LOL I am sure I have some old footage like that someplace of when I first started, makes ya laugh at yourself to see you didn't know what you were doing, hands on learning at it's best, Thanks for sharing Rod, have a great weekend, thumbs up as always
@RHumphrey Жыл бұрын
lol, the old hammer and screw driver... oldie but goodie! Quite the learning curve back then... I had no idea what I was doing, but I had watched a good amount of Carl Jacobsen videos, so I approached it with the confidence of a tool wielding couch potato! 🤣
@jayscott306 Жыл бұрын
Thanks for reviving this old one, Rod. It was an enjoyable watch. I enjoy going way back in people's uploads to see how much they've changed and grown since earlier days.
@jarmstrong2843 Жыл бұрын
As Yogi would say, I thought it was “Deja Vu all over again” when I saw that old Jet lathe. Semper Fi
@RHumphrey Жыл бұрын
It was a blast from the past for sure! I wore that Jet lathe out! ...still have it, but it's in storage. Semper Fi, brother!
@darlouthia5153 Жыл бұрын
Recycling at its finest !! Even the footage ❤😅
@RHumphrey Жыл бұрын
So true, lol! Thanks, Darlou
@russellstevens8461 Жыл бұрын
Rod another great job. God bless.
@RHumphrey Жыл бұрын
Thanks, Russell, always good to hear from you my friend!
@jeanlong4285 Жыл бұрын
Beautiful results
@glencrandall7051 Жыл бұрын
An oldie but goodie. Thanks for hanging on to that one. Have a great day and stay safe.🙂🙂
@RHumphrey Жыл бұрын
Thanks very much, Glen! You do the same!
@ellengraham4677 Жыл бұрын
I'm so glad that plastic didn't cause any damage, thanks for sharing an oldie but newie. Stay safe God Bless😘😘
@RHumphrey Жыл бұрын
Me too! Just watching the old footage made me cringe a bit at the thought of it! Thanks, Ellen!
@lyndacarter5090 Жыл бұрын
Very pretty.
@mohamedemam7695 Жыл бұрын
I watched your video while I was in Dubai now I'm in America and I still watching you I have to admit you have great job ...
@RHumphrey Жыл бұрын
Thank you so much 😀 Safe journeys my friend.
@suepeterson5675 Жыл бұрын
So interesting 👍 ! Peace be with you✌🏼.
@RHumphrey Жыл бұрын
Thank you, Sue!
@maddieadams75 Жыл бұрын
Nice job Rod thanks for sharing ❤
@RHumphrey Жыл бұрын
Thank you, Maddie!
@paulrapp6 Жыл бұрын
Rod, Most interesting. When you were turning the outside of the bowl it appeared to be giving you a fight like a 600 pound marlin on a fly rod! I never have seen resin put on a show of reluctance like that since I started watching turning videos. Your end product is extremely pleasing to the eyes. Thank you. Keep the aspidistra flying! God bless, Paul
@RHumphrey Жыл бұрын
haha! Thanks Paul! It was the hard plastic bowl I used as a casting form that gave me fits. All good though, lessons learned the "hard" way!
@ellenyager9577 Жыл бұрын
So pretty! And it GLOWS! Cool! God bless, and Semper Fi!
@RHumphrey Жыл бұрын
Thank you, Ellen!
@AlienLeader4 Жыл бұрын
Very cool visit to the past. Keep up the great work. Semper Fi! 👽
@RHumphrey Жыл бұрын
Thanks, will do!
@RatelLaw Жыл бұрын
Thanks Top
@RHumphrey Жыл бұрын
Thank you, Michael!
@jnol9009 Жыл бұрын
Nice bowl no matter when it was made! Well done, thx, and take care.
@RHumphrey Жыл бұрын
Thanks, J 👍
@itatane Жыл бұрын
A blast from the past to see the old Jet lathe. I will have to tell my kid sister about that mask. She has developed a frightening reaction to cutting her grass in the past couple years (wheezing and losing her voice). Thanks Rod!
@RHumphrey Жыл бұрын
Thanks Pete! Yes, it really is a great product. Whether folks use my link or not, I highly recommend these masks. They're a cut above. Thanks again!
@cookiescoop6065 Жыл бұрын
Looks great sir have a great weekend ✌️
@RHumphrey Жыл бұрын
Thank you, and you as well, Cookies!
@jackthompson5092 Жыл бұрын
Beautiful Rod.
@RHumphrey Жыл бұрын
Thank you, Jack!
@spindlesworkshop9744 Жыл бұрын
Thank you for this blast from the past!
@RHumphrey Жыл бұрын
Thank you, Luie!
@williamellis8993 Жыл бұрын
That's nice, Rod. Glad you were finally able to share it with us. Bill
@RHumphrey Жыл бұрын
Thanks very much, Bill!
@alansimpson596 Жыл бұрын
Thank you Rod for the trip down memory lane. I've been turning for about ten years and made every mistake in the book including breaking my wrist when a piece flew off the lathe. The one aspect of health I care about more than any other is my lungs as I lost a few friends from lung disease. Those dust masks seem to be of very high quality and I won't turn without wearing a dust mask. Semper Fi.
@RHumphrey Жыл бұрын
Thank you very much, my friend. Sorry to hear that. I was very undisciplined regarding masks and lung protection when I first started turning, another lesson learned over time. I'm glad to now be able to represent a quality mask. Be well and Semper Fi
@janeoverby2151 Жыл бұрын
It is beautiful. Got some old stuff here when I first started turning, too. Haven't turned any resin, though. Gonna have to try that.
@RHumphrey Жыл бұрын
It's fun... messy fun! I don't use resin as much as I probably should... Thanks, Jane!
@Smallathe Жыл бұрын
Tough project. Lovely bowl!
@RHumphrey Жыл бұрын
I made it much more difficult that it really was, lol! Thank you!
@DougMilleratWoodSpunRound Жыл бұрын
Turned out pretty nice. Well done!
@RHumphrey Жыл бұрын
Thanks Doug, lived and learned from it, that's for sure!
@markduggan3451 Жыл бұрын
Just bought a lathe, and I'm looking forward to seeing what I can achieve.
@RHumphrey Жыл бұрын
Congrats, Mark!! I'm excited for you!
@rayworstine4399 Жыл бұрын
Good morning, Rod. Watching a turning project is a good way to get the day started. I have fixed a lot of stuff with a hammer, great tool. Saving shavings, absolutely the thing to do. In the end, a great bowl. I have been working on the shop, not turning in the shop. Needed a major overhaul. A slow process but who knows, I may find an old partially turned bowl to work on later. I enjoyed your video. Also, my mask arrived a few days ago. Looks like a winner. God Bless. Semper Fi
@RHumphrey Жыл бұрын
Hello my friend, Yes, hammers. If a hammer doesn't work, get a bigger hammer, lol! Thanks brother, I know you'll like that mask!
@michaelross8794 Жыл бұрын
Old project, NEW video....or was it just a veeeeerrrrrrrryyyy looooonnnnnng project?
@RHumphrey Жыл бұрын
hahaha! In reality, it took me years to find my hammer! 😁
@awesomecarsforever Жыл бұрын
Old or new you always do superb work Brother. The bowl is absolutely stunning. Enjoyed watching while drinking my coffee this morning. See ya for a fire and coffee soon Brother!
@RHumphrey Жыл бұрын
Thank you so much 😀
@chetnash5991 Жыл бұрын
Another fine piece of work, just had to take a screwdriver to the m+m shell first. And absolutely protect your lungs
@johnspencer1146 Жыл бұрын
Nice project Rod, its not a hammer its a persuader.
@RHumphrey Жыл бұрын
Persuader. I like. 😁
@WoodenItBeNice Жыл бұрын
Great little piece Rod and very nice to see the old lathe once again. I know I've said it before but the RZ Mask is amazing. Take care my friend. Cheers, Huw
@RHumphrey Жыл бұрын
Thanks very much, Huw! I appreciate that feedback on the mask, it really is a quality product. Cheers!
@matthewcienki8064 Жыл бұрын
I love it! Neat to see the former lathe in action. That project deserves to be on display in your shop. A symbol of beginings for your channel. Very cool!
@RHumphrey Жыл бұрын
Some one has it... or I've stuck it in a corner somewhere, lol. Thank you, Matthew, it was fun to edit a video seeing the old Jet in action again.
@rareaussie6960 Жыл бұрын
You couldn’t have said a more true statement protect your lungs guys! I didn’t I’m now dying from fibrosis caused from inhaling airborne toxins from wood and metal working I had been turning wood from the age of 8 I’m now 60 won’t see 65 so guys protect your lungs and eyes and ears we only have 2 of each and they are all you get 👍🇦🇺👍
@renatocpn Жыл бұрын
OMG! You lost a great opportunity when you said "It's hammer time". hahahah
@RHumphrey Жыл бұрын
Thought about it, I really did... lol, I think I may have chosen wrongly now!! 😁
@IcecalGamer Жыл бұрын
Really appreciate the footage at the start for the failure-to-eject 👍 What went wrong? Plastic melded with the resin (incompatible plastic type) ? Cured toooo hot? Or... ?
@RHumphrey Жыл бұрын
Thanks very much! It was either too little amount of mold-release applied prior to the casting, or incompatible hard plastic. Not sure, but I've never used that type of plastic again.