I make this pencil holder with scraps of pallet and a piece of Jatoba. I hope you like it. Instagram: bunkerTools
Пікірлер: 604
@heru-deshet3593 жыл бұрын
"You want me to throw out all these wood scraps"? Bunker Tools: "Hold my beer".
@bunkerTools3 жыл бұрын
hahahhahha i love your comment 🤣🤣🤣🤣 thank you
@randomsmile90643 жыл бұрын
wouldn't " hold my pencils " be more accurate ;)
@mattmicholas98053 жыл бұрын
What is the name of that tool used to spin the wood?
@heru-deshet3593 жыл бұрын
@@mattmicholas9805 Do you mean a Lathe?
@thestutteringwoodturner98243 жыл бұрын
@@mattmicholas9805 a lathe
@rowanrawlinson71003 жыл бұрын
I love that there is a hand planer, and no tail stock for drilling the big hole. Gives me hope that it’s not super expensive to start woodturning one day!
@renegadeninetyone5043 жыл бұрын
My favorite part of these woodturning videos is when they put the stain on the piece and the wood grain just comes alive!!! 😊
@joemilbourne31513 жыл бұрын
It never ceases to amaze me how these wood workers don't take the corners of the glued timber before machining it ... it would make the process so much easier !!
@markhollingsworth30973 жыл бұрын
Especially when they leave the tail stock out of the equation :-(
@dk24282 ай бұрын
Just picked up this lathe, open box, for 50€ LOL. Let the fun begin! Thank you for the inspiration!
@lindafromcalifornia11553 жыл бұрын
Scraps in the right hands becomes a beautiful useful holder. A master at work. Thanks for sharing.
@bunkerTools3 жыл бұрын
Thank you very much for your comment.
@Grinsauce4 жыл бұрын
I love pallet projects, that is beautiful. Thanks for making the video.
@bunkerTools4 жыл бұрын
Thanks to you for watching and your positive feedback.
@woodworkfrance50483 жыл бұрын
Really good
@markduggan3451 Жыл бұрын
That looks amazing, and I'm glad to have some ideas for using my Parkside lathe.
@philipmcquillen87483 жыл бұрын
Beautiful. Very clever, well executed and a great way to make use of pallet scraps. A really nice piece.
@bunkerTools3 жыл бұрын
Thank you very much!!
@alanm34384 жыл бұрын
What a great way to use scraps. You did a wonderful job.
@bunkerTools4 жыл бұрын
Thank you very much!
@andreachinaglia58044 жыл бұрын
With that grain orientation is much better to try to scrap in a direction parallel to the axis of rotation as possible, doing it in the way is shown in the video is to fight against the grain all the time, to cut is better, but deciding to scrape that is the way to go, while the technique used would have been correct with wood grain oriented parallel to the axis. I disagree with you my friend, not a good way to use the scraps given that grain orientation, and the tear out demonstrates it.
@brycemontano77863 жыл бұрын
That turned out really pretty!
@RS-nh9gu3 жыл бұрын
Beautiful. Ingenuity. Simple. Thank you for sharing
@bunkerTools3 жыл бұрын
Thanks to you!!
@awoodworkersson3964 жыл бұрын
Cracking transformation!! Nice job.
@bunkerTools4 жыл бұрын
Thank you very much!!
@mazzatime134 жыл бұрын
Looks great, top job there mate!! Im going to have a bash with some off cuts ive got laying about. Thanks for the video.
@bunkerTools4 жыл бұрын
hahaha Thanks mate, I'm glad you like it 👍
@autoventure27383 жыл бұрын
Brilliant! Scraps turned into art. 👍
@bunkerTools3 жыл бұрын
Thank you very much!!
@dagored40773 жыл бұрын
I'm going to try that! All I need now is a lathe and turning tools! Oh, I'll also need somewhere to set it all up in. However, I did enjoy watching you craft a beautiful item from little more that firewood.
@bunkerTools3 жыл бұрын
hahahaha thank you
@RO8s3 жыл бұрын
Off down to Lidl, with the rest of us on a Monday. Mind you, I've never seen that lathe in there - I shall keep a lookout...
@expatmoose3 жыл бұрын
@@RO8s try over the internet if you’ve not already got one, Aldi Germany sells such mainly over internet, not sure where you are though....
@RO8s3 жыл бұрын
@@expatmoose France, and they don't deliver here, at least not yet. I've got a mate in the Netherlands, and Lidl do catalogue over internet there. But he'd have to send it down...
@expatmoose3 жыл бұрын
@@RO8s oh that’s a 💩, still wish you luck though🍀👍🏻
@geraldbrooks27634 жыл бұрын
I've been wanting to try some hollow turning and was thinking I'd need to find a way to fit a drill bit to my shifty lathe to hollow out the forms. Never thought of just locking the spindle and using a power drill.
@bunkerTools4 жыл бұрын
That's right dude, it occurred to me this way and the result was good. Thanks for watching!
@woodworkfrance50483 жыл бұрын
Hi
@anitawiken-cawley68373 жыл бұрын
Absolutely gorgeous!
@bunkerTools3 жыл бұрын
Thank you very much!!
@woodworkfrance50483 жыл бұрын
Really
@jigsey.4 жыл бұрын
I must buy the lidl Parkside latte when they get them in again.. Fantastic build
@bunkerTools4 жыл бұрын
Thank you very much dude!
@maikharing48763 жыл бұрын
Wow, looks beautiful!
@bunkerTools3 жыл бұрын
Thank you!!
@altantis693 жыл бұрын
It was a WOW moment when the piece was revealed. Bravo.
@bunkerTools3 жыл бұрын
Thank you very much! 😊
@woodworkfrance50483 жыл бұрын
Really Wow
@kobiekaasjager48224 жыл бұрын
Absolutely awesome and stunningly beautiful.
@bunkerTools4 жыл бұрын
Many thanks dude. I'm glad you like it!
@tracywheeler12273 жыл бұрын
WOW, that came out Gorgeous !!
@bunkerTools3 жыл бұрын
Thank you!
@georgealderson44243 жыл бұрын
Beautiful in so many ways. Thank you. Blessings and peace
@bunkerTools3 жыл бұрын
Thanks to you dude 👍👍
@tonyisham93963 жыл бұрын
Beautiful piece bud. Well done
@bunkerTools3 жыл бұрын
Thank you very much dude.
@mikerobertson73114 жыл бұрын
Awesome looking piece.👍👍👍
@bunkerTools4 жыл бұрын
Thank you very much dude 👍👍👍
@peterpan95644 жыл бұрын
Stunning work and workmanship, turned out really nice 👍👍
@bunkerTools4 жыл бұрын
Thanks a lot dude, your comment is very nice 👍
@richkeelan13123 жыл бұрын
Really like the grain in different directions Great job
@bunkerTools3 жыл бұрын
Thank you very much!!
@stewystewy3847 Жыл бұрын
Vary nice. Good way to use up your scrap wood pieces.
@madiradesign4 жыл бұрын
That’s come out awesome!
@bunkerTools4 жыл бұрын
Thank you very much dude!
@nanuq833 жыл бұрын
This is my introduction to your channel and I immediately subscribed after seeing the end results! Mesmerizing. Beautiful. Handsome. A work of art. I love, not only, the thickness of the piece but how every piece of wood brings out the beauty in every other piece. 😀
@bunkerTools3 жыл бұрын
Thank you very much for your beautiful comment!!
@tabletopbastler12883 жыл бұрын
Wow .. 1Mill views! Congrats. I watched it because I wanted to see the Parkside Lathe in action on such a big piece and the quality one can produce with it. Thank you, great video.
@thedimreaper16843 жыл бұрын
It can't be that easy!!!! Proper craftsman.
@bunkerTools3 жыл бұрын
Thank you very much, nice comment for my motivation.
@flyc33 жыл бұрын
Stunningly beautiful. Stunningly simple.
@bunkerTools3 жыл бұрын
Thank you very much!!
@simonjfear3 жыл бұрын
Parkside lathe never seen one of those before. Nice
@bunkerTools3 жыл бұрын
Thanks for your comment dude👍👍👍
@badgerbhoy95343 жыл бұрын
The skill on show here is staggering 👍
@bunkerTools3 жыл бұрын
I'm glad you liked it. Thank you very much for your comment! 👍
@andreas_aroditis4 жыл бұрын
Looks great! 🤩
@bunkerTools4 жыл бұрын
Im glad you like it! thank you
@timberworking4 жыл бұрын
Epic video! I really enjoyed watching!
@bunkerTools4 жыл бұрын
Thank you very much! i'm glad to red this 👍
@techknowhow48023 жыл бұрын
That is awesome. I will have to try that with some pallets. Amazing. Thank you. ☺
@bunkerTools3 жыл бұрын
Thanks for your comment, I'm glad you like it!!
@kobiekaasjager48224 жыл бұрын
I would like to clear something up, I am not a dude, I am a 73 year old lady who is crazy about wood turning. I live in South Africa and I am so glad that I discovered KZbin and wood turning.
@tpobrienjr4 жыл бұрын
Nice work, Lady. You are lucky to have access to the many beautiful woods or Africa.
@bunkerTools4 жыл бұрын
I'm sorry for the confusion. Glad to have you here! Cheers from Barcelona
@andyn62664 жыл бұрын
Kobie. Does that make you a Dudette?👍
@Markcox86 Жыл бұрын
Ese Bunkerrr!!! estas a topeee!!
@broproful3 жыл бұрын
Brilliant work!
@bunkerTools3 жыл бұрын
Thank you!
@ricarcass3 жыл бұрын
Great work, thanks for inspiring!
@bunkerTools3 жыл бұрын
Thanks to you!
@laurarosesheppard3 жыл бұрын
Love this! Thank you for a great idea.
@bunkerTools3 жыл бұрын
Thanks to you for value it!👍
@AllenOxendine4 жыл бұрын
Nice Piece, thanks for sharing
@bunkerTools4 жыл бұрын
Thank you very much dude. You are welcome
@lorenagaona29064 жыл бұрын
Me encanta!! Que chulo! Un must en cualquier escritorio
@bunkerTools4 жыл бұрын
It is for you my princess ❤️
@eduardocabuling6223 жыл бұрын
wow, ang galing!
@BlackWoodFilmmakers4 жыл бұрын
He visto bastantes vídeos hablando de la mala calidad de la maquina, y me encuentro con tu canal y resulta que la gente espera mucho mas de una para iniciarse además sin saber usarla y encima le sacas un gran partido! bravo!
@bunkerTools4 жыл бұрын
Muchas gracias por tu comentario!! Es tal como dices, mucha gente lo valora negativamente debido a su inexperiencia. Evidentemente es un torno de bajísima calidad, pero también tiene un bajisimo precio. Para aprender incluso para algo más, me parece muy buena opción. Saludos!!
@kellybarr65763 жыл бұрын
Wow. Thats a lot of work. Great job
@bunkerTools3 жыл бұрын
Thank you!!
@Bricoleando4 жыл бұрын
Veras tu como al final me enganchas al torno. Te ha quedado de lujo compañero. Buen trabajo. Un abrazo.
@bunkerTools4 жыл бұрын
Muchas gracias compañero. Sería un placer verte tornear. Anímate, no te arrepentirás. Por cierto, hecho en falta ver un buen vídeo de los tuyos, espero verlo pronto. Un abrazo.
@Bricoleando4 жыл бұрын
Yo también quiero terminar un proyecto que tengo por la mitad. Haber si acaba toda esta mierda de virus y se puede salir sin problemas. Un saludo.
@hansdegroot85494 жыл бұрын
I'm new to your channel. You did a great job. Thanks for sharing the video. I'm going to watch more of your videos. I especially like that you have a lot of Parkside tools. So do I. Not a lathe yet, though. Maybe in the (near?) future.
@bunkerTools4 жыл бұрын
Thank you very much for being here and your positive comment! 👍
@estepwooddesigns64203 жыл бұрын
Wow great job
@stepbackandthink3 жыл бұрын
It's amazing what you can do with a really expensive piece of hardwood and some scraps.
@bunkerTools3 жыл бұрын
Thank you! but it was not an expensive wood, it was an scrap of jatoba from a carpentery
@enricotringali69532 ай бұрын
Buonasera bravissimo un capolavoro.ce tanta pazienza bellissimo video grazie mille 😘😘
@danielcranston3753 жыл бұрын
Beautiful!!!
@theduftmeister3 жыл бұрын
It's a shame you didn't fill the holes on the base at the end, but..... that is a really really good end result, especially just using very entry level tools and not working from some big expensive workshop with ££££s worth of equipment. Bravo Bunkertools. Bravo. 👏👏
@bunkerTools3 жыл бұрын
Thank you very much, I am glad that you value that this is make with ''basic'' tools
@BricoglobalToledo4 жыл бұрын
Muy original y chulo te ha quedado. Un Saludo 👍
@bunkerTools4 жыл бұрын
Muchas gracias compañero! Un saludo
@verlonbowden9113 жыл бұрын
Thank you for your video it was awesome and I enjoyed watching it and your vase was very cool. God Bless
@bunkerTools3 жыл бұрын
Thank you very much!!!
@shastastan19353 жыл бұрын
Very creative! I'm not as sure handed as you so I use a drill chuck in my tail stock to hold forstner and other bits.
@bunkerTools3 жыл бұрын
Thank you!!
@calumbeaton98582 жыл бұрын
This is fantastic, I ha have just for a Parkside Wood lathe and would be delighted if I could get the same quality of workmanship.
@DJVoyagerXue2 жыл бұрын
You can do this on your lathe
@salahgabra28353 жыл бұрын
I really enjoy it every step.. Just cool man Please more
@bunkerTools3 жыл бұрын
Thank you very much!!
@hunnyhillbees3 жыл бұрын
Lovely work - inspiring video - thank you
@bunkerTools3 жыл бұрын
Thanks to you!!!
@Nopepee4164 жыл бұрын
Muy buena crack! Nos vemos pronto🔝💡
@bunkerTools4 жыл бұрын
Gracias Joel! Ya te digo si nos vemos pronto.. 😅😅
@paulorth22513 жыл бұрын
Nicely done sir very nicely done indeed.
@bunkerTools3 жыл бұрын
Thank you very much!
@bubbleblonde96003 жыл бұрын
One man's trash (old pallets), is another man's treasure (wood holder) ! 🎁
@bunkerTools3 жыл бұрын
Absolutely! 👍👍
@TheJpjames4 жыл бұрын
It's really fantastic. Crafty hands.
@bunkerTools4 жыл бұрын
Thank you very much!!👋👋
@chucklambooy84573 жыл бұрын
Fabulous work!!
@bunkerTools3 жыл бұрын
Thank you!!
@JoelWetzel4 жыл бұрын
Your thumbnail took a second to register with me; at first I saw books on a shelf. That triggered the image of a room with shelves filled with blocks of wood rather than books.
@bunkerTools4 жыл бұрын
hahahaha. Really interesting comment. The thumbnail is very important on youtube, i like to know you like it. I supose you also watched the video, so thanks for watching 😉
@woodworkfrance50483 жыл бұрын
Hi
@DCraftersCorner3 жыл бұрын
Wow, beautiful idea.
@bunkerTools3 жыл бұрын
Thank you very much
@DCraftersCorner3 жыл бұрын
@@bunkerTools Welcome 😀
@yeehaw40923 жыл бұрын
bro. this is my first video of yours that i watched, and that hot iron stamping?????? soooo nice!!! took me by surprise but i LOVE it. superb stuff
@bunkerTools3 жыл бұрын
Thank you very much dude. The iron stamp is from omellagrabados.com/en/home/
@woodworkfrance50483 жыл бұрын
Really
@heathrock763 жыл бұрын
Beautiful piece
@bunkerTools3 жыл бұрын
Thank you
@robabnawaz3 жыл бұрын
Unique ! I love it
@bunkerTools3 жыл бұрын
Thank you!!
@franciscolopezjimenez14064 жыл бұрын
Pedazo de vídeo. Gran trabajo. Un saludo.
@bunkerTools4 жыл бұрын
Muchísimas gracias, me alegra mucho que te guste. Un saludo.
@edwinleach74013 жыл бұрын
It is dangerous to not cut off the corners to take the sharp edges sticking out there. It increases the chances of it flying apart. It is also dangerous to do what you did without a tail stock to put pressure on the right side. This increases stability. Given the size of the piece, even if it flew apart it may not cause much damage. I'm talking from experience. I had a piece fly apart and I totally did not expect it. It hit me in the face. What saved me? I had a dust mask that was heavy material and a face shield. It hurt a bit but there was no blood. The piece you made did turn out great. It is very beautiful. Thanks for sharing. Hope this is helpful.
@bunkerTools3 жыл бұрын
Thank you very much friend, I am glad that you liked the piece. Any information to help is welcome, thank you!
@aaronmattison72653 жыл бұрын
I have had this happen but the piece flew into my chest. No blood and I was wearing a thick apron, however it left a good bruise. I guess I usually have to learn the hard way!
@edwinleach74013 жыл бұрын
That's why it is called an accident. We all learn by doing the work we love.
@arnomrnym63293 жыл бұрын
Nice work! 👍😎
@bunkerTools3 жыл бұрын
Thank you!! 👍👍
@sp.ghidansp94344 жыл бұрын
That was a beautiful work . And the end was so emotional touch 🌹🌷😄 . Best regards from Iraq
@bunkerTools4 жыл бұрын
Thank you very much!! 😊 I'm glad you like it!! The end also liked to my princess 😁. Best regards from Barcelona
@sp.ghidansp94344 жыл бұрын
@@bunkerTools Best regards to you and to all of Barcelona people . I hope all the World Recovery Soon ☺🌷🌹
@GPDIY3 жыл бұрын
That is absulotely epic!
@bunkerTools3 жыл бұрын
Thank you!!
@urban57163 жыл бұрын
Потрясающая работа! Очень понравилось!
@bunkerTools3 жыл бұрын
Большое спасибо!
@ritalowrie12963 жыл бұрын
Beautiful 👏👏👏
@bunkerTools3 жыл бұрын
Thank you!!
@woodworkfrance50483 жыл бұрын
Really good job bro thanks
@taylorstarcevic10153 жыл бұрын
Great video. Just a little tip for everybody, you only need to glue one side of the joining pieces. Or else you'll have a lot more excess glue to deal with
@youtukang3 жыл бұрын
👍🤝🤝
@bunkerTools3 жыл бұрын
Thanks for your comment, I wanted to make sure that the union was strong, the pine absorbs a lot.
@jtc19473 жыл бұрын
GREAT WORK!
@bunkerTools3 жыл бұрын
Thank you!!
@tedmulthauf38673 жыл бұрын
Subscribed! Based only on you being the first KZbinr to know how to properly apply glue.
@bunkerTools3 жыл бұрын
Thank you very much 👍👍
@ferarrcer3 жыл бұрын
Precioso!! Buen trabajo y gracias
@bunkerTools3 жыл бұрын
Me alegra que te guste, y gracias a ti!
@djmjr773 жыл бұрын
Very nice!! Not that it has to be perfectly round, but why after all of the lathe work did it still look wobbly when spinning? Is that just the lathe? Or what would cause that?
@bunkerTools3 жыл бұрын
Thank you! I think this is because of the lathe. Fortunately I got a real lathe.
@ericevans95073 жыл бұрын
Bunker tools. I love you. I don’t know why using my bench vice for a lathe glue up never occurred to me. Thanks for the idea. Simple genius. I must be the worlds biggest idiot.
@ericevans95073 жыл бұрын
Also, beautiful piece. It’s always interesting to see how differently people approach a piece when turning.
@bunkerTools3 жыл бұрын
Thank you very much for your comment, I'm glad a lot to be useful. We all have things to learn
@theoquasi3 жыл бұрын
Awesome!
@bunkerTools3 жыл бұрын
Thank you very much!
@keithg37003 жыл бұрын
Great job 👏
@bunkerTools3 жыл бұрын
Thank you!!
@stoff49634 жыл бұрын
Nice bro 👍🇬🇧
@MichaelSmith-nk4yq4 жыл бұрын
Wonderful 👍🏾👍🏾
@bunkerTools4 жыл бұрын
Thank you! 👍👍
@Jurraqueando4 жыл бұрын
Bua que guapa esa conbinacion de colores y vetas muy muy chulo si señor, un saludo
@bunkerTools4 жыл бұрын
Muchas gracias compañero, la verdad que ha quedado chulo, el trabajo con el torno es muy agradecido. Me alegra que te guste! Un saludo
@brendajohnson94603 жыл бұрын
Beautiful.
@bunkerTools3 жыл бұрын
Thank you!
@williamdavies62413 жыл бұрын
Man , this piece of work is beautiful, massive respect...
@bunkerTools3 жыл бұрын
Thank you very much!!! I'm glad you like it!
@carolriley84724 жыл бұрын
Very nice!
@bunkerTools4 жыл бұрын
Thank you very much!!
@torresroger263 жыл бұрын
Fantastic video
@bunkerTools3 жыл бұрын
Thank you very much!!
@Andre-pe9mm4 жыл бұрын
Love it subscribed
@bunkerTools4 жыл бұрын
Thank you very much. Welcome!🤠
@JAVIER-iv6kw4 жыл бұрын
Mu chulo, esa combinación de maderas de palet y Jatoba queda muy elegante. Felicidades. Aceptas encargos??
@bunkerTools4 жыл бұрын
Muchas gracias! Si, acepto encargos. Contacto por Instagram. Saludos
@MRcustomcrafts4 жыл бұрын
Muy guapo, eso le llamo yo torneando todo lo que pillo por el taller.. donde consigues el logo que marcas en la madera?..es chuuuulo!
@bunkerTools4 жыл бұрын
Gracias compañero! básicamente si, aprovechando materiales.. 😁 Busco la web y te lo paso!
@MRcustomcrafts4 жыл бұрын
@@bunkerTools 😅👌
@maderasdevivir40554 жыл бұрын
Buen trabajo! Una pregunta, el útil con lo que lo sujetas te viene con ese torno o lo pillaste tu aparte?
@bunkerTools4 жыл бұрын
Muchas gracias amigo! Ese plato ya viene con el torno. Saludos!