Рет қаралды 11,104
#tvs
#ntorq
#tvsntorq125
#125
#subscribe
Repairing or replacing the belt on a TVS Ntorq scooter involves several steps. Here's a detailed guide to help you through the process:
Tools and Materials Needed:
Socket wrench set
Screwdrivers (Philips and flathead)
Pliers
Replacement belt
Cleaning cloth
Lubricant (optional)
Steps to Repair or Replace the Belt:
1. Preparation:
Safety First: Ensure the scooter is on a stable surface. Use the center stand to keep it steady.
Disconnect the Battery: For safety, disconnect the battery to prevent any accidental starts.
2. Access the Belt:
Remove the Cover: Locate the belt cover on the left side of the scooter. Use a socket wrench to remove the bolts securing the cover. Keep the bolts in a safe place.
Remove the Air Filter (if needed): Depending on the model, you might need to remove the air filter housing to get better access to the belt cover.
3. Inspect the Belt:
Check for Wear and Tear: Once the cover is off, inspect the belt for signs of wear, cracks, or fraying. If the belt shows significant wear, it needs to be replaced.
4. Remove the Old Belt:
Loosen the Variator: Use the socket wrench to loosen the nut on the variator (front pulley). Hold the variator in place with a variator holding tool if you have one, or use a strap wrench.
Remove the Clutch: Similarly, loosen the nut on the clutch (rear pulley). You might need to compress the clutch spring to remove the belt easily.
Take Off the Belt: Slide the old belt off the pulleys carefully.
5. Install the New Belt:
Fit the New Belt: Place the new belt onto the variator first, then onto the clutch. Ensure the belt is seated properly in the grooves of both pulleys.
Tighten the Nuts: Re-tighten the nuts on the variator and clutch to the manufacturer’s specified torque settings.
6. Reassemble:
Replace the Cover: Once the new belt is installed, reattach the belt cover and tighten the bolts securely.
Reinstall the Air Filter: If you removed the air filter, put it back in place and secure it.
7. Test:
Reconnect the Battery: Reconnect the battery terminals.
Test the Scooter: Start the scooter and take it for a short test ride. Listen for any unusual noises and ensure the belt operates smoothly.
8. Final Check:
Inspect: After the test ride, inspect the belt again to make sure it is properly seated and there are no issues.
Tips:
Regular Maintenance: Regularly check the belt for wear and replace it according to the manufacturer’s recommendations.
Use Genuine Parts: Always use genuine or high-quality replacement belts to ensure longevity and performance.
Consult the Manual: Refer to the TVS Ntorq service manual for specific details and torque settings.
If you encounter any issues or if the process seems too complicated, it's always a good idea to consult a professional
Ranomoto & All China scooter spare parts Dilavary..🛵🚚🛺
දැන් ඔබට අවශ්ය සියලුම Ranomoto Scooter ඇතුලුව සියලුම China Scooter වල අමතරකොටස් වෙලදපොලේ වටිනාකමටත් අඩුවෙන් Nilanka Motors අප වෙතින් ඔබ ලගටම ගෙන්වාගත හැක. නැතහොත් අප ආයතනයට පැමින ලබාගැනීමට හැකිය ස්ථානය මිනුවන්ගොඩ google Map Sarch "Nilanka Motors Ranomoto"
අමතරකොටස් සවි කිරීම සහ නඩත්තුව කාර්මික උපදෙස් නොමිලේ.....😍
Contact : 076-9717781
Watsapp : 076-9717781
සියලුම China Scooter සහ සියලුම Scooter හදාගන්න විදිය KZbin එකෙන්
හරියටම දැනගන්න Sarch "SL Moto Gura " සහ "Journey with Nero " Subscribe කරලා එකතුවෙන්න..😍👍
#Nilankamotors #slmotogura #Ranomoto #Chinascooterspiarpart #Nilankanero #Ranomotospiarpart #Journeywithnero #ranomotopattaya125 #gy6 #gy6150 #highlight #Ranomotoscooter #tvsntorq125 #nilankanero #scooterbelt
🙋🏽♀️Let's be friends!
✓ Facebook: www.facebook.c...
✓ TikTok : www.tiktok.com...
✓ WhatsApp Nilanka : bit.ly/46vmSO1