Tweaker Transformed: Unleashing The YD100 BEAST

[@theLyzhendricks]

24:47 😂😂😂😂😂😂 im dyin

[@davidprice2226]

Good video brother u get it running good I seen u take junk and make it good again that what I like about ur videos they are just real merry Christmas to you and your family as well brother be safe out there

[@JMB676]

Thanks brother , Merry Christmas to you and yours too. To be honest I love that about my videos too lol. But yeah idk I just think it’s the most fun. Anyone can take new parts and make something fast or good or aftermarket parts n make big power but taking trash and making a real monster is another level and something I hope inspires others to take their junk and make something cool outta it.

[@grendelsgarage9723]

Thanks for the video. Really cool angle on the ride. I was dying after the boot came off the 3rd time 😂😂😂😂😂😂😂

[@JMB676]

Yo I was dying laughing as I edited it cause I didn’t see him talking to himself till I edited it. It was a good screen for sure.

[@grendelsgarage9723]

@JMB676 pure panic haha thanks so much for the video 📹

[@DarrenRobertson-q7n]

It's really loudbut I like it 😎

[@KenC56mm]

Way entertaining lol. That's a good electrical system!

[@theLyzhendricks]

Thanks for the ride I already watched all ur other vids lol

[@JMB676]

Wow, thanks for watching them. I really appreciate that cause I put a lot of time and effort into editing them.

[@VixFury]

Perhaps move the CDI placement and arrange electrical tape around spark and boot...

[@JMB676]

I just put a new wire and boot on, I have extra n that one was old.

[@MotorizedChuck]

This has to be the funniest ball busting vid you got man. He knows you control the camera angles on the phone? Guess he's not too bright. He gets back, your hearing it on the phone, change camera angle. He don't have a clue vs 3 times outta 4

[@jasonburque]

MSD 8mm suppression wires with angle boots on both ends and you get 8 ,12 ,16 out of the kit put dielectric grease on the ends and out last everything else around it

[@dylanwillyams]

poor guy gettin his chops busted. hope you got him somethin good for the holidays.

[@JMB676]

Yeah, I let him be my friend lol. Jk but I’m workin on something for him.

[@diydarkmatter]

did i ever mention four stroke engines . yeah there great . lol . hey merry CHRISTMAS . to you and the family . say hi to heather for me . and tell benny it was so his fault .

[@JMB676]

Right it was definitely his fault lol. And yeah Christmas is coming and I’ll build a 4 stroke the day after if Santa sends a 4 stroke motor down my chimney……just a thought hehe

[@diydarkmatter]

@@JMB676 lol well i think im in that boat with ya lol . but ill be lucky to get coal . maybe ill get lucky and you tube will stop kicking me in the nuggets .

[@JMB676]

@@diydarkmatter y are they kicking u? Like what’s happening on your end?

[@diydarkmatter]

@@JMB676 they say i have a video that is someone belongs to someone else . i have deleted at least 25 videos i thought was wrong but they wont tell me what one or ones it might be so its a guessing game at this point . i got a few more to delete yet kinda hurts cause there ones that make alot of my views but if i aint making no money what good are they . if they aint the ones then i have no idea and might just delete everything and say screw them .

[@JMB676]

@@diydarkmatter didn’t you have one where you tried to do a GoFundMe for somebody? If so, I don’t remember but didn’t you put some of their video in or something like that maybe it’s that one

[@leonardarola]

Lmao. Thanks for the ride.

[@theLyzhendricks]

Man im sad about my spark plug i was ganna get my buddies bike put tougher and then gobfor a ride but i dont know if my motor will run with the air passing by the spark plug

[@theLyzhendricks]

Turns out even with a huge air leak at the spark plug it still runs

[@JMB676]

Is the whole stripped?

[@theLyzhendricks]

@@JMB676 yea

[@DarrenRobertson-q7n]

He don't even stop and check the bike. Lol

[@Op1zilla]

Lol, Merry Holidays, Bike was Moving, 👽👍🏻 If you can retard your timing it will run even better 🚲💥💨💨💨

[@DarrenRobertson-q7n]

Lol lol good for him.ayoaint that the guy lol

[@DarrenRobertson-m3q]

😂😂😂😂😂I guess that guy will never get it lol you feed him a apple and he probably he wouldn't to think let's stop and put so😂😂😂😂me tape on it 😢

[@nickturner3918]

Big gay Benny is hard on the equipment always breakin things I’ve never broke one of thos carbs before they fit real nice on a oz Reed or a shorty intake should ask bikeberry for a oz Reed I bet the thrust pipe would work better with reeds

[@JMB676]

He is very hard on stuff, but it makes funny content at least

[@keithaustin2917]

You put too much pressure on the tension spring obviously it's going to bend that little pin there is no support on the exhaust pipe either so all screws on the engine block will strip out in time not good at all especially when the vibration why didn't you put a clip round spark plug boot to stop it coming off or plastic tie you never seem to keep the wheel bearings lubricated even though you do a lot of miles it seems to run dry then you wonder why you get trouble with all your wheel bearings you maintain the engines but you don't maintain the wheel bearings a bike normally only goes between 15 and 20 miles an hour and you are going a lot faster than this so they need lubrication

[@JMB676]

First I gotta laugh bud, what makes you think I don’t lubricant my wheels; cause I don’t show it in videos? It’s boring and I just don’t video it, but I open them up about every two months. Also I don’t wonder at all why I have rear wheel (only) issues, maybe you do but I don’t. I ride a lot and I’m heavy and my bike is heavy and the trailer I pull is heavy and I’m doin this all on bicycle wheels. So there’s no wonder why it happens. And as far as everything else feel free to do what you want to your bike and once you post it for all to see I’ll check it out and see how it works for you. But till you build as many as me and put as many miles as I do trouble free and with the power mine makes pulling as much weight as mine does then feel free to offer as much info to me right after I post a video asking for opinions. Till then I just hope you enjoy my nonsense and unless I say hey guys this is how you should do it, just do it your way. I don’t know it all by any means but I know exactly how to get 30k miles out of each bike each year with lots of abuse. But thanks for watching.

[@keithaustin2917]

You should treat yourself to at hour metre then you know how many miles your engine has actually done your engines don't seem to last very long you are always seem to be repairing them all the time you don't seem to give them chance to run in soon as you have built them you seem to want to go fast

[@JMB676]

@keithaustin2917 yea I have a clock and the majority of where I ride at is reparative so needing a hour meter isn’t necessary. I can get an accurate estimate of how far I ride. Like jokester, I had it together for just over a year now and haven’t had an issue with the motor since I got all the bugs ironed out of it last November. It’s easily got 13k on it. Mostly cause I just haven’t been riding it as much cause I been working on others bikes and build different projects so I ride those a bunch. But jokester is my only daily. Everything else is just for fun and not taken seriously as a reliable bike. This bike Tweaker had around 15k miles on it and the rear wheel was all I fixed. I only took the motor off cause it had so many miles and knew it was tired. I mean maybe you can’t get your motors to last or something, idk; but I just don’t have that issue. I’m guessing you don’t even have a bike with a motor and if you do it’s all stock cause of some of the stuff you said in last comment. But like I said brother feel feee to post it and tag me, or post it in my group cause if your having trouble gettyyour bike to run well and be reliable I could definitely give you some pointers cause I get LOTS of miles out of my builds.