Tutorial Inventor - 174 KINEMATIC vs DYNAMIC

Every tutorial brings new abilities.
You can slow the film on KZbin by using Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT - Oriunde s-ar afla în lume, vorbitorii de limba română pot cumpăra foarte ușor și la un preț mic cărțile mele în format PDF de aici: play.google.com/store/books/c...
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
You can read more about me here: grabcad.com/constantin.stance...
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!
To have access to the ASSETS offered to run this tutorial you must subscribe to membership level 2 (Jorneyman). The subscription will give you access to ALL the assets for one month, but also to get the big POSTER that contains ALL the tutorials - see details in tutorial no. 361. If you do not renew your monthly subscription, you lose access to future updates of these add-ons. Getting the assets only by subscribing to the membership is motivated by the fact that they are created in addition to simply watching the tutorial, which is free.

[@user-gi3nk5so2q]

Dear Constantin ...as ussually outstanding case. I model my mechanism and I used differnt turns (rpm) for testing mechanism trough dynamic simulation. I found that: 1. during some rpm (in my case 10 - 13 rpm) mechnism stop in position when oll three axes where in the same line ...something like " death angle", It was blocked. 2. In some rpm ( 5, 39 and 40) the mechanism moved on one side only. The first rotation was ok...the slider moved from one side to second one and that slider stay only on one half or route ...like in kinematic simulation. In the end ...it is nice case. Best Regards Jan

[@prof-stancescu]

The important fact is that you can control the mechanism as you want. You are powerful and happy to study such interesting mechanics. Congratulations!

[@davideaccorsi5637]

The trick about how to set a CONSTANT rotational velocity is GREAT. Many thanks Professor!

[@prof-stancescu]

Glad it was helpful!

[@Wolf-fs6xj]

Weltklasse vielen vielen Dank 🙏 bitte mehr von der dynamischen Simulation. Vielen Dank für ihre Zeit und ihre Mühe

[@prof-stancescu]

Danke schön!

[@arcturus77]

Mr.Stancescu, thank you so much for this awesomely clear explanation of "kinematix vs dynamix"..

[@prof-stancescu]

You're very welcome, my friend!

[@nostamine2567]

foarte misto domnu constantin . chiar m-a ajutat ,sincer !

[@prof-stancescu]

Be my guest!

[@AleksanderJBL]

Thank you for sharing this. It is helpful to see someone working with constraining an assembly, as it seems to be more complicated matter than modeling parts (in my case anyways) :)

[@prof-stancescu]

You're very welcome!

[@alexanderobika7547]

Thanks so much prof. Your videos have done so much good for me.

[@prof-stancescu]

Glad to hear that!

[@ashutoshsuthar3753]

Appreciate the details, wonderful information you are giving sir,

[@prof-stancescu]

My pleasure, my friend...

[@mohammadfarhadi4870]

Thank you so much🙏

[@prof-stancescu]

You're welcome 😊

[@xasas9324]

thank you sir, it really helps a lot. 真的很感谢

[@prof-stancescu]

谢谢哥们儿！

[@hameedetemadi8390]

Very good job thanks for training inventor

[@prof-stancescu]

So nice of you

[@hameedetemadi8390]

Veryyyyyyyyy Nice Job

[@prof-stancescu]

Thank you!

[@ronaldguerrero8831]

Thanks for the class .. We are seeing that the drive in the assembly does not give the expected movement, and when simulating it in dynamic analysis, a movement is imposed on it, the simulation is obtained. If gravity is not taken into account in the dynamic simulation, and with the imposition of constant turning movement ... the complete movement is not obtained? Can this simulation be carried out in an inventor studio?

[@prof-stancescu]

Kinematics does not deal with body mass. The dynamics take into account the inertia producing the passage over the moments of instability.

[@prof-stancescu]

You have to create the assembly and to experiment with anything you want to see what happens with the movement. I'll prepare a further tutorial with conveying the data from Dynamic Simulation to Inventor Studio. Thank you!

[@domenicofarina7978]

Is it possible to have the images of the dimensional drawings of the components of this video? I would like to design the components on inventor 2018 ... for now I make the idw from inventor 2021 but it is laborious and I have little time ... thanks

[@prof-stancescu]

Give me your e-mail address on [e-mail] and I'll send you all...

[@prof-stancescu]

Sto aspettando che tu mi invii il tuo indirizzo e-mail

[@HuongHoang-ez9si]

How can I download this file( step file or part file) for practicing? Thanks Prof

[@lamtran2993]

There is a link for the files in the video' s description.

[@HuongHoang-ez9si]

@@lamtran2993 Mình cũng đã vào link dưới nhưng lại không tải được

[@lamtran2993]

@@HuongHoang-ez9si bạn bấm vào link file muốn tải rồi chọn open link incognito window là nó sẽ tự tải cho bạn.

[@prof-stancescu]

You have the answers from your conational friends - Good luck!

[@hameedetemadi8390]

I'm from iran

[@prof-stancescu]

Welcome Iran!

[@alexeigrigore2748]

Very good! dar sa mai fost si-n romana inca mai bine! Oricum multumim!

[@prof-stancescu]

Canalul acesta se adresează studenților lumii, printre care și românilor, fiindcă folosesc un soft în limba engleză și trebuie să se acomodeze cu vocabularul specific. Mulțumesc Alex!