Tuya Smart Door Lock Fingerprint and Passcode Setup

[@remsonvictorino7498]

Salamat po sir, malaking tulong po itong video na ibinahagi mo sa amin, thank you so much sir, pag palain ka nawa, godblessyou sir 🥰

[@JerroldEllo]

Tnx , this door lock is very user friendly . Medyo challenging lang ang pag butas sa door.

[@JL-ju6jj]

I think you have to add the tuya gateway

[@JerroldEllo]

No neee . TTlock yung need mo ng gateway .

[@israelcalata8644]

Boss may binebenta aq Yale automatic door bka gusto mo bilin

[@JerroldEllo]

Hanap ko for sliding glass door

[@ronaldcuisia8012]

This smart lock has more features than the first smart lock we have. Thanks for the manual configuration walk through. For some users who may not yet know. Please take note that there is an app included with this smart door lock. App name: Tuya Smart for both ios and android users.

[@harryskay617]

Can you guide me more on that door luck

[@JerroldEllo]

@harryskay617 I have related videos about this lock

[@Krisdidcares]

Very thorough, you are getting better.Good job!!!

[@JerroldEllo]

Thanks te, I'm gonna share more in my future videos.

[@giannistzoumanis3468]

Great video. I purchased the smart lock. But I haven't installed it. Do I need a mechanism so that deadbolt comes out when you turn up the handle?cannot find any. All the mechanisms are using key to bring out deadbolt

[@cindysalinas9752]

This is my second one, great to have.

[@salmaalhjajI]

thank you so much, that was a great help, can you PLEASE make a video on how to use the camera? also how to open and close the door via the smart life app

[@chocoyieygaming220]

very useful naman nito and napakahigh tech din lalo sa panahon ngayon mas need maging maingat

[@JerroldEllo]

may downside din ang technology since the cloud servers are located overseas mostly in China

[@LighthouseMultimediaConcept]

Hi Techy, thanks for your video.

[@priscilaetzhazaitm.prestes9989]

I put the finger id and the code number, but when I put the tag the answer is: please enter a secund ID, so I put the finger and open. Well my door need two confirmation. Can you help me? I change that! Just go in System Settings: choose single settings.

[@TDUKbackup]

Have you fixed it??

[@dumitrymd5557]

If I leave the house and close the door without lifting the handle, does the door lock automatically? So that no one can enter? Or is it necessary to lift the handle every time I leave the house to lock it? Thank you

[@inahb.bautista4928]

Super helpful!!! Thank you po ❤️

[@tigerlit6813]

Thank you. Very clear and concise.

[@oyvdis]

Hello, thank you for this video. Can you guide on adding smart card to unlock

[@JerroldEllo]

Press *#admin info , press 2 for user settings , press 1 to add user. Tap the IC card once .

[@cn5lg]

Thank you for your video. Do you know how to change the Master Password? There is nothing written about in the manual. And I could not find it through trying. (Or if anyone else knows. I am using the Raykube K12)

[@iwantu900times]

mine does not auto lock and anyone can open the door from inside. is there a way to lock door from inside as well which requires remote unlock or admin to open same as from outside. because kids can open the door from inside easily

[@itsathaithing]

Helpful thank you!

[@467grfhly]

Thanks for your video!!!

[@brayosammy]

Nice video

[@NervelynTuro]

Hi, I bought one, but the one I purchased was for the right-handle door instead of the left. Can I adjust the handle?

[@JerroldEllo]

You can rotate the handle

[@SpyroCurtis]

Thanks for this video i install mine and i have issue. From inside when turn up the handle locks, from outside it doesn't pop out the lock and leave house unsafe, tried it with admin from outside and user then i push it up to lock the bar doesn't do anything... what need to do? thanks.

[@TheBlueForce]

Same problem

[@JerroldEllo]

Did you check the square bar/ knob spindle that connects the outside and inside lock?

[@maailshiyam6339]

Thanks man. Everything else says to long press * But you saved me so much headache.

[@stinn71]

Hi. Can you explain about single unlock and combination unlock? Thank you

[@JerroldEllo]

Need to use 2 unlocking methods like pin and card before you can unlock . That’s just for added security but too cumbersome , I don’t use this feature

[@diycraftideasandbakedgoods321]

un handle nya pwede bang malipt from right to left? na hindi mababaliktad?

[@JerroldEllo]

Yes, you can reorient the handle according to your door opening . Meron screw sa loob

[@jaymarkverceluz]

Kumusta po yung tuya smart door lock nyo, okay pa naman po hanggang ngayon? Thanks

[@cablesystemsinterprise464]

Good work..any tutorial on connecting Tuya with Wifi and notifications

[@JerroldEllo]

I’ll make a separate video for this

[@customizeluxury4214]

Good Job Sir!!!

[@JerroldEllo]

Thank you.

[@TooXXiiK]

Great vid ! Is is possible to record the card to the mobile phone and then use the phone instead of the card? Thank you

[@JerroldEllo]

I don’t think that’s possible . I only tried using an NFC sticker . It’s cheaper than buying an extra IC card.

[@nielpacs7880]

Parehas lng po ba sila ng process ng snail home smart door lock, thanks sa response

[@JerroldEllo]

Almost the same features pero kelangan pa ng snail home ang hub or gateway to connect to your wifi network

[@ravelcop]

Thanks for the video! Is it possible to disable the auto lock when door closes? I tried the passage mode, it works but now I cannot lock from the inside. Even if I activate deadbolt from inside, person outside can open it without passkey or fingerprint. I had to disable passage mode to be able to lock it from the inside. Tnx

[@JerroldEllo]

yes you cannot lock the door from the inside if you enable the free passage mode

[@MuzanAL-Muzan]

How I can disable it? I think I put his mode by mistake!

[@RussellYoud]

Having problems. When I lock it says the door is unlocked. And when it says lock it is unlocked. Help on that topic would be great.

[@TDUKbackup]

Have you fixed it??

[@RussellYoud]

Yes. I finally figured out the instructions. 😂

[@JerroldEllo]

@RussellYoud nice , I’m glad you figured it out.

[@Joselito-q1e]

my problem is that even if the door is locked from the inside; anyone can open it from the front door without using anything, the person can easily enter the house by just lifting the door handle. This means; the key, card, or finger detection never works. what shall I do? thank you

[@JerroldEllo]

You need to setup an admin account to prevent this from happening then you add users

[@tonyhilton1453]

is it possible to change the admin code if we have forgotten it, the fingerprint only works so eti es also. is there reset that can be used to start agan? great vid.

[@JerroldEllo]

there is a small button inside the battery compartment that you can press for 6 seconds to reset the lock back to its factory state

[@malikmasfs]

Thank you

[@TheUnicornHeroes]

hi po.. tanong ko lang anony klasenh tuya door knob po ito? anong unit po? 🥰

[@heraldking7368]

Q. How if the door is wide open? Or didn't close exactly. Is the automatically door lock will operate? Leaving the door open in lock mode? Is it waterproof?

[@JerroldEllo]

Yes , it will still automatically lock . It’s better to install a door closer . It’s more of a spill proof but not totally waterproof since there’s a tiny hole at the bottom for the physical key

[@mattr726]

If you are still considering offering reviews of other locks, I’d love to see Smart Double Sided Biometric Fingerprint Door lock APP Control Passcode Card & Mechanical Key - ALGEBRA

[@SalmaMassoud]

Hi again, how do you set up the little entry physical pass pads?

[@TDUKbackup]

Have you fixed it??

[@jaycardcast]

Content Suggestion: Sensibo making your AC / Inverter smart.

[@JerroldEllo]

Sensibo is nice but pricey. You can use a humidity sensor that will trigger the smart plug to switch on your ac if the room is reaching a specific temp threshold. If you want to make sure that it’s off when you’re out , you can use IFTTT. Sonoff TH10 sensor only cost P710, Sensibo cost P5k.

[@npsalam]

Fingure sensor not working.. How we re program the smart lock? Many time reset, but same issue

[@NwekeBenson]

Please I need a guide to delete and program a new smart card

[@JerroldEllo]

That’s easy. Just open your door using the smart card and listen to the serial or the code that will given by the voice prompt. You can also see the serial reflected in the app. Press the *#admin then you press to for user settings , press 2 again to delete then enter the code .

[@nartsun]

How many people can add fingerprints?Thanks

[@JerroldEllo]

99

[@vincentcorsanes9892]

Waterproof po kaya ito?

[@JerroldEllo]

In the description it says waterproof .

[@monafebrianti7212]

How to reset the setting back to first?

[@JerroldEllo]

To reset the lock , open the battery compartment and press the reset button with a pin for 5-10 seconds

[@paol03]

Do you know how to fix rhe issue where when I lock it inside, I can still unlock it outside, basically lock function is not working? TIA.

[@JerroldEllo]

Probably the one you got is a newer version that supports normal open mode or access free .

[@abusaud6235]

how to solve it, please support

[@JerroldEllo]

You can always unlock it if you will be using your admin account. If you enable the deadbolt/deadlock from the inside, all user accounts will be disabled.

[@jhareng]

Have same problem, lift lever up inside or outside to operate dead bolt. Anyone can open by pressing lever down inside or out. Looks like its in passage mode, now to figure out how to get out of it as manual is next to useless.

[@jhareng]

Sorted, reset the lock with a small pin. Lift lever up from inside bolt shoots forward. Install batteries! Downloaded the Smart app and uninstalled the Tuya app. Registered me as Admin, assigned pass code, swipe card, finger print, phone number etc. Now works as it should.

[@sagamanic3083]

Mine is not locking, how do I fix it? Thank you

[@JerroldEllo]

Touch the fingerprint panel , it will activate the auto lock

[@folusoorekoya8188]

Nice Video. My smart lock says fail when I select Intelligent connection press on the lock. Please, what can I do to for the action to be successful?

[@JerroldEllo]

Intelligent connection option is for your lock to be connected to your wifi. After chowing that option the lock should be blinking before you connect it through the app. Make sure you input the right SSID and wifi password

[@mommystara.1811]

sir i got tuya smart door lock just a month ago but til now it's wont open the door when I unlock it. I followed evrything the seller told me what to do from restoring the factory system to adjusting the motor direction but I just couldn't make it work. any advice I can get 🙏🏻

[@JerroldEllo]

Do u hear a voice prompt that says unlocked ?

[@salyousi1012]

I just bought my home and need your help to change the password and make new users. All I know is the user password they give me is it enough to reset the device and make new users?

[@JerroldEllo]

Just do a hard reset if by pressing the reset button inside the battery compartment for 6 seconds until you hear the voice prompt that the lock is restored to factory default settings . Create an admin account after reset to manage the lock and users

[@SalmaMassoud]

How do you know the serial numbers of the different pass codes and fingerprints?

[@JerroldEllo]

Every time you unlock the door it will be reflected in the smart life app or Tuya app. You can also hear the voice response corresponding to the serial.

[@heraldking7368]

Does it lock even the door is open?

[@judeestopa4424]

How do I fix the enter master information without a finger print.. How the first step to register? I'll try the code 123456 but it's also failed again.. What I suppose to do? Please

[@JerroldEllo]

Do a hard reset and use 000000 (6 zeros) as default code

[@hannahthea8920]

Hello po. Ung door po namin originally round ung hole nya from our previous door knob. Will it be ok po. And Paano po ung installation nung door knob para mag fit ung set nya dun sa wood? Thank you po for answering.

[@JerroldEllo]

That’s fine coz the lock will cover the hole. At least 2 inches ang diameter to fit the mechanism

[@Henry72sg]

Hi was thinking of buying this model from online. So far any problem when you use? Any issue? Can advice? If want to have more access card, how to do? Hope to hear from you soon.

[@JerroldEllo]

I did not encounter a problem luckily since installation. If you're planning to get one, there is a new version which allows free access so that you don't have to unlock each time you enter especially when you are just staying at home. Only 2 IC cards are included but you can provide or generate a PIN code

[@Henry72sg]

@@JerroldEllo thanks bro, the access card if i purchase online how to configuration? Secondly, which model you recommand?

[@JerroldEllo]

Just add user then tap the IC card , I’m not particular with the model number but I will check

[@Henry72sg]

@@JerroldEllo bro, this model so far confirm no trouble? Battery comsumption drain fast? Sorry ya ask so much hehe...

[@JerroldEllo]

Battery life depends on usage. There’s always someone in the house so we do not unlock the door frequently. If battery is your concern there is a newer model where you can charge the door lock via the USB port .

[@sandippatel5419]

How many new users we can add in the lock ??? Could you please answer

[@JerroldEllo]

99

[@danignacio2629]

Hi can u show us how to add ic card?also how to unlock remotely using the app?

[@JerroldEllo]

I’ll send a short vid tomorrow

[@Slenderwood]

Do you know by any chance why the lock is not staying lock? Like, for example, I can lock the door and the lock come on but it does not stay, when I push the handle down the lock just unlock without me using card, pin or any touch

[@JerroldEllo]

After unlocking press 5# and the autolock will be disabled

[@Slenderwood]

@@JerroldEllo I deactivated through the app but it doesn’t stay lock again. By the time I push the handle down the lock goes inside again without the need of a key or anything

[@JerroldEllo]

The autolock will be enabled again once you touch the fingerprint panel

[@nich8955]

Sir, I'm renting our condo unit to guests. Do I need to change the passcode after the booking or can i just give temporary passwords to my guests without changing the passcode itself? What's the difference between the Bluetooth version (price 2k+) and the wifi version (3k+)?

[@JerroldEllo]

Just create a temporary passcode. You can set it to expire at a certain date and time. The good thing is you can do it in the smart life / Tuya app without even going to your condo if you’re able to connect the lock to your wifi network

[@mariemendoza2467]

@@JerroldEllo Hi sir, is it still possible to create a temporary passcode or get a notification from the app if the smart lock is not connected to the wifi?

[@JerroldEllo]

@@mariemendoza2467 nope, it’s only possible with the Bluetooth version of the lock

[@JerroldEllo]

Not possible , you need to connect the door to your wifi network for the temp passcode to work

[@ayoubmahmoud1]

@@JerroldEllo Hello sir, great video, does the lock come with evertyhing needed to be connected to the wifi or do i need to get a bridge or something? and i guess once the lock is connected i can set temporary passwords (for a fex days) even if i'm not connected to the sam wifi isn't ?

[@MuzanAL-Muzan]

I reset the system! But now I can enter even as admin! Even I used 12345, I addition now any one can enter by fingerprint without any registration! Also, I can not control the number it repeated by itself like is there is problem!

[@djds8223]

Is it waterproof?

[@JerroldEllo]

Yes

[@wabyyyu]

Pwede ba tong connect sa alexa or google home or ibang smartlock door ang pwede? Thank you

[@JerroldEllo]

Google home yes, not sure with Alexa .

Is there a way to leave the door unlock so when you have a time with constant in an out do not have to input a code/card every minute?

[@JerroldEllo]

Yes , if you have time watch my related video. To do it just unlock then press 5# to enable free passage mode. It will save your battery in this way .

[@cliffgeraldyap4468]

@@JerroldEllo hello po ask ko lang yung skin kasi kahit nka lock na sya is na oopen ko naman from outside without using any password like ung handle lng

[@JerroldEllo]

Naka free passage mode ang door , press the fingerprint panel para mag autolock

[@martinroberts5037]

My wife is the admin and has her finger print and pass code working but we cannot get my phone [Motorola 5G Ace] to connect. any suggestions . Help please.

[@OneDirectionMorocco1]

hello i have installed the same door lock, and i have a child and i don't want him to open the door from inside. how can i lock the door from inside. is it possible to do it with the app ? please help me !!!

[@JerroldEllo]

I’m sorry you cannot disable the lock that way for safety reason. In case of emergency like when there is fire or earthquake , it’s important that the people can get out fast and easy. Just install a latch/ sliding bolt in the upper portion that is beyond his reach .

[@yup7722]

Hi, what is the procedure of factory reset it? like same as new?

[@JerroldEllo]

Yes, just press the reset button located inside the battery compartment

[@genalabanveloro]

Done subscribing

[@Virlo]

9# doesn’t work so what now? I can’t access that menu how to fix that?

[@JerroldEllo]

I just tried mine , it did not work at 1st. Maybe there’s an issue with the cloud server. It’s working now without any problem

[@Virlo]

@@JerroldEllo I have it like 3 months and it still doesn’t work. I use it with TTLOCK now that is the only thing what worked but I can’t get into the admin # thing to put it in pairing mode

[@JerroldEllo]

I’m. not familiar with TTLOCK since I connected the Tuya smart door directly to my wifi. To access the menu using the smart life app I just need to press *#. If I press the 9# it will request remote unlocking thru my phone.

[@Virlo]

@@JerroldEllo I tried all of that but I can’t put the lock in pairing mode without doing 9#/*# both don’t work even after reset and removing ttlock.. somehow if I press it it says failed like if you press the wrong passcode. Maybe it is something else idk how

[@patricktuzon]

Hi sir, when I touch the panel, it enables door bell. I cannot find it on the manual or search it on google on how is the proper sequence in enabling the door bell. It is a hit or a miss and its frustrating.Hope you can help me. Thanks!

[@JerroldEllo]

I didn’t install a Tuya doorbell but I think you can check that in the scene tab in your Tuya or smart life app. Check the automation coz ur doorbell might be connected by default .

[@patricktuzon]

My smartlock is the same as the one on your video sir, there is a feature that you can enable the doorbell but I cannot find it in the manual.

[@nouraa3397]

Can i connect this lock with alexa to request her to open the door?

[@amirl3703]

I'm wondering as well can unlock using Google home

[@JerroldEllo]

Not possible with this lock

[@angeloandrada7800]

Do you have an idea how many fingerprints can be added?

[@JerroldEllo]

50 fingerprints

[@prettydonaire1002]

Hi po kailangan po my wifi ? Bago setting for passcode,fingerprint,and key card?Im new user po kasi

[@JerroldEllo]

No need. You only need the wifi if you want to generate a temporary/dynamic passcode or unlock the door remotely.

[@AloeVera22]

How in the world to add network on this device. I mean it keeps saying locked locked also it is supposed to have a blinking green light but how can I do that. Even I followed this instructions I have

[@mizahakimie4498]

hi sir, do you know how far the device can connect from the router? afraid if the wifi only short distance

[@JerroldEllo]

Each deco is supposed to connect devices wirelessly within the 2000 sq meter but don’t expect too much. You need to connect the router to the main deco and it doesn’t really matter how long since you have to connect the 2 using a utp cable

[@T20fantasy]

Hello I want to know how can i unlock my door using wifi or smartlife app remotely without pressing 9+# key. Or I want my alexa to open the gate directly whenever I say open the door my model is similar to yours

[@JerroldEllo]

With this version you need someone to press the 9#. Merong version na Hindi na kelangan but you need to buy a gateway around P1700 if you need this remote unlock feature na walang user intervention. I haven’t tried using a virtual assistant pero I think it’s possible . I’ll check muna paano ma open using google assistant .

[@Iklaus1]

Is the lock can be connect with alexa ?

[@JerroldEllo]

Technically yes but you cannot set it to unlock through Alexa or at least check its status. You can only see it added in the centralized app

[@jervisjackson7002]

Hi sir I have a question about the Smart lock door , it was connected to the home wifi when you use tuya app for open it to relative by remote control when you are far from home ? if yes how connect it to the home wifi , nobody show how do it .

[@JerroldEllo]

If the door is already connected to your wifi network, tell your guest to press 9# and then an unlock request will be sent toy your phone

[@JerroldEllo]

to connect the Tuya smart door to your wifi network, 1) press *# 2) enter your admin info 3)press 1 for admin 4) press 3 for network setting 5) press 1 for wifi then enter your wifi information

[@ani.dimitrova]

how do you setup the toya application?

[@cleversonsouza1439]

Dear Jerrold , I would like to know if you could help me, please.! I bought a X9-Black(Tuya APP), thought Lazada, I would like to know if has a feature of “aut lock”, so when the door are close, after few second it lock automatic. I look at the app and manual and I could not see it. Thanks Cleverson

[@JerroldEllo]

Yes it can autolock

[@johnalcedo5581]

Sir natry nyo ba sa alexa or google assistant kung compatible?

[@JerroldEllo]

My google home serves as a central app for all my smart devices. I can see the app added in my google home but I can’t control this smart door lock. I can only open remotely thru the Tuya smart or smart life app.

[@flipward]

Hello po! Pwede po ba malaman paano ninyo ito naikabit sa door? Any tips paano magbubutas sa door or may kakilala kayo sir? Thank you!

[@JerroldEllo]

It comes with a drilling template for you to know exactly where to punch holes. My dad helped me install this lock. Hanap ka nalang ng carpentero dyan malapit sa inyo for sure marunong sila mag kabit nyan.

[@flipward]

@@JerroldEllo Thank you so much sir! Last po, how were you able to change the language to English? Samin kasi nasa Chinese. I tried following the instructions: *# then admin code but after that alam nyo po ba what is next? Thank you! 😊

[@JerroldEllo]

*# enter admin, press 3 for system settings , press 3 again for language settings , then press 2 for English

[@esteesky]

What is the actual application smart life or tuya smart both is the same right?

[@JerroldEllo]

If you will be using a third party app like the IFTTT, use the Smart life. Both apps are practically the same when it comes to the functionality. You can use the same account / username in either app.

[@esteesky]

@@JerroldEllo ok bro tq so much for the info

[@esteesky]

Hi bro can I ask what kind of battery u using for that smart lock consumption of the battery usage how long can last?

[@JerroldEllo]

Energizer. Battery life depends on usage. May tao kasi sa bahay lagi so no need to open the door from the outside which will consume the battery. It’s been 4 months and the batt is still full. It could last up to a year according the the product specification.

[@kuyaahangkel6091]

How many batteries did.you use sir?mine is 4 double AA

[@JerroldEllo]

@@kuyaahangkel6091 4 X AAA energizer gamit ko

[@markanthonyg.lagunday5630]

SHANONG Smart door lock namn idol? Same lng ba sila sa tuya door lock ng settings?

[@JerroldEllo]

If you order in bulk from the manufacturer you can request an ORig manufacturer equipment meaning you can have your name as the brand , what’s important is for the lock when advertised it had the Tuya Smart kasi app lng naman

[@aimeehetrick3351]

When I enter a user after I press 2 for user setting then 1 to add user, all the numbers do not display to add the code. What should I do to get all numbers to come up. Keeps asking the same question again and again

[@JerroldEllo]

Have you tried resetting the lock to factory default settings ? If numbers won’t display you can’t enter or add the code. How about adding an administrator ? Did you encounter the same problem?

[@ay7aga68]

@@JerroldEllo please help me I have same it

[@JerroldEllo]

@@ay7aga68 what’s the problem with your lock ?

[@ay7aga68]

@@JerroldEllo after I press 2 for delete all user no numbers don't display

[@ay7aga68]

@@JerroldEllo and Everytime I press the rest button no action done please help me every one press any 6 numbers and # can open my door

[@marcomow]

nice video! Do you know if the audio feedback ("locked"/"unlocked") can be disabled, or changed to a more quiet mode?

[@JerroldEllo]

Sorry but that’s not possible since it is not available in the settings

[@marcomow]

@@JerroldEllo thanks for letting me know!

[@nicolasarimany3501]

it can be disabled via the app if Im not wrong

[@jhareng]

Theres about 4 settings in the app on how loud you want the lock to operate.

[@marcomow]

@@jhareng thanks! Is the option to completely disable the sound available?

[@timileyinsamuel5078]

Does the device accept any frigerprint at first install

[@JerroldEllo]

Yes

[@elingsuyono5809]

How to use wifi

[@Lorie-i4e]

hi Kuya sana mapansin mopo, yung generated na password na 123456# nadedelete po ba un ? paano po sya palitan ? Thank you po

[@shaxy1988]

My smart lock will not respond when number of fingerprint failed attempts happened, which I believe for security, how to disable this feature? Because my kids keep touching the fingerprint scanner until it activates this security mood.

[@JerroldEllo]

Sorry you can’t disable it.

[@Bercik87]

Can you manage users over Wifi (app on smartphone) remotely (far away from door)?

[@JerroldEllo]

Anywhere you are as long as there’s internet on your phone you can manage the decos

[@Bercik87]

@@JerroldEllo thx for quick reply

[@theuncanspan]

hey Jerrold boss, i want to install it on the main gate of the house but it's an old and heavy steel door with a rim lock. is it possible or should i buy a modern door?

[@JerroldEllo]

There is a rim lock version of this Tuya Smart Door Lock with all the functionality similar to a main door version and it’s waterproof

[@theuncanspan]

@@JerroldEllo hey Jerrold i just saw your reply. Mine has just arrived today, same as yours and I'll have it installed soon. I'm gonna replace the front gate anyways and the blacksmith will measure the mortice and install it for me.

[@pczypczy]

hei but do you know what is a different between mode : singel, combination and passage modes???

[@JerroldEllo]

You can use either of these methods to open the door. Using the fingerprint feature is very convenient , IC card or temporary password for your guest , or the wifi feature if you want someone to enter your house by simply confirming the unlock request sent to your mobile phone .

[@pczypczy]

@@JerroldEllo hei thx for quick replay yes this i know but in the "unlocking mode setting" -> nr 2 in system setting you have 3 options : press 1 to singel mode press 2 for combination mode press 3 for passage mode - this i find solution (when is unlock press 5 and # and door are still open to next closing.)this is good when the guest coming in during the day :) I trying find diferent between singel and combination mode :)

[@JerroldEllo]

Single mode you use any of the methods, combination mode you use the card + passcode , passcode + fingerprint or any 2 combinations . You can also enable passcode (3) or disable in option (4}

[@joenelsaracho4836]

Sir ano specific na type yun binili mo may link ka ba sa lazada?? Ang dami kasi pagpipilian eh and how much nabili mo nagrarange kasi siya sa lazada from 1700 to 6k iba iba kasi yun type ty sa sagot

[@JerroldEllo]

I bought the lock in Jan 2021 for P4,075 only pero generic Tuya smart door lock kasi to walang model number . Meron na updated version neto at meron ding kelangan ng gateway (P1400)

[@joenelsaracho4836]

@@JerroldEllo ah okey tuya din kasi tatak

[@unclepitas4637]

how to connect this to my tuya apps

[@JerroldEllo]

Activate the keypad, press *# , press 1 for admin, press 3 for network, press 1 to add your smart door to your wifi

[@redespiritu8053]

Where to buy sir. Link pls

[@JerroldEllo]

The store in Shopee no longer carry this lock , the one they’re selling right now is with a hub to connect to the internet . I will try to look for a similar item then k will let you know this week

[@leandrocosta3028]

Nice video! Please, how to reset passcode?

[@JerroldEllo]

If you want to remove the passcode press *#admin then 2 for user . Delete the passcode associated to that user . Go to the app then click user . Delete the passcode of that user

[@leandrocosta3028]

@@JerroldEllo Thank you very much!

[@genalabanveloro]

Sir, unsay cons aning smart lock door?. Unsay mga what if Ani?

[@JerroldEllo]

More than a year nako gagamit, no known issues so far. Low battery warning after a year , problem is if you ignore the warning until such time d naka ka sulod sa house. Pwede man nuon ang physical key just in case

[@kentuckypausal]

What material is it made of? Plastic or metallic?

[@JerroldEllo]

It’s made of zinc alloy

[@05naruto05]

Hello Sir. Alam nyo po ba yung default admin password? D ko ka kasi ma connect sa app. But need ko sana mag add users using the lock itself

[@JerroldEllo]

Default is 123456 ang ibang version 000000

[@haytham4094]

I have another model but i cant reset it please help

[@CristianoRonaldo-qq2gn]

do you know what is admin info at factory state?

[@JerroldEllo]

123456 or 000000