Tutorial How To Install Android Multimedia 9 inch Peugeot 508 2011 - 2018 - compatible with JBL

This is the complete tutorial showing you step by step how to install an Android multimedia unit in Peugeot 508 years 2011 - 2017, for SMEG and RT6 multimedia systems. Android Auto. Apple Carplay. Compatible with JBL Sound System from Peugeot 508.
👉 Links:
➢ Peugeot 508 Android Car Radio Multimedia 9'', 10.33'' EU Store (tested): s.click.aliexpress.com/e/_Dci...
➢ Peugeot 508 Android Car Radio Multimedia 9''', 10.33'' China Store (tested): s.click.aliexpress.com/e/_DmQ...
➢ Peugeot 508 (Citroen DS5) Android Car Radio Multimedia like original one 7''' China Store (not tested): s.click.aliexpress.com/e/_DEv...
- Android unit for Peugeot 508, 10.33 inch, 11.5 inch, 13.1 inch screen: s.click.aliexpress.com/e/_DCU...
➢ Fakra C type for original GPS antenna: s.click.aliexpress.com/e/_DCL...
➢ FM Aerial Dual Antenna Signal Booster: s.click.aliexpress.com/e/_DeO...
➢ 16 Pin Android Car Stereo Cable Extension 60cm for Android Player: s.click.aliexpress.com/e/_DES...
➢ Professional Car Door Trim, Radio Removal Tools: s.click.aliexpress.com/e/_99ishN
➢ Cordless Electric Drill Grinder Dremel: s.click.aliexpress.com/e/_DmZ...
➢ Torx T20: s.click.aliexpress.com/e/_APlYFZ
➢ Canbus Settings for JBL sound system: diyrepairs4car.blogspot.com/2...
▶️ Tutorial Instal Carplay & Android Auto Module - Peugeot 508 SMEG Multimedia: • How To Install Carplay...
☕🍵 If this video tutorial was helpful to you, you can press the "Thanks" button to buy me a coffee 😊
Comment, Thumbs up, Share, and Subscribe!
- Factory menu Password: 8888
👉 SMEG / SMEG+ pinout to connect at original car microphone (down in page): diyrepairs4car.blogspot.com/2...
Cum sa instalezi Android in Peugeot 508
Microphone, Wifi Function, Support Steering Wheel Control, Support 4G Network, Support CanBus Hiworld Peugeot, Canbus Raise Peugeot,
Built-in GPS , MP3 Players, Voice Control, DSP, Carplay, Android Auto, Reversing Input, Split Screen, OBD, Octa Core, Radio FM RDS, KZbin, Netflix, Spotify
Hizpo S1, Hizpo S2, Hizpo S5, Hizpo S6, Hizpo S7, Hizpo S8, 4 GB RAM, 6 GB RAM, 8 GB RAM
Android 12, 9 inch / 10.33inch Display Screen, Quad Core 1.2GHZ ( Eight core UIS 7862A 1.8Ghz / UIS 7862S 2.0Hhz optional)+ DDR3 1GB Flash (2GB/3GB/4GB/6GB/8GB optional) + 16 GB Memory (32GB/64GB/128GB ), WIFI, Hotspot, ( 4G Network Inyternet Data SIM, Mirror link, Steering Wheel Control, RDS + DSP,

[@AdrianDragan]

👉 Links: ➢ Peugeot 508 Android Car Radio Multimedia 9'', 10.33'' EU Store (tested): s.click.aliexpress.com/e/_DcihEs5 ➢ Peugeot 508 Android Car Radio Multimedia 9''' China Store (not tested): s.click.aliexpress.com/e/_DeHfd7f ➢ Peugeot 508 Android Car Radio Multimedia like original one 7''' China Store (not tested): s.click.aliexpress.com/e/_DEd0xAd ➢ Fakra C type for original GPS antenna: s.click.aliexpress.com/e/_DCLMpQ9 ➢ FM Aerial Dual Antenna Signal Booster: s.click.aliexpress.com/e/_DeO1N8h ➢ 16 Pin Android Car Stereo Cable Extension 60cm for Android Player: s.click.aliexpress.com/e/_DES6SPF ➢ Professional Car Door Trim, Radio Removal Tools: s.click.aliexpress.com/e/_99ishN ➢ Cordless Electric Drill Grinder Dremel: s.click.aliexpress.com/e/_DmZXf4t ➢ Torx T20: s.click.aliexpress.com/e/_APlYFZ

[@jclans]

Bedankt

[@AdrianDragan]

I'm glad I was of help to you. Thank you!

[@IvanIvanov-vv4bg]

Is it possible to insert back the original plastic, shiny, aluminium like edge from the original dashboard vents to the newly shipped vents? I can see the new ones comes without the aluminium like edge.

[@AdrianDragan]

Hello. Can't install those shiny trims on the new frame.

[@spawnsworth]

HI Adrian. Great vid thank you for your great work! I could not work out which plugs I need to connect to the Peugeot outlet (the large square plug that was disconnected from the old multumedia unit). I am kind of stuck now and this is the last bit of info I need! Thank you!

[@AdrianDragan]

Hello. It's true, I didn't show the exact moment when I connected the large plug from Android to the original large plug. This is the cable with the large plug that connects to the Android unit (see minute 1:06 ).

[@spawnsworth]

@@AdrianDragan Thanks for the quick reply! I wasn't sure if that was the right connector as it looks different from the Peugeot socket but I will have another go at it in the next day or 2 as I must have done something wrong!

[@BenjiLucas03]

hi, would you recommend the S5 more than the S4 even if I don’t care about the 4G sim slot? (S5 has slightly better processor and 64G instead of 32G, etc)

[@AdrianDragan]

Hello. I prefer the S5 because it has a better processor, in tasks like Waze or Maps it will do better.

[@robertkelm6077]

What about the rear camera? My 16 model has a rear camer an parking sensors front/rear. Would it work with?

[@AdrianDragan]

Hello. The original car camera will be displayed on the Android screen. At minute 14:05 I talk about connecting the cables if your car has a camera from the factory.

[@jord6477]

Would love to see how to install the after market reversing camera because I did not get it to work at all..

[@AdrianDragan]

Hello. I hope that in the coming months I will have the opportunity to make a video on how to install the reversing camera.

[@andrealomanto1525]

I also found a kind of small speaker that must be connected to 2 purple wires on the cambus via a black plug. What purpose can it serve? Maybe for voice commands and where should it be placed? Thanks if you can help me

[@AdrianDragan]

Hi. That little speaker is for playing the warning sounds of the parking sensors.

[@pedrogandra4661]

My 508sw 2013 has rear parking sensors. Will they work automatically when I change the gear to "R"? Also if I install a rear camera will it work when I change gear to "R"? Thank you!

[@AdrianDragan]

Hello. The answer is yes, it will display the parking sensors (see at minute 30:26 ) when you put it into reverse and if you install a reversing camera it will display the image on the screen.

[@gc5371]

Thanks

[@AdrianDragan]

Many thanks!

[@Headingmashine1]

Great guide how to do it by yourself. What do you have to say about this unit quality? Did you had some problems in the past months? Also, can you turn it on or off on car console button? Also, if i understood, you kept original usb connectors and got extra 2 in glove box?

[@AdrianDragan]

Hello. The Android unit works very well even after these months of use. The unit starts only if the ignition is on, by pressing the rotary button on the steering wheel you mute the audio system. Yes, it is an adapter cable to use the USB plug on the old multimedia system, see at 1:23 minute .

[@Headingmashine1]

@@AdrianDragan aaa, ok. Btw, are you interested to make a guide how to remove ashtray in that 508? I didn't found any video, or manual instructions on the internet, and i must pull it out, and clean the mechanism that keeps cover closed, because it is spilled with the juice.

[@omnicrom1]

Salut Adrian. Poti sa-mi spui te rog daca tableta recunoaste si senzorii fata + head up display'ul si snzorii de unghi mort. Multumesc !

[@AdrianDragan]

Salutare! Senzorii din fata cu siguranta ii recunoaște, cât despre senzorii de unghi mort cred ca ai ceva setari. La capitolul HUD, tableta nu va transmite date despre navigatie către acesta sau cel puțin eu nu am testat suficient.

[@gc5371]

Hi Adrian! Congratulations for your channel. I recently had installed a similar device from Mekede m6pro on my 508 2013 with RNEG2. Unfortunately after installation, I lost the function of the rear windows. All other settings are working I've contacted the manufacturer but useless so far. The can bus decoder is shown as unknown in the device status ordered a new set of cables and cambus and the same result am quite disappointed so far.

[@AdrianDragan]

Hello. I don't really understand why it doesn't work anymore, the rear windows don't go up and down anymore?

[@gc5371]

No also went to my mechanic to check it, and on the tester is showing that has no rear window function anymore and he told me that Peugeot has some functions that are passing through the original head unit. Also as is not recognising the canbus can be the problem too. I might just end getting same head unit as you installed

[@Rafal-tb1fi]

Hi Adrian, do I need to buy additional equipment if I don't currently have Android Auto for this to work?

[@AdrianDragan]

Hello. In the package you get everything you need, except for the dremel that I used to remove the air vents and move them to the new frame.

[@gabrielbacanu6814]

Salut Adrian! Felicitari, foarte tare tutorialul! Detin un 508 sw 2.0 HDI din 04.2013 cu RT6, poti sa-mi confirmi ca este compatibil modelul de tableta prezentat de tine cu echiparea prezenta pe masina mea? Multumesc!

[@AdrianDragan]

Salutare! Da, aceasta tableta este compatibila și cu navigatia originala RT6.

[@gabrielbacanu6814]

Multumesc pentru raspuns. Intre timp mi-am comandat si eu un model S6 din link-ul tau, la un pret la care nu se apropie nimic din ce gasesti in Romania cu specificatii asemanatoare (946 lei). Ramane sa gasesc cablurile. Au livrare foarte tarzie, pe la sfarsitul lui mai. Trebuie sa mai caut. In orice caz, dupa ce vine, in cazul in care ma impotmolesc, o sa-mi permit sa te mai deranjez cu intrebari. Multumesc!

[@AdrianDragan]

@@gabrielbacanu6814 Ne auzim daca este cazul. Mie cablul de extensie mi-a venit in 4 saptamani.

[@cosminmuntean4568]

Danke!

[@AdrianDragan]

Thank you very much for your coffee!

[@dominikpfeifer2474]

Do you still have all of the options to regulate air conditioning. Like the one for the front window, back window ….

[@AdrianDragan]

Hello. Yes, with this Android unit you have all the options for climate control.

[@Vene.Ziga-90]

Does buttons at the arm rest works?

[@AdrianDragan]

Hi. Yes, it should work.

[@tdqr]

Salut! Ai putea să faci un video despre cum se trece de la RT6 la NAC?

[@AdrianDragan]

Salut. Daca se va ivi ocazia voi face :)

[@michastr2553]

Do you get sound through all the speakers after the swap (especially rear doors speakers)?

[@AdrianDragan]

Hello. Of course you have sound on all speakers if you use this Android unit.

[@michastr2553]

@@AdrianDragan Thank you for your reply. I read somwhere that somebody had a problem with rear speakers on one of the android units. Did you have a chance to test if the CarPlay works via USB? On the Aliexpress page(in the description) it says that the CarPlay is wireless only, but in 29:46 of your tutorial we can see it says “USB or Bluetooth” while showing CarPlay on the display.

[@AdrianDragan]

@@michastr2553 Hello. Yes, you can connect the phone via cable to the USB port of the Android unit and the phone will charge, the Android Auto or Carplay will also work.

[@janek3510]

This is 8gb version or 4? It have wifi? Its easy to connect to phone? Ones you connect to phone it remebers your phone and you just turn on hotspot and it automatically connect?

[@AdrianDragan]

Hello. The version tested in the video is the 4Gb version, the most powerful one is 8Gb, but 4Gb it also works well. This 4Gb version (S5) has WiFi and 4G connection for mobile internet with data card. It is very simple to connect it to the phone, once the connection is made it will be remembered and the next time you enter the car it will automatically connect to the last connected phone.

[@user-lv4yo5cc6n]

hi, can you tell me about the car Peugeot 407 2.0 HDI in winter at -10 -15 you need to turn the starter for a long time for 30 seconds to start after the car has been idle for 8-10 hours glow plugs new battery also runs smoothly the engine thanks

[@AdrianDragan]

Hello. Have you checked if the glow plug relay is working properly?

[@user-lv4yo5cc6n]

@@AdrianDragan not sure but I think so you will need to check with the service Maybe there is an air leak somewhere, can you tell me the weak points that need to be paid attention to? thanks for the answer I'll leave 2 videos of a cold start at -15 -20 degrees kzbin.info6Iv0Avl-uJA kzbin.info86hVaW-ua_U?feature=share

[@AdrianDragan]

@@user-lv4yo5cc6n Hello. I think you have to drive the car to the service for a thorough check.

[@user-lv4yo5cc6n]

@@AdrianDraganok Thank you

[@user-wu2mc2mz2g]

Hello, will this work with the hybrid model 508 RXH?

[@AdrianDragan]

Hello. I have not tested the Android tablet in the 508 Hybrid, but I have seen Hybrid 508 owners who have installed an Android unit and they say it works well. However, I would say that a more suitable upgrade would be an Android Auto / Carplay module to keep the original multimedia unit for your Hybrid car, I think that maybe you have some settings there that will not be found in the Android unit: - Tutorial: kzbin.info/www/bejne/omLRgpanZ9yXf6M - Link for module: s.click.aliexpress.com/e/_DBaqMWx

[@BiggyZiggy5]

Hello, have you tried the 10 inch version? I think it will be too big?

[@AdrianDragan]

Hello. I haven't tried the 10-inch version, but it will definitely cover the air vents a bit more.

[@SergioPichierri79]

Hi, You must connect the old head unit back to make it work or you can remove it? thank you

[@AdrianDragan]

Hello. If you connect the Android unit, you have no way to connect the original multimedia unit.

[@AdrianDragan]

Watch the clip, I think I explained all the steps pretty well.

[@dgrfos]

Is this unit supports the original cd player???Thanks!!!

[@AdrianDragan]

Hello. You can no longer use the CD drive if you install the Android tablet. But why would you still use the CD drive when you have all Android universe? 😁

[@pedrogandra4661]

Can you please add the link to the canbus decoder, or is it included in the multimedia unit link? Thank you!

[@AdrianDragan]

Hello. The canbus decoder it is included with Android tablet and all the cables you need to install. The only cable need to buy it is the extender.

[@user-cw5bo1vw4s]

​@@AdrianDraganCan I please provide a link to the Extension Cord?

[@AdrianDragan]

Hi. Power cable extender: s.click.aliexpress.com/e/_DES6SPF

[@steveingers531]

Anywhere else sell the extension cable? eBay Amazon? Preferably in the UK and not showing china?

[@qwertt-tg8rd]

Can you make a video how to install it on Mazda CX3 ?

[@AdrianDragan]

Hello. I'm sorry, but I don't have a Mazda CX3.

[@cosmiiin_689]

Salut,am un peugeot 508 1.6thp din 2012 am o problema cand o pornesc cresc turatiile si dardaie putin motoru care ar fi problema? Multumesc

[@AdrianDragan]

Salut! Cel mai bine ar fi sa mergi la un service care are tester dedicat Peugeot (DiagBox).

[@andrascosmin5510]

Salut adrian as dori si eu un astfel de carplay.ami poti spune ce marca este.multumesc

[@AdrianDragan]

Salut! Eu am cumparat de pe Aliexpress cu livrare din Polonia in 7 zile. Iata link-ul de unde am cumparat (vesriunea S5): s.click.aliexpress.com/e/_DmkXJCz

[@transporter06csf]

Very good video ... thank you. I don't understand why in 2024 they can't make the sensor BEEP come from the relevant speaker like with the original unit. The canbus beep feels very cheap.

[@BenjiLucas03]

have you found a solution for this?

[@transporter06csf]

@@BenjiLucas03 Unfortunately no Same stupid beep

[@AdrianDragan]

Hello. Put the canbus settings on HIGH, see if it works with that: blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgJmxRWaCPgkxTgrTm-rUrMmHuSLdrgs9kYlSAfqlpMcAOnrKBiD6B3EYONAgPIbSRz2waSn8Qh2J3XBArLi7_BrkCk7pCqXxrl-dAWkUh87b33t6LXyNlH3qbWM7_cHYNescoPBgG3SI_o5Wcfq7tbRurS9RNhovTjc3SeByTJBd2N5SUmWNDQx9xFyl8/s1920/Tumbn.00_01_00_16.Still004.jpg

[@transporter06csf]

@@AdrianDragan You lose the ability to control the original orange screen. Will see if it makes a difference with the sensor sound

[@AdrianDragan]

But what car do you have?

[@ionutlazar1228]

Pentru sistemul JBL se aude la fel de bine?

[@AdrianDragan]

Salutare! Din pacate nu am testat pe masini care au sistem JBL din fabrica.

[@traqnivanov9275]

The temperature from the car's sensor?

[@AdrianDragan]

Hi. It shows you the temperature outside. You can see in my video at minutes 25:55

[@BeneNelutu1979]

Salut! Ai putea te rog să Îmi recomanzi dacă se poate o mufă adaptoare, pentru că am schimbat casetofonul pe mașină și aș vrea să îmi funcționeze si comenzile de lângă volan. Mulțumesc anticipat! Mașina este Peugeot 307SW 1,6 HDI 110 cai

[@AdrianDragan]

Salut! Ce casetofon ai pus? Din ce an este masina? Ce model de casetofon ai avut?

[@BeneNelutu1979]

​​​@@AdrianDraganMașina este din 2004 și am avut pe ea un radio cd Sony dar nu mai știu modelul dar l-am schimbat pentru că s-a defectat și am pus tot un Sony model DSX-A410BT am mai văzut că nu am mufa originala de la mașină. Sunt două mufe probabil a schimbat mufele nu știu. Aș trimite o imagine cu mufele dar nu pot aici

[@lewispaslek]

Is it possible to turn on and off the blind spot sensors in the side mirrors?

[@AdrianDragan]

Hello. The car I installed the unit on did not have this function and I did not look for it, but it is certainly in the menu of the Android unit.

[@amenajariinterioarebraila]

Salutare, se poate regla volumul la senzorii de parcare 508? Mulțumesc

[@AdrianDragan]

Salut! Din ce stiu poti sa opresti total semnalele sonore, dar nu poti regla volumul.

[@LaurentiuL88]

nu poti regla...doar sa le oprești..apai nu face tare😊

[@amenajariinterioarebraila]

@@LaurentiuL88 La un 508 clientul vrea sa audă mai tare respectivul bip. Am rezolvat atunci era de la unitatea radio. Am înlocuit cu alta sh și este ok. Inițializată normal 👍 Mulțumesc de interventie

[@afilippi2a]

Hello Adrian thanks for the video. I ve installed the android radio on my 2011 Peugeot 508 with RT6. The radio is working fine to the exception of the sound. No sound at all. And I cannot receive FM radio (I have used the 2 connectors amplifier from your link) nor the external mic. I think it comes from a bad connection as in the video you refer to a cable that is not clear to me. Could you help me? Thanks. Alexandre

[@AdrianDragan]

Hello. Does your car have a JBL audio system from the factory? If so, follow my advice here: diyrepairs4car.blogspot.com/2024/02/peugeot-508-android-unit-canbus-setting.html P.S. Now I understand that it is about FM Radio reception. Do you live far from the city? Normally you should have radio reception. Do you use an antenna adapter with an amplifier? Did you connect the FM antenna amplifier wire to the wire in the android unit that says ANT?

[@afilippi2a]

Hello non JBL only standard audio unit

[@AdrianDragan]

@@afilippi2a Now I understand that it is about FM Radio reception. Do you live far from the city? Normally you should have radio reception. Do you use an antenna adapter with an amplifier? Did you connect the FM antenna amplifier wire to the wire in the android unit that says ANT?

[@afilippi2a]

​@@AdrianDragan In fact, I have no sound at all (bluetooth, sample sound / video) and I have no FM reception. I've used the 2 wire amplifier linked in your original message. With the original RT6 set I had no issue with FM reception. In your video, at 15:05, you talk about connecting wire for the antenna. But this part is not clear for me. Maybe I've missed something here. Thanks again for your help higly appreciated

[@AdrianDragan]

@@afilippi2a I understand that the problem is that the android unit does not make any sound through the speakers regardless of the sound source, correct? That red wire is from the FM radio amplifier and connects to the blue ANT wire to supply 12 volts to the FM radio amplifier.

[@yeryi1982]

Buenas tengo el s4 y queria recuperar el micrófono original del coche, se podría hacer? Y si es asi me podrías indicar como se haria? Muchas gracias

[@AdrianDragan]

Hola. En teoría es posible, pero aún no lo he probado. Tienes que hacer una conexión desde los cables del micrófono original en el jack de la radio a ese jack donde va el micrófono de la unidad Android. En el futuro haré un tutorial sobre esto. diyrepairs4car.blogspot.com/2023/02/smeg-pinout-radio-peugeot-citroen.html

[@yeryi1982]

@@AdrianDragan muchas gracias lo probaré y si funciona os comento.

[@pieterbaasje]

Great tutorial, thank you !! Question: is there any way to use the microphone from the original RT6 installation in my 2014 508 ?

[@AdrianDragan]

Hello. Yes, it is possible to use the original microphone on the Android unit, it's just that it's hard for me to explain. In the future I will make a video tutorial about how to connect the original microphone to the Android unit.

[@pieterbaasje]

@@AdrianDragan Thanks for your reply, Adrian. I hope you will do it before I install my Android unit.😄

[@pieterbaasje]

@@AdrianDragan After doing some research, my understanding is now that on the 508 I 2014 with the standard RT6 headunit, the Peugeot telematic module (to which the original microphone is also connected) is responsible for interfacing Bluetooth with the mobile phone, routing only output audio to the RT6. So the way to do this with an Android headunit would be to simply connect the telematic output to an input un the Android unit ?

[@AdrianDragan]

@@pieterbaasje Hello. In about 3-4 weeks I will install an Android unit instead of an RT6 and then I will tell you exactly how it works. I will make a tutorial about it.

[@cosminmuntean4568]

@adriandragan, am montat același tip de radio ca al tău și nu îmi funcționează sunetul, ce ar putea fi?

[@AdrianDragan]

Salutare! Masina ta are sistem de sunet JBL din fabrica? Daca da, la setarile canbus trebuie sa setezi: "High" asa cum vezi in imaginea din urmatorul link: diyrepairs4car.blogspot.com/2024/02/peugeot-508-android-unit-canbus-setting.html

[@florentsuc4421]

buna ziua, ati gasit o solutie pentru sunet cu sistemul JBL ?

[@AdrianDragan]

Salut. Da, este necesara setarea corecta a decodorului Canbus în menu, asa cum vezi in următorul link: diyrepairs4car.blogspot.com/2024/02/peugeot-508-android-unit-canbus-setting.html

[@AdrianDragan]

Dacă nu reușiți dați-mi un mesaj pe pagina de facebook: facebook.com/profile.php?id=100082513732015

[@traqnivanov9275]

HELLO,, help if you can, parking sensors don't work for me, otherwise everything else is ok

[@AdrianDragan]

Hello. Do you have the same Android unit? If so, make the Canbus settings in the menu that you can see in the following link: diyrepairs4car.blogspot.com/2024/02/peugeot-508-android-unit-canbus-setting.html

[@ValiB-ov9gv]

Salut .imi poti spune te rog de ce nu pot regla balansul fata spate? Adica nu pot regla decat dreapta fata spate sau stanga fata spate

[@AdrianDragan]

Salut. Explica mai clar, nu se aude o boxa? Pe ecran iti arata ca face balansul pe fiecare boxa? Ma gandesc ca poate e vreo boxa ce nu functioneaza sau nu sunt conexiunile bine facute.

[@ValiB-ov9gv]

@@AdrianDragan sal .deci nu SE poate regla balansul pe fiecare boxa decat fata stanga si spate stanga impreuna sau dreapta fata si dreapta spate impreuna.mam uitat la conectica de la unitarea android si nu SE vede intervenit

[@AdrianDragan]

@@ValiB-ov9gv Nu-mi dau seama de unde vine problema.... Depinde și ce unitate este, ai luat legătura cu vanzatorul și să-i spui despre problema?

[@ValiB-ov9gv]

@@AdrianDragan masina asa am cumparato.venita din franta

[@nicoG3718]

Can anyone suggest me a system that also works with the NAV console near the handbrake?

[@AdrianDragan]

Hello. Have you installed this navigation and your controller on the center console is not working?

[@nicoG3718]

@@AdrianDragan No. I'm considering replacing the radio but I have doubts that that joystick works too. Several Chinese devices work very well except for that console.

[@AdrianDragan]

@@nicoG3718 The car on which I installed this unit did not have that knob controller near the armrest, but other users confirmed to me that it works with the Android unit in the clip.

[@florinparvan5494]

Salut.Am cumpărat o navigație Junsun și nu am sunet decât 2.3 secunde.Am amplificator JBL pe mașini.Sti ce ar trebui sa fac

[@AdrianDragan]

Salutare. Nu am experienta cu navigatiile Junsun dar la acestea de la Hizpo (instalat in video) nu am intampinat aceste probleme. Totusi, ai setat modulul canbus pe 508 / High? Ce modul canbus are unitatea Android?

[@florinparvan5494]

Mulțumesc Am reușit să o fac să meargă pe aceea Junsun.Acum a venit un prieten ci Hizpo de 10inch,am probator a mers dar când sa o montez nu mai ia comenzile prin touchscreen.Se poate sa fi activat eu ceva când am ținut mana pe ecran

[@florinparvan5494]

Nu are nici buton fizic de reset

[@MaSa-hi2tf]

​@@florinparvan5494Jak udało Ci się uruchomić dzwięk? Też mam tylko przez 2 sekundy dzwięk jak nacisnę przycisk od głośności.

[@user-js5zc5kn1y]

Я так розумію, що оригінальна камера заднього ходу і мікрофони не працюють?

[@AdrianDragan]

Привіт. Оригінальна камера працює з цим планшетом Android (автомобіль, на який я встановив планшет, не мав камери, але я встановлював її на інших Peugeot, і оригінальна камера працює), оригінальний мікрофон автомобіля не працює з планшетом Android.

[@user-js5zc5kn1y]

@@AdrianDragan дякую.

[@Urkopop]

308 9T ?? please..

[@AdrianDragan]

Hello. Look here: kzbin.info/www/bejne/nJDZaIKJYrt7qtU

[@LaurentiuL88]

il am si eu foarte bun🥰🥰🥰

[@AdrianDragan]

Bun! Sa-l folosesti cu placere!

[@HAYPATRIOT]

Здравствуй друг. У меея с системой JBL, подключил, но звук только передние, саббуфер и задние динамики не работают. Но такое ощущение, что ьам питание есть, потому что часто такой тихий грохот издает. Спасибо

[@AdrianDragan]

Привет. Какой Android-устройство вы установили на свой автомобиль? Это точно так же, как в моем видео? Если он такой же, как у меня, выставьте настройки канбус-декодера, как на изображении в моей ссылке, и посмотрите, будет ли работать система JBL.

[@HAYPATRIOT]

@@AdrianDragan да, такой же как у тебя, канбус-декодер настроил, но все равно, усилитель и задние динамики не работают

[@AdrianDragan]

@@HAYPATRIOT Я упомянул ссылку и, кажется, забыл ее вам отправить: diyrepairs4car.blogspot.com/2024/02/peugeot-508-android-unit-canbus-setting.html Если и это не поможет, проверьте штекеры и кабельные соединения с устройством Android.

[@HAYPATRIOT]

@@AdrianDragan обновил, начал работать, но не по своей мощностью, в пункте объёмный звук когда точку вставляешь на задние динамики, звук пропадает, то есть не регулироавт

[@HAYPATRIOT]

24.41

[@BEci151]

its good for long time?

[@AdrianDragan]

Hi. I have cars on which I use such Android units for more than two years and they work without any problems. It is important to choose the model with an octa core processor and at least 4 Gb RAM in order to have the best user experience.

[@BEci151]

@@AdrianDragan thanks so much your answer . The reverse cam install is difficult ?

[@AdrianDragan]

@@BEci151 Hello. It is not very difficult but it is some work. Now the weather is cold and I can't work because plastics can break. I hope that when the warm weather comes I will make a video about the installation of a reversing camera in the Peugeot 508.

[@BEci151]

@@AdrianDragan thanks so much !

[@user-js5zc5kn1y]

Привіт оригінальна камера пише немає сигналу. Підкажи щось. Дякую

[@AdrianDragan]

Привіт! Ви встановили такий пристрій Android, і коли ви вмикаєте задню передачу, він не показує зображення камери? Я думаю, що кабелі для камери заднього виду на задній панелі пристрою Android підключені неправильно. Дивіться на хвилині 14:06

[@andrascosmin5510]

Salut adrian as dori si eu un astfel de carplay.ami poti spune ce marca este.multumesc

[@AdrianDragan]

Salut! Eu am cumparat de pe Aliexpress cu livrare din Polonia in 7 zile. Iata link-ul de unde am cumparat (vesriunea S5): s.click.aliexpress.com/e/_DmkXJCz

[@andrascosmin5510]

Salut adrian as dori si eu un astfel de carplay.ami poti spune ce marca este.multumesc

[@AdrianDragan]

Salut! Eu am cumparat de pe Aliexpress cu livrare din Polonia in 7 zile. Iata link-ul de unde am cumparat (vesriunea S5): s.click.aliexpress.com/e/_DmkXJCz