Twin Turbo C6 Z06 Build | RPM S7 E13

[@MichaelBacon212]

We may call him angry Eric but he does some amazing work and is a master of his craft. Hats off to you Eric and great work man. As always.

[@ecannon649]

As a full time auto tech for 29 years and a C6 owner, I can say that is great workmanship on that car. I can tell they take pride in their work.

[@norcaldailydriven]

The packaging on the whole setup is so badass and stealth! One hell of a build!

[@foxrodx2757]

That is the baddest car I have seen on your channel! I love it!!!!

[@erikjeffery5202]

I try to watch all the posts. This one and the format was the best one you guys have put out. Love the 1 car focus with the story behind it. Nice work.

[@icurt06]

Nice work Eric! That is one bad @$$ Vette

[@SouthwestSpeedLLC]

23:56 - Best part of the video and says it all.

[@gshepherd86]

My FAVORITE BUILD FROM ALL SEASONS!!!!! This just motivated me!!!!

[@aarondowns4500]

Absolutely savage as hell, my jaw about hit the floor when the dyno pulls started. Bow tie for life!!!!!

[@jeffclayton9968]

You guys hit that one out of the park. Nice work Eric.

[@FChuckT]

No doubt, Eric and RPM do some amazing work. The attention to detail is stunning.

[@red03vette]

Wow! Amazing build and workmanship! That is one crazy Z06! 👍🏼👍🏼 can’t wait to see more.... 😁

[@sraldiris]

Does my heart good to see Louis’s car back up and running meaner than ever! 😎 #RPMFTW

[@paulrhame9634]

Angry Eric deserves a raise !!!

[@mikebiernat1604]

RPM you're a force to be reckoned with

[@SNELLERIZED]

VERY nice change of pace!

[@jerryblum7098]

Great job Eric. Fran and Bill, I believe you guys have the best corvette speed shop in the country. Hey Steve, I am waiting for some videos of Frans C6 at a drag strip. Thanks Steve. Great work behind the camera.

[@recheveste31]

Mad respect for this shop !

[@Sandkei]

Eric looks like a proud Poppa & he should !

[@srninjastar]

this got me motivated to get my single turbo kit going with the vette. can't wait to hit boost in dat biiitch.

[@zeekster6969]

I hope Eric is commpensated well, he certainly earns it!!! proud as a peacock sittn in da trunk listening to his handiwork👍👍👍

[@steveaustin5897]

That's friggin SWEET!!!! Eric, don't forget to call your Mother!

[@savagemt2]

Some good clean work on this car! Ive been following him on instagram for many many years. Glad to see it back up and running.

[@DarkKnight-ws3wx]

That is how work should be done extremely professional and stealth. That thing is a monster

[@slowvette7189]

Been a while since I’ve watched a video on anybody’s channel from start to finish. Good shit guys. Beautiful build and beautiful video!

[@dragbiker1]

WOW!!! What an impressive build!! When my warranty expires on my V3 I'm going to have to come see you guys.

[@rggt6225]

Now that is some professional work clean clean clean good job RPM

[@JLC87420]

That is some bad ass work. Fantastic job angry Eric.

[@superslacker6152]

Beautiful build, thanks for sharing. Not many shops can build a car of this caliber

[@wfox_914fox5]

Great build. Great video.

[@venomws6]

I'm not just Pizza you know !! LMAOOOOOOO Congrats Louis badass setup and work RPM looking forward for the fun stuff

[@Jbrice9]

That thing is beautiful nice work by everyone involved and boosted enjoy man!!

[@SuprSl0]

The final pull with Eric in the trunk looking unamused.... Great work all round, RPM!

[@platinumman21]

Sick build guys! Nice work also Eric. Can't wait to see more on this car.

[@gregwilliams4380]

All I can say is that is a bad ass setup

[@josegerman8877]

RPM did it again...DJ Khaled Voice "ANOTHER ONE"

[@nigelgrant1415]

This is my favourite rpm build, just ultimate stuff here, super sweet!

[@georgem.6136]

Wow the car made awesome power, Really want Fran to setup my Dominator & tune my Nova, might have to ship my car there! The Turbo system / inter-coolers are super efficient!! Eric did a great job, that's a lot of wiring & tons of work! Cant wait to see it at the track, I have a feeling Joey is going to be adding more Nitrous to his car now!

[@davidbrown6193]

Yeah!! Full On!! Mech food for us guys!! Thanks RPM

[@dawnvasquez1139]

Looking for a c6 or c5 for sale...you guys have like a list of projects 4 sale...or rolling chassis 4 sale?

[@Kbhatti604]

Definitely the best episode ever and man am I ever in love with this car. Such a stealthy twin turbo setup. Sick, just sick. Well done boys.

[@jsmith1210]

Amazing build, well done!!

[@keefespencer1173]

First things first Fran is one hell of a salesman telling a man to change his IG name or get boost so instead of a few strokes of the keyboard the guy opens his wallet and says ok here's my car and here's my money do what you do lol and I have to say this is one if not number one on my favorite cars list of cars to come out of this shop perfect car and set up in my book

[@stevebrumm5826]

Was wondering who that was chillin with angry Eric in some lawn chairs! Saw you guys cruisin the strip. I have an 11 Shelby but your channel religiously love the builds

[@roadtrip942]

Need Turbo’s on all Z06’s, very nice build

[@hotrodder5034]

Nasty Vette!! 💪💪💪💪💪💪

[@DutchZombieSlaya]

nice to see boostedc6's car on here instead of instagram!

[@DutchZombieSlaya]

i mean that in a positive way. my english sucks.

[@alonsoperez9012]

Amazing build, looks like a lot of time, money and skill went into it! Great numbers as well. Now I'll just sit back and read the internet car builders opinions on what you guys should of done. Even though they have no idea what it takes to build something like this lol

[@davidconley3610]

Damn! Great job Eric!

[@Tain950]

Is this an actual LS7 engine or did they go with a completely different block. I’m asking because I’ve mostly been a JDM guy and don’t know much about the LS platform

[@ishuag]

Well built car with all the supporting mods RPM FTW!!!!!

[@deathzr1158]

Keep up the great work. My fav build yall did so far.

[@alex369]

What a gorgeous beast ;)

[@LineMUp321]

Side note, ever thought of putting the RPM logo for the shop on the oil cap for merch?

[@jetcity7156]

That is truly a masterpiece! Well done!!

[@BB-fv2dw]

Clean work sweet 👌

[@Francis_von_louie]

Beautiful car and a really nice build, great job guys.

[@automac1361]

What’s up with the blue C5 on the dyno and short clip at the end of the video

[@Kawaii_Life.]

Keep up the great work guys 👍👍

[@tonyfranco516]

I recently acquired a stock 09 C6 Z06, yeah it’s hot, I do PDI’s on ZR1’s and IMO it’s a beautiful beast. But this is one sexy monster.

[@jimmyg8338]

Should've had McFarland Fab Shop do the turbo set up

[@aaronfisher7159]

Jimmy G I hear they’re booked up till next year at least

[@hidog420]

WOW! That sucks that the first guy took so long but it looks like the job he did was pretty solid? Finished product is a masterpiece...

[@richiekirk4132]

I picked it! Drivermod!

[@dustinmcgovney7684]

Take that duster and throw it in the garbage. Lol

[@georgem.6136]

I was wondering what happened to Pizza's boy car! That is a sicks setup, i have never seen a cold side like that! Absolutely bad ass build!! Louie had to deliver about 500 pizzas to cover the cost of the upgrades!

[@louispepe6286]

George Mitchell not actually a pizza boy 🤦🏻‍♂️ lol

[@georgem.6136]

@@louispepe6286 , I figured not lol!

[@knuckleheadtv7155]

That cars fckn awesome!!!!

[@josephmendozajr8993]

Damn great video

[@adamshawjr1183]

Yep. I want a twin turbo c6 now 😅

[@mxrco04x]

This thing is sooooo beautiful 😭

[@Joeshomegarage]

Pizza guys are killing it in Delaware!

[@mr.roush6709]

Nice job guys!! That thing is BADASS

[@matthewrandall915]

Worth the wait 👌

[@davidbentley6399]

Is the RPM Transmissions that you all work with from Anderson, IN? I drive by that shop several times a week.

[@davidbentley6399]

@@RaceProvenMotorsports Sorry, I should have worded it differently, but is the RPM Transmissions that you ship stuff to the one located in Anderson, IN?

[@RaceProvenMotorsports]

Yes that's the one!

[@MrRECKLESS3167152]

He Got Big Money

[@larrynewberry3500]

That is one mean M F'en build and its not done yet. Scary.. Great job.

[@snoopergnar3719]

These videos never disappoint.

[@godspeedsendit9610]

What’s the retail on one of those

[@alonsoperez9012]

You know what they say... if you have to ask. You can't afford it hahaha

[@tonyfranco516]

...”more than you can afford pal, Ferrari” revs motor....”smoke’em”

[@LineMUp321]

This is how it is done. A lot of hours BUT worth every sec/penny

[@minitrucker04]

That is just plan nasty!

[@ls1transam87]

Great episode

[@jeff4air985]

This video is NSFW. Can’t get up from my desk...

[@erick5598]

Amazing amazing build!!

[@jeremycts-v2013]

God damn i need this!

[@moneyandtimefreedom3352]

How much did the car weigh when all said and done?

[@toddclark332]

Badass job badass car good job guys you boys Rock

[@robloose3360]

Nice work

[@juiced71]

You guys have great vids! This one is top notch ! Really cool to see the planning that went behind it! That looks factory! Attention to detail 👌🏻👌🏻👌🏻frank rizzo I said! Haha

[@matthewtharp1946]

🎶 A car pulls up who’s cam it be, a fresh C6Z rollin twins N 80% E🎵. 🎶Then I jizzed in my pants🎶 if you know you know.

[@dizzytt69]

Why so little boost? was it knocking? I was hoping you were gonna get like 1400hp!

[@RaceProvenMotorsports]

Stock intake manifold. We just got a new one and will turn it up soon

[@dizzytt69]

@@RaceProvenMotorsports Ah! that makes much sense, thank you for the reply!

[@thatruth6488]

What kind of jobs do these guys be having? To Afford this type of stuff It must be nice cool!!!

[@95imp3059]

Im gonna buy Fran some damn glasses! 😂😂😂

[@TheFi1thyCasual]

Very nice work.

[@Yabnhiel]

why not go for sequential ?

[@colinwahl2509]

The California car scratcher makes an appearance

[@adams733]

Soooo, when are you gonna go back and launch at 6500?

[@Drokkers]

Fran.....without a hat on. 😳

[@BillStraub303]

NICE REALLY NICE!!👍👍👍

[@ryotaryuu]

He's been here for years.

[@IKE-Auto]

Turn it up just a little more......😈

[@Gr33nShirt]

That was a cool video. Sucks that it got stuck in the “wrong hands” for a while. Been there. Keep up the good work. 🥃