Tutorial! Lever-action Rubberband gun! Part 1

[@Snowy101]

I just started making this in woodwork class today. That 4mm plywood was scarce so we eventually had to machine some paneling down to 4mm and use that instead. Good video, practical design, easy to make and easty assembly 10/10.

[@Snowy101]

I also had to use wood glue to put the paper on the plywood so I'll have some extra sanding to do.

[@nifty1940]

A great project, well planned and thought out, and a generous spirit to allow free downloads. A big thank you.

[@JOHNN01.82]

I bought a gun exactly like this rubberband gun off eBay someone made it obviously from this tutorial and it's awesome, i could not of made it myself I am blown away with it i love it worth every penny

[@compulsor5853]

Simply astonishing- the level of precision and ingenuity in your work is beyond description. Thank you for sharing!!!!

[@jilliansala139]

After sighting in at 60 feet, I could easily cover 5 shots with a nickel kzbin.infoUgkxQt2uORDRfFOVSrO4idv4B90ThT6EOnEL ! Truly a pleasure to shoot! Scope was easy to adjust for eye relief. Only problem the varmints must have seen it delivered lol!Update: So impressed with shot groups at 30 yards I purchased a Hammers 3×9 with adjustable Objective scope! Now a true nail driver!

[@truckshackley373]

Just a tip; identically shaped parts (like the ones you used to build up the stock and receiver of the gun) can be stack cut. Basically, you stack however many pieces of plywood you need and temporarily attach them together with a screw in an area that will be cut off. Place your template on the top piece and saw all of them at once. Your pieces will be all the same and it saves you some time...

[@brandaeyon]

yeah, but you might want to do it only like two at a time, because if it gets too high, while your cutting it would fall, and after you cut off the piece with the screw, nothing holds onto it.

[@adempitapaje1123]

agora fala em portugues

[@BlackHawk2029]

You can also back each piece with blue painters tape, and use super glue between the tape layers to hold it together. The peel strength of blue tape is pretty weak, which is what keeps it from pulling paint up when you pull it off. But its sheer strength (horizontal) is excellent. I use this trick all the time.

[@beneditomaria9903]

@@adempitapaje1123 tu.me.vende uma.dessa

[@Dave51262]

Excellent tutorial. Thank you for making these videos and sharing your plans for free. They are some of the best I have seen. Great job and look forward to seeing more of your work.

[@mattukko]

I built this and love it. I wouldn't give it to a child. This is my treasure ;)

[@porky6551]

Super, habe mir schon eine nachgebaut. Eben auf die CNC fräse und nach 35 min sind alle teile gefräst. Der zusammenbau ist auch ganz einfach...

[@Azadanimates]

this is the best rubber band gun ive seen!

[@MrShannonluk]

your website is very good, very creative and i like it so much, thank you! Hope you can create more and the guns are actually very fun and easy with your guides and templates!!! Thanks😆😆😆

[@BonesXIII1]

Millón de gracias por convertirme en el mejor tío del mundo.Saludos desde Argentina

[@kevin-nw1is]

Hola dónde consigo los planos y que medidas es

[@pzusro]

Since I'll be retiring at a rather early age, now I know what I'll try to pull off with all that free time

[@RBguns]

I think, in english it is called aspen (populus) plywood. The colt single action army grips are cherry (american black). Dowels are European Beech.

[@Goat015]

🤯🤯😎🤩

[@Lukiepop]

Dude, this is awesome!!! Will be an ideal present for my grandad! (a western lover)

[@dtsenear]

Did you make it lol?

[@RBguns]

4mm (5/32 inch) plywood. All parts are smaller than A4 paper (210x297mm).

[@RBguns]

mainly the length of the dowels (ø4,ø6mm), the diameter of the barrel and magazine, the connection part between barrel and magazine

[@RBguns]

Hab ich auch schon dran gedacht. Kommt vielleicht noch.

[@karcsiki]

super geworden, schön professionell dargestellt und gearbeitet. Danke für die Links.

[@RBguns]

You can do it with 3mm plywood, but then you have to adjust many parts.

[@АндрейНовичёнок-л6я]

Классно сделано! Спасибо за приложенную инструкцию.

[@Name.1254]

DR. Chilli наконец нашол русского

[@ncplq]

••Буська Шоу•• 4мм

[@davidfenimore1736]

you have a nice setup for a wood shop

[@sebcv8027]

love all your videos and thank you so much for putting it free in the description👍👍👍

[@AUTgeSKIPPTshomemadeguns]

I also make cool guns, like the M16A3 with free templates, take a look on my channel.

[@RBguns]

No. I'm RBguns. I'm from Germany.

[@breemaadani]

dude thanks for free templates. Now i'm going to make this with scope

[@shannanschisler8485]

I think you can learn more about it on woodprix.

[@RBguns]

wood glue (white). takes an hour to dry.

[@paulj8775]

thanks for the construction manual ??? would you be able to make a L1A1 SLR Rifle that would be fantastic, thanks again cant wait to finish this

[@mebart6667]

Can we make with other material? Not wood cuz I can't buy a saw of something to cut wood cuz my parents don't let me

[@nelsonpeddle8972]

My son will love this! Thanks! Subbed.

[@AUTgeSKIPPTshomemadeguns]

He will love my guns too, they are very easy to build and look like the real guns. Take a look on my channel.

[@CoCoNutZ4eVer]

23:07 "weeeeeeeee!" -fly

[@RBguns]

Yes

[@RBguns]

Du brauchst eine Laubsäge (kostet nur 10-15€) oder eine Dekupiersäge. Mit anderen Sägen wird es nicht funktionieren.

[@Creeperboy099]

Dang, that looks well engineered. Firing action based on a real gun?

[@chrismclinmusic5880]

no

[@colheitanacidade]

Congratulations. Your channel is one of the best . Success to you. A big hug.

[@AUTgeSKIPPTshomemadeguns]

I also make cool guns, free templates and tutorials. Please support me too.

[@RBguns]

Ne, die Maschinen hab ich schon länger. Die Säge ist ca. 20 Jahre alt. Ich hab auch noch andere Sachen gemacht. Modellbau und so.

[@calicraft1537]

GR8 job man ! my son love it ,I have to make one on my cnc router very soon ,he can wait :)

[@MrPhoenix1138]

Hello! My friend and I are considering making this rifle, but we can't find 4mm plywood anywhere where we live, only 5mm; so we were wondering if we could use 5mm thick plywood and achieve the same results. What do you think? Other than that, great videos! We're really hooked!

[@MrCarrabouzo]

magnificent models, very detailed plans. Thank you

[@grantbunner7068]

Hey since your the most recent person can you tell me how to print the designs for these

[@MrCarrabouzo]

You have to open the link, and look for the PDFs that put lever action, and after the tutorial leaves the templates sheets.

[@domenicofiumarelli8977]

you're the best! greeting from Italy

[@wataruomori8134]

Hello, Thank you very much for sharing this great design. We little bit modified your gun's structure by strong cardboard and put decollation on it. Then we are planing to sale it in Japanese market. Please kindly notice it. We are grateful to your amazing work. Thank you very much.

[@ammarabada8002]

شكرا لقد اعجبني ما تقوم به من أعمال رائعة

[@lemarchand_official]

Thank you! I will try it! Cheers from Brasil!

[@RBguns]

not yet

[@epicRMiddleton]

I love lever guns, can u do a Winchester model 1887 bootleg.

[@TheLooserBrain]

Dude I realized I was watching this for 23 minutes.

[@maelcloutier3226]

TheLooserBrain hhhhhhggggg

[@rodrigosalmito1186]

Construções de papelão e cola

[@samuelcosta7843]

I downloaded, thank you for your attention!

[@TheRealKingDong]

Is there another way to get both pdf's for your tutorials? Pdf always is corrupt. Thanks you for all your great work and effort!

[@RBguns]

@Milkey ElectriX it's a fret saw

[@blestor6]

RBguns You're amazing, brother, please add more videos

[@trungtinlam4967]

+Fan Anime Việt Nam thanh niên bị phê thuốc à :))

[@jjgamesnl8424]

RBguns lol

[@h20giovannimarquez59]

RBguns

[@mikewalsworth]

Jjgames Nl Nfgftssygcbbhgjhghgghhvgghbjhgbfdftr is the first

[@isaactorres86]

RB thanks for the info, I managed to download the template to make the impression.

[@purplelava7874]

Man you got skillz

[@dannercroll8553]

I am planning on making a Rubber Band gun similar to this. I just have a kind of random question, how much do those rubber bands hurt when fired?

[@kendric6571]

i have worked 4 and a half hours to do it and i finished Yay :D

[@RBguns]

please download the pdf file (link in video description) and print the templates on label paper. (A4 printer)

[@franklincedeno7326]

I'm from venezuela, I built this gun am I was fine and works great

[@LaserGuy1]

Looks like a great project to cut and design engrave on a laser.. For the visually challenged, The link to the plans is in the description box right under the video. If it was any plainer it would probably bite you..

[@silence723]

I love your channel can you pls add a video "How to build a FN P90 Rubber band gun"?

[@djpandup]

Ich finde deine Videos richtig Klasse werd ein paar sachen nach bauen danke ;D

[@maxquipervoi477]

Can you make a tutorial for building the mp40 please?

[@TheRealKarma1]

dude u could make a series like how pwnisher did the cardboard warfare

[@yanovermeire9902]

Is it okay to apply finish to it ??

[@darnellwilson6220]

Hi there I really like your work

[@captainrichter1992]

can i ask what's the name of that tool similar to c clamp?

[@STARCEVoO]

Единственное, что я не понял, зачем он разрезал чертёж и клеил его по отдельности? Можно же было целиком на доску наклеить и по-тихоньку разрезать...

[@Mega40RTT]

чел это так не работает пилил электролобзиком

[@Mrdrcaptaintroy]

Great video! Cool gun and excellent tutorial

[@Gr33nLetsPlays]

Cool und wo her hast du die ganzen machinen und so ?

[@RBguns]

No. Finished school 20 years ago ;-)

[@RBguns]

No. I'm sorry. Only english. But there are not many words to read in the plans.

[@CphVidz]

awesome! What kind of glue did you use? The type that I have takes 24 hours to dry.

[@jaredcaffrey6770]

Great design, do you plan on making any more tutorials?

[@taylorkingct8305]

RB maybe you could tell us or make a template or video of a easy gun to make

[@marcelosilva-vd6ym]

Aonde consegui esse desenho que obra de arte parabéns

[@eggfuyung9214]

This is an incredible build! Are all the parts you cut out the same thickness of material? Also, can this technically be done with another thickness of wood that is close to 5/32, say 1/8th thick wood?

[@RBguns]

eggfuyung92 1/8 is possible, but you have to adjust some parts. (dowel length, barrel diameter,...)

[@eggfuyung9214]

I ask this because since the wooden parts would be the same thickness, theoretically, all the parts can be cut out with a laser cutter, which I may do.

[@RBguns]

eggfuyung92 It's all the same thickness

[@ij20man35]

wouldnt it be quicker to put all the layers on and then wait for them to dry together?

[@40tarr]

You are very good and how do you come up with these guns

[@jaredcaffrey6770]

Have you decided what type of gun your going to do?

[@Mearlyn11]

Is there a posting somewhere on how to translate these plans? I can't buy materials in metric. Why do some of the measurements have a slashed zero before the number? Love the designs. Great work.

[@RBguns]

slashed zero = diameter

[@Mearlyn11]

Ah, thanks.

[@peterjordan5947]

@RBguns could you let me know what thickness the plywood needs to be for your stencil cut outs

[@latoyachaney9637]

Rb guns you are amazing please make another video

[@LuucppshomenetLuucppshomenet]

I love dis youtuber

[@عبودخليف-ر2ض]

هل يجوز صناعتها حقيقيه بمعدن ..وتطلق رصاص حقيقي

[@jaredcaffrey6770]

Do you know approximatley when your next one will be realesed?

[@vincedcisthename4621]

What kind of saw is that it seems to cut through wood pretty easily

[@chewynum]

Could these lans be used to make LARP/SCA band guns? We use silicone exercise tubing, it has a lot more strength then a normal rubber band.

[@RBguns]

ca. 96cm long.

[@evelyntaque8208]

please advise if they sell the beautiful weapons

[@kendalldavis4332]

This is a truly amazing build!!! Many thanks!

[@darkmendes5864]

Ele atira sem as borrachinha ?

[@Zeyone55]

grand merci !! fichier pdf et des tutos trés bien faits ! Un nouveau jouet pour mon neveu ^^

[@muttproductions2536]

Hey, have you ever made a rubber band gun version of a double-barrel shotgun, like what they had in the 19th Century?

[@RBguns]

not yet

[@rangnark3719]

do it please

[@leehornglin]

Awesome!!!　Yor are No.1. Thank you very much.

[@rodrigoavellaneda5697]

hello I'm from Argentina and does not come that thickness of wood. 3mm is achieved and 05.5 mm. you will be able to 3mm?

[@dwood0397]

If anyone in North America (Canada) has made these, what thickness of wood did you use? I cannot find 4mm plywood anywhere.

[@ronaldocarvo]

This project is awesome!!!! Thanks for share it with us...

[@Youresetup]

You are the best ❤❤❤

[@Eddys_World42]

Do you mill your own wood to the appropriate thickness or do you buy it pre-milled from a website?

[@fishingdiago]

Thanks for the Video, I would like to make one for my grandchildren but cannot find the plans. I could not find them on the video. Could you give me a site to download them? Thanks!!

[@AUTgeSKIPPTshomemadeguns]

You canb take a look on my channel, there are free plans, free tutorials and amazing guns.

[@flutedscissors9655]

how do i make the barrel longorr

[@sieverts455]

hey I'm wondering if you could make a sniper rifle from team fortress 2. It's a unique rifle and very cartoony since the scope is massive and skinny body and I would love to see it made as a wooden working prop which I would love to make myself. Since your the genius

[@wataruomori8134]

Hello, just we found your amazing design rubber band gun. We made a trial rubber band gun by cardboard via your video and It was great! Would you mind If we'll sell it in Japanese market? Please kindly let us know the possibility. Thank you very much.