebars isn't ideal for activities like mountain biking due to the possibility of crashes.

[@Squirrel123_]

Will this also work en useable for a motorcycle?

[@CoachRiqui]

Hi Des!!! I was actually since Sunday in the look of a solution/option to have to take my hands out of the handlebars to check my cadence and such, all because I’m riding in the early mornings when is still dark. This brings me to my question, have you tried out on a Fénix 3 HR Sapphire? I would greatly appreciate it! That would bring life to my old and neglected Fénix. THANKS!

[@DesFit]

The Fenix 3 HR isn't compatible with the QuickFit Quarter Turn mount accessory due to a different lug to lug distance but you could use that other accessory which wraps around the handlebars to mount your 3HR. Thanks and happy riding!

[@rideSYV246]

Hi! I’ve been using my 3HR for many years with a strap on mount as Des mentioned, it works but not always visible in certain lighting and angles. I’m considering the Edge 130 at $199.

[@adammillsindustries.]

What about a tether to save incase it falls off?

[@dr.navidsoltani4326]

Do the new the 965 / 265 work?

[@FarhanBorst]

how secure is this? at least for cycling computers u have those little string stuff where u can loop around the bar

[@vil4242]

Hi DesFit, currently i'm using garming fenix 3 HR for cycling. I wonder if there any mount for my garmin fenix 3 hr to attached into handle bar? Can my garmin fenix 3 HR using sensor like HR Strap and speed/candense sensor? Thank You

[@rideSYV246]

I use my bar mounted 3HR connected to a Garmin HRM Dual, A03711

[@jonweber5330]

Can the forerunner 945 do the same thing?

[@Liewie]

Is all this good enough for my motorcycle? Does the navigation be good enough for that? I had my hands on a BeeLine Moto for my bike and want to buy a Smartwatch. If it will work with vibrations and the Navigation is great aswell, i would buy it asap!

[@DesFit]

The navigation on this device will include bike paths and pedestrian trails so not really.

[@user-zu4nl7bm9e]

But, Hey, It works ---- I like this words, subbed.

[@sakthi.tv.NU7400]

Great video Des. Can you check if it fits on Fénix 5X Plus?

[@DesFit]

Unfortunately it doesn’t. The lug distance is different. Sorry but thanks!

[@sakthi.tv.NU7400]

@@DesFit thank you for the swift reply.

[@taneltom5497]

Can I use Fenix 3HR with quickfit?

[@rossisbonsaiandavocados5785]

Hi great video. I have a 6X Pro would that be the 22mm mount or 26mm mount?

[@rideSYV246]

51mm watch = 26mm mount.

[@ThePakovia]

is it possible to pair garmin tactix with sram crank powermeter? which datafield should i use? thank you

[@DesFit]

Yup, the Tactix can pair to any power meter that has ANT+ or BT (which the SRAM has). You can then add tons of different types of power related data fields like power, average power, 3 second average power, normalized power, etc… The list goes on and on! Thanks

[@juanpatriciocastillo1410]

Do the ones on the Apex also work on Pace 3s?

[@salohar]

hi there! can i use it for my mk2i?

[@noohehab]

Perfect video, I’ve searched for that info couldn’t find it anywhere, I’ve marq adventurer. Very similar built to fenix 6. do you think it will work?

[@DesFit]

Hmm, that's an excellent question since it's based on the 6 series. I don't have one of those unfortunately so I can't verify, but from the list of compatible accessories on the Adventurer the QF Bike mount isn't listed, just the watch strap version. www.garmin.com/en-US/p/699548#accessories

[@noohehab]

@@DesFit thanks for the rapid reply 🙏

[@DesFit]

Sure thing 👍

[@pitaklaus585]

That mount fits on a garmin fenix 3 hr?

[@karelvdd]

Interesting video. I just checked: I have a Garmin Fenix 7X Sapphire Solar and a Garmin HRM Pro and apparently it is impossible to connect the HRM to two devices at the same time. So if you want to use the HRM Pro on your Fenix then, which bike GPS should you get then, since it doesn't need to be connected to the HRM strap? So actually the bike GPS should only be used for the maps.

[@DesFit]

Hmm, I connect my HRM Pro/Pro Plus to multiple devices via ANT+ on a daily basis (Garmin or otherwise). Are you connecting via bluetooth and possibly having a connection with your phone at the same time?

[@karelvdd]

@DesFit No. I don't have a bike computer. I just googled and it said the HRM Pro can not connect to multiple devices at the same time. It must be connected to the Fenix 7 via Ant+ since theFenix is connected to my phone via BT. I was just wondering which bike computer is the best for mais and connecting to the Garmin Connect app only then. The 1040 must definitely be too much. Touchscreen is not necessary either. The 130 might be to basic, no? 530 or 540 then maybe?

[@galenkehler]

I'm curious if anyone has made native out front mount for these watches, not an adapter. Seems odd that there are 2 bars in the quick fit system that seem secure and robust, that they just mount the flimsy quarter turn tabs via an adapter, also increasing the stack height. Anyone already doing that or do I have to build my own as usual 😆

[@Bombolotska]

what settings to you recommend for a bike ride with the epix? Activate always-on display and deactivate gesture during activity?

[@Bombolotska]

last time i rode with the Epix the screen went bright with every vibration on the handlebars, which means constantly, some advice to circumvent that? Because that must eat battery...

[@Tom-ct9xw]

@@Bombolotska On my Epix 2 it is always on but not with full brightness, so it will dim after the selected timeout. I think they only turn on every second pixel and move these to prevent burn-in. It only it on full brightness when I touch it or press a button. So I wouldn't worry too much. Usually the dimmed display is bright enough to see the information on the bike.

[@jovecvetanoski4057]

For cycling/hiking best choice is gps, glonass or galileo?

[@DesFit]

Kind of depends on the region where you live. If you're having an issue with one setting, try another to see if that yields better results.

[@doogie64]

So, I just got on to find an answer to this long-shot question. My Epix recommends cycling workouts based on my training status. Does anyone know if there is a way for those workouts to be added to Zwift or another app?

[@ianpogi5]

I add them manually to Zwift. If you find a better solution, please post it here.

[@doogie64]

@@ianpogi5 great ideas actually. I’ll give it a shot.

[@Husseinabdelkader_]

Can garmin forerunner 955 fits it !?

[@jenueheightz6851]

Ok. How do you mount that thing in the handle bar? Do we need to purchase any additional parts to mount it?

[@DesFit]

It comes with a quarter turn mount for your handlebar like you can see at 3:52. Then there are tons of other kinds of quarter turn mounts that are available depending on your application.

[@rickeysantos]

Is the forerunner 965 compatible?

[@adammillsindustries.]

I’ve been thinking of selling my Wahoo bolt and use my Epix Pro for everything.

[@ivanteo1973]

1:58 I have been using my Fenix 3 like this for years.

[@DesFit]

👍

[@leonwatson4679]

does the fenix 3 saphire hr fit in this?

[@bike314]

I wish mounting my watch on the bars enabled jump detection on watches

[@DesFit]

That would be cool!

[@piltrid1]

Great video...but, unless you are doing a zero cost option, wouldn't you be better of by tracking everything (including heart rate) with the watch on your wrist and just buying one of the cheapest GPS (or non-GPS) bike computers for your bike display? Works out same price as some of the mount adaptors (and cheaper if you have to buy heart rate strap), all whilst having better on bike visibility and maintaining all watch metrics?

[@allanwetzel8038]

How about the fenix 5/5s as they are also quick fit? Are they compatible?

[@DesFit]

I don’t have any Fenix 5 watches around so I can’t verify, but they aren’t listed as being compatible so I’m unsure if the lug to lug distance would work.

[@ihasmeapoortv]

Nope. Does not work for the 5 series. Lug to lug distance on the Fenix 5 series is larger than the 6 and 7 series.

[@DesFit]

Thanks for checking, @ihasmeapportv 👍

[@cliftonmassey3143]

Will those mounts work with the Samsung watches?

[@DesFit]

Nope

[@calendar9497]

What I would really need for this use case is a Strap that continues under the watch, with a cutout for the sensor, so I can pop out the watch, but still keep the strap on my wrist. It's quite annoying otherwise.

[@DesFit]

Not a bad idea

[@marcwanagas1234]

Those straps exist for Fenix watches.

[@paginini]

Sick u can do that omg .. leaning towards watch more n more