TV Man Mask Skibidi Toilet | Cardboard DIY

[@tajaygordon9358]

Legit life saver. My stepson told me he wants to be tV man. I had no idea this was even a character. I’ll be making this tomorrow for his Halloween costume. 🎉

[@CardboardCosplay]

Me either! I found out about it last month haha. If you're making it for a kid, you might need to decrease the size when printing it so it isn't too big for him. Happy Halloween!

[@drawushko]

Hello, could you tell me your height so I can refer to the size of the TV? if possible we can get in touch to discuss this if you wish, thanks!

[@XYZ-nf5be]

Thank you! Your instructions and attention to detail were spot on. I skipped the fine details for my version, but my kiddo thoroughly enjoyed Halloween as TV Man. Props to you!

[@CardboardCosplay]

You're welcome! I'm so glad it was helpful and your kid had a great Halloween 🎃

[@veeloocityyy]

One more comment here, thank you for this tutorial! Despite melting my foam TV with spray paint, I won a contest at school and got a free discount voucher for a restaurant!

[@CardboardCosplay]

Ah that's awesome! Congratulations! I'm glad I worked out in the end. I was worried about the melting. Next time don't use spray paint on that type of foam haha

[@bingobongo238]

Using this for an AM cosplay, thanks vro 🧟‍♂️

[@yipee3324]

LOL IM HERE FOR THE SAME THING XD

[@kaylathomas7912]

Thank you so much! My son is so happy about his Halloween costume now and it was pretty easy to follow. The printouts were great - I cheated and made the vent holes bigger and wow did I use a ton of glue. Would have definitely been easier if I had a pad like that to cut on - wish I could post a picture!

[@CardboardCosplay]

Oh, I'm so happy it worked out! Your son has a great parent! I don't blame you for making the vent holes bigger...they're definitely a pain to cut out haha. Happy Halloween 🎃

[@amylane6779]

Did you decrease the size? My son wants this for Halloween. I tried making one out of foam and FAILED. 😞 I can only decrease the size of the template in 10% increments. I believe 10 % may be to large but 20 percent may be to small. He is only six but has a big head. LOL

[@CardboardCosplay]

@@amylane6779 Hm...I haven't decreased the size to double check. I'm obviously not 6 years old haha, but my advice is to print out the first "group' in the template so you get the piece titled "screen." Hold that piece up to his head. If it frames his head nicely and doesn't look too big on his shoulders, it should work. Try decreasing the PDF by 15%...you'd need to enter "85%" in the custom size section when you're printing it. I print my PDFs with Adobe (not sure if that makes a difference but figured I'd mention it anyway). Good luck!

[@amylane6779]

I decreased by 15 percent and it was perfect. He is a large 6 year old. I would say more like the size of an 8 to 10 year old. He will be upgraded tv titan man. Can you post pics in the comments? I am going to attempt the screen tonight. Fingers crossed.

[@CardboardCosplay]

@@amylane6779That's awesome! I'm glad it worked out. I don't think KZbin allows pictures in the comments, but I have no doubt your son is going to look awesome on Halloween!

[@OfficerRodger]

Idk how old this tut is, what the tut is about, u js saved my skin 😭

[@RookTVchannel]

This will be great for making my own custom TV head, thanks!

[@CardboardCosplay]

I'm glad it's helpful!

[@driftingthruspace]

thank you so much for this!!!! im not a skibidi toilet fan but am definitely an objecthead enthusiast, so i might make this at some point! i'd love if you could make a tutorial for a phonehead as im a dialtown fanatic haha

[@ee930]

Does it stay in place pretty good? Will i6 be too wobbly for an 11 yr old? THANK YOU so much for this, you save me so much time with your template

[@griffinmoranofficial]

This is really cool! There are going to be a million people dressed up as this for Halloween in my neighborhood once I tell my friends about it! 😂

[@CardboardCosplay]

Haha! Nice. Thanks for sharing it with people 😄

[@TheBmwwil]

This is pretty awesome man, thank you. Question, how to you go about keeping it in place whilst wearing it. Is it just sitting on your shoulders? Thank you

[@jlsalusky]

The template link isnt working 😢 would love to make this for my son!

[@bennyfrohna7675]

thank you for this!!

[@MinaManeta]

Thank you so much for your grate tutorial! My son loved his costume!

[@WiseFloppa]

I don’t watch skibidi toilet and don’t really like it, but I used this for my undertale Photoshop Flowey cosplay! :D

[@Fleegled]

Using for this Halloween (; thanks

[@beccafeechan9022]

Where do i find these templates please?

[@Shadow_1086]

The link for the templates doesn't work :(

[@veeloocityyy]

Hey, I dont have enough cardboard rn and I am in a hurry to make this, but I do have a lot of foam, would it work with foamboard?

[@CardboardCosplay]

It'll definitely work with foamboard. You'll need a lot of it, though!

[@veeloocityyy]

​@@CardboardCosplay tried it and it worked, funny enough I found a bunch of cardboard so I started making it again

[@CardboardCosplay]

@@veeloocityyyThat's great! I'm glad it worked out for you. I sometimes get free boxes from stores or grab some from recycling bins in the neighborhood haha.

[@veeloocityyy]

​​@@CardboardCosplayim getting to the paint part (with the foamboard decided to stick to it because it was more complete) but I also have some black paper to glue on, do you think it would look better than spray painting?

[@CardboardCosplay]

@@veeloocityyy maybe. Wrapping each piece sounds like a lot of work. I think paint might be easier/quicker. But if you're confident, go for it!

[@cameroncgp7071]

This is great, any recommendations to get it to fit a kids head properly?

[@CardboardCosplay]

I haven't tested sizing it for a kid, but this is what I would do: Print it out at a smaller scale. Open the PDF, go to File, Print. Under "Paper Sizing & Handling" you'll see a section where you can enter a "Custom Scale." This is where you can adjust the size. I would start off by decreasing it from 100% to 75%. This will print it out smaller, however whether or not it fits will depend on the size of the child. Print Group 1 from the template. This is the PDF that has the "screen" (ie the front of the mask). Hold the "screen" up in front of the kid's head. If the head looks like it fits in the square and looks proportional when you look at the kid's shoulders, you can continue printing out the rest of the template files. If the head is still too small or big, print the "screen" out again at a different scale until you get a size that looks good. I hope that helps!

[@cameroncgp7071]

@@CardboardCosplay I will be testing it this weekend thanks, if it works, you helped a kids wishes of becoming tv man this Halloween come true 🙏🏻

[@CardboardCosplay]

@@cameroncgp7071 I hope so! Feel free to reach out if you have any questions and I'll try my best to help out.

[@OGNILZxJJRises]

im a kid but me and my dad made this and he just put foam on the top for cushioning!!

[@carinamontes441]

Where can I find the printouts??

[@CardboardCosplay]

The link is in the description of the video.

[@mini_jordan]

I love your vids❤

[@CardboardCosplay]

Thanks!

[@mini_jordan]

@@CardboardCosplay nppp

[@agnazareth02]

Hi, my son love this character, I want to try it for his costume, is is okay to you if you share the drawing template? Thank you.

[@CardboardCosplay]

Hi. There's a link to the template in the description of the video.

[@colegahuesudo3544]

The link doesnt work!!

[@Fleegled]

It works for me what device are you opening it on

[@colegahuesudo3544]

@@Fleegled Now it works, thanks anyway for notifiy me!!

[@Cbearbless]

Can you please try and make a darth vader helmet i think it would look really cool especially if It was made by you and also keep up the great work and always know never give up no matter how hard something is

[@CardboardCosplay]

Thank you so much! That's very nice of you. That's a really good idea. I'll definitely look into it.

[@clairdesoleill]

I have just cut off my face and put a TV in its place.

[@void_010-i93]

tf 😦

[@Fleegled]

Are u okay

[@Sans7ry]

Mr. Puzzles irl?

[@chaitusrecipe]

Is it ok cuz i used spray paint

[@CardboardCosplay]

Spray paint will definitely work on cardboard 👍

[@chaitusrecipe]

@@CardboardCosplay ty and I am happy it worked out ty for u r confidence 😀😀

[@CardboardCosplay]

@@chaitusrecipeI'm glad it worked for you! Thanks for watching 🙏

[@TripodLRmine-ds5ln]

That is so cool

[@CardboardCosplay]

Thanks! I'm glad you like it

[@TripodLRmine-ds5ln]

I think I mite make that myself

[@CardboardCosplay]

@TripodLRmine-ds5ln that's great! Feel free to reach out with any questions. Happy New Year 🎉

[@TripodLRmine-ds5ln]

Happy new year

[@monisingh1434]

THANK YOU VERY MUCH

[@Oliva177]

Hi I watched all of your videos I would love it if you made Starlords mask:)

[@Oliva177]

I love the hard work your doing I was having trouble looking for a prowler mask for Halloween and I realized you made a video about the mask and I realized I had the materials to build the mask thank you for the help

[@CardboardCosplay]

@@Oliva177 I'm so glad the video was helpful! I'll definitely think about Starlords mask.

[@Oliva177]

One more thing what should I measure for the prowler mask

[@CardboardCosplay]

@Woopycusin Do you mean so it fits your head? Print out the "face" portion of the template and put it together... just use the paper printout. It's 2 pages and easy/quick to put together. If the eye holes line up with your eyes and it doesn't look too big on you, it should fit and you can print out all the other pieces. If it's too big, decrease the size and check again.

[@Oliva177]

Ok thanks✌🏼

[@driftingthruspace]

1:59

[@Demon-n1t]

I cannot make this can you make this like 5 easy steps please

[@CardboardCosplay]

There are too many pieces for just 5 steps, sorry!

[@CakePlaysJB]

Arynyster Can Pov: BRUH THIS BOY USES TEMPLAATES LIKE ME????? ITS COPYRIGHT?????? (i not hating you)

[@Vexlico]

People who don’t just want to wear it but want to parlize ppl

[@Demon-n1t]

Iam 7 years old

[@griffinmoranofficial]

Everybody spam ‘prowler backpack and shoes’ in the reply section of this comment!!!😂😂😂

[@CardboardCosplay]

🤣🤣🤣🤣

[@griffinmoranofficial]

Maybe someday 😂🤣🥲😢

[@CardboardCosplay]

@@griffinmoranofficial haha! I made 90% of the shoes, but I don't have time to finish and edit it before Halloween. I tried!

[@griffinmoranofficial]

@@CardboardCosplay It’s the thought that counts 😂👍

[@CardboardCosplay]

@@griffinmoranofficial haha! I appreciate that. They're taking much longer than I expected since I need to make both shoes in order to walk in them 😅

[@DRAGONSRock]

Thank you for creating the template. I enjoyed making this for my son, who loves it. Halloween night, we connected with another TV man kid my son's same age and now they are like best friends. You are connecting communities. Thanks. We created a video with the costume. kzbin.info/www/bejne/boXUfnqAm76fZ5ofeature=shared

[@CardboardCosplay]

I'm so glad to hear that! That's awesome. That's such a fun video! It looks like he had a great time.

[@DRAGONSRock]

Also, could you make one for the Cameramen?

[@CardboardCosplay]

@@DRAGONSRock I'll think add it to my list!

[@DRAGONSRock]

@@CardboardCosplay Thanks!

[@Demon-n1t]

I am a kid

[@CardboardCosplay]

Thanks for watching! 🙏