How to make over 1000hp With a TURBO LS!!!!

NEW ONLINE STORE!!!
lsnasty.com
lsnasty.com
Follow The LS NastyChannel: / lsnasty
@ls.nasty
LS Nasty
700 N 13th St
Erwin NC 28339
Subscribe, comment and like
Follow Me!!!
Facebook: / johndocyt
Instagram: John_Doc1
Instagram: cowmaro
Instagram: LS Nasty
DEVIN's CHANNEL.... HOLLEY INFO!!!!!
/ boo00st1125
Check out Moore Race Chassis
/ @mooreracechassis
www.qa1.net
deterscustomfi...
www.tkmperform...
www.motionrace...
www.texas-spee...
strangeengineer...
www.trzmotorsp...
huronspeed.com
www.trickchass...
For all Apparel Needs
www.nctrophyca...

[@dogman_]

John. You make it sound so easy. Most of us on here can't just drop $6K at once, so we have to go to mom and pops that's going to charge us less.

[@That_ac_dude]

You build cool stuff for sure but every video of yours I’ve seen I end up skipping cuz you don’t stop talking lol.

[@bryanmayes9234]

That's why I unlit my bell, I forgot bout Jon doc for 3 years until this video and this is the first comment I see

[@cammer68oliver2]

Beautiful beast there, bud! Made that mustang a real ride! Dropped a pushrod smallblock between the fenders like ford shoulda done from the factory.

[@B-Nazty]

Love the content and shop videos broham. Finally able to take a break and watch some KZbin. I’m down in Cape Coral Florida, got hammered by Ian. Thanks again for your help!

[@grahamerosewarne6656]

Gotta just do it right from the first place John 👍💯 Aussie Fan 💪🇦🇺🆒

[@danielbates211]

That bowtie tho! Bbwwwaaahhhaaahhaa LS NASTY FTW!

[@boostedthirdgenracing]

I didn’t hear you mention anything about fuel pump and injectors make that thousand horsepower

[@JohnDoc]

Bosh 210’s

[@harjodhsidhu5345]

Decap stock truck injectors

[@gregorygamble7972]

Hey John can you tell me what intercooler you are running on the set up?

[@robertaranda7371]

Black Trans Am in the back round? Boosted Rooster??

[@jdubcbr600]

What kind of lift is the cam? I may be having a similar issue and need to switch to .680's.

[@Chuckdiesel71]

I see the stock barrel coils. Which of the MSD Coils would you recommend also? Seen a few of the other builds have them. Wasn't sure which you use though also?

[@Antoine_99]

It’s common knowledge across most platforms that Oem coils are the go to for even the wildest builds. They might look nice in the engine bay with the fancy ones, but most perform best with Oem.

[@WilliamMeece-hc1rx]

What's the most power made out a 408 cubic inch 6.0 ls based stock block

[@bubbakushingtonIII]

Is that bow tie off of square body?

[@mickhirk4734]

John what injectors and fuel system are you running?

[@marcustrujillo4641]

I saw him comment on another comment that he uses Bosch 210s

[@markdonovan9247]

Another great video!

[@frankietyndall9595]

With arp studded bottom end 317 heads what would be conservative goal hp and boost wise to live long. Also have all other arp bolts and aftermarket balncer??????

[@frankietyndall9595]

Also btr stage 3 cam .740 pushrods and trunion upgrade

[@frankietyndall9595]

@@bigboreracing356 its not all out race care street and strip not trying to go in 4s

[@ALEX.THE.RUSSIAN]

Your videos are very very dope now! Good job!!!

[@Funkyflykiwi]

How about summit racings stroker kits? Heard anything about them? They say tested 1200hp

[@roberthandy9420]

Come on JD you know you like the texts let’s you know people are watching your videos 😊 be glad to see you racing soon fixing to get cold and nobody races up north 😮stay safe

[@skworthington95]

Sweet ride man! My dad always said LS was the engine for dummies 😂

[@juniusjuvenal9898]

long live the dummies they will inherit the earth

[@9thgatedim273]

John whats good if u could help me with a street 4.8 stock bottom end with stock 862 heads any good turbo Recipes for my 55 post 210

[@UcantBeSerious03]

never mentioned what size turbos

[@2016scatpack]

Hey brother what intake is that?

[@texanboi9343]

Wat about a 5.3 or making a 383 with forged buttom end with the lamb cam 🤔

[@texanboi9343]

@@bigboreracing356 I dnt like big blocks lol sbc for the win 🤷🏽‍♂️😂

[@texanboi9343]

@@bigboreracing356 im to broke to afford a BBC lol

[@HairlipButcher]

A 383 stroker is like a big block. At least the old school 383 strokers with a big old 4barrel carb na of course. Back when they only have 5 wires on the whole motor.

[@HairlipButcher]

@@bigboreracing356 ok... I would agree that over 100ci would make more. But we r all entitled to our own opinion. And I think its more fun with a high reving sb compared to a big block. Not to mention parts available for a small block vs a big block. U do ur big block thing. Don't get ur feelers hurt next time a sb pulls away from ur bb.👌💪🇺🇸

[@texanboi9343]

@@bigboreracing356 buying suspension part an rear end part for my gbody and have kids

[@miker6492]

Hey John, asked this before... What do you use for throttle bodies? I've tried Chinese and fitech with no luck. Got any recommendations on a TB for street use?

[@patrickmansfield3967]

I’ve been using the WARR throttle body and no issues with it.

[@miker6492]

@@patrickmansfield3967 any whistle or IAC noise?

[@OmarE36M3Turbo]

What turbos are those ?

[@JWoody1990]

Do something with that brake fluid resivor cap! LoL

[@silentmisfit]

Hey John,in the video you say that if your using a johnson linkbar style lifter and adustable rocker,are adjustable rockers needed with johnson linkbar?

[@rileydalton3958]

I can chip in on this. No not needed just custom length pushrods most likely

[@ryanfield4966]

When y’all going to do a coyote?!!!

[@ryanfield4966]

@@bigboreracing356 what?

[@ryanfield4966]

@@bigboreracing356 well never did I say it wasn’t. I agree it is I was just asking a question. You must be one of those kids that eats tide pods?

[@ryanfield4966]

@@bigboreracing356 well now I know all I need to about you

[@robinwendt5527]

Yup I've been buying parts that you've recommended for years now...yes even most plus pumps. Lol I'm getting ready to order the big stick for my aluminum 6.0l now they just need to get on a blower cam b4 I get my whipple. I don't really race I just like fast street cars on slicks so I can't just buy everything @ once

[@robinwendt5527]

@@bigboreracing356 oh I know that but I'm mostly building a old school street truck

[@carlosv.118]

Does this car have a mini tub

[@kylelarison2316]

get the bad apple done

[@trlprk]

It’s easy, just not cheap. So it’s easy for those that have the cash. A story as old as time itself

[@ianhowe007]

A stock parts bottom end and partially filled with concrete can last a long time

[@kenshinhimura9387]

What kind of clown puts concrete in their engine block stop being cheap

[@bbcnova56]

LY6 twin 67s in a 3800 pound nova. 12psi 6.1 @ 117 in the 8th. Multiple hundreds of street hits and driving over the last 2 summers with no issues. Next summer looking to go 8s in the quarter on 18 to 20psi. Stock bottom end with ring gap. kzbin.info/www/bejne/gWjTk4F3oqpnn9U

[@billdavis9350]

What intercooler is that?

[@g-rock6329]

Is it cool to make the LS stock everything to Make say 600 or something close to that and it last a decent amount of time just driving around town and playing a lil bit. I want to start my first project motor and learn as I go

[@harjodhsidhu5345]

Made 700whp on pumpgas on a mainline dyno. Stock junyard lq4 with 80mm

[@Pygmyz06]

3:56 I wish it were no questions asked but he kept asking how I was gonna pay for it 😭

[@Cultofpersonality09129]

95% of the people that want 1000 HP don’t even need much more than 1/2 of that. 600rwhp in a fox, on the street is Wwaaayyy more than enough HP. So many people want to use Dyno numbers to justify how fast there car goes. A SBE LS will live a long happy life at 600 to the tire with a 7875 turbo provided it’s turned properly.

[@alexanderrodriguez4253]

How does an L33 compare to the LC9 ?

[@DesTakeFlight]

What’s going on JD, I watch your videos all the time u have great content 👍🏾, But question what size turbos did u go with? That was the only thing I didn’t hear u speak about if u don’t mine sharing? Also that’s outstanding u made 1500hp with a Callie’s comp star crank and they say it’s only good up to 1200hp & u surpassed that with no problem with no motor problems 🫡👏🏾👏🏾🫱🏽‍🫲🏾. Im building a LS/LT BUILD OUT OF THE new L8T iron block. This video gave me great confidence with that crank now! I appreciate the info bro 💯🙌🏾👏🏾👏🏾👏🏾…

[@horsefly1020]

Is a 9513 aluminum block good?

[@leboperformance9711]

So is the 5.3 the motor to go with or 6.0? What's the real deal here?

[@ronsgarage2057]

In the words of Richard holdner...there is no replacement for displacement

[@leedoss7904]

One Bad Ass Hot Rod !!

[@TXSS210]

What fuel system, and what kind of fuel?

[@madeinatlanta--3]

sounds great John but can we see it after a few passes to make sure your correct lol

[@JohnDoc]

Already put 10 on that bad boy

[@madeinatlanta--3]

@@JohnDoc 10-4

[@timothygoodsell1446]

Great info. I don’t wanna bother tkm but what would b a ballpark amount on it turn key? 20,000 ? Anybody?

[@LsxDain573]

Go to their websites I believe it was close to $20k

[@timothygoodsell1446]

Thanks

[@Tazerect]

What 6.0 block lq4 or 9

[@armdrop101]

If u can make 600 -700 whp with a old gm stock steel sbc style crank. shouldn't have a problem with ls Keep revs 6000 to 6500 won't ever hurt it. Dunno why guys turn these v8s 7500-8500 rpm dont need to.

[@franzv3172]

Came here to learn about your fuel setup 😅

[@derekgrubbs117]

Wht turbos are those

[@Fatt-billy.racing]

i dont know the weight of the car but looks 3200 to 3400 and at 1500 hp you should be about 4.70s or 80s if the track is on point

[@BEYTEK]

simple but not cheap thats for sure.

[@Fatt-billy.racing]

whats wrong with a ls 6.0 nitrous motor

[@straightuptrucking]

Sheeeesh

[@squarebodybuilder]

Thank you

[@dannycoots9503]

Pretty cool

[@Hijunk71]

How much hp can you get with the ls2 block?

[@85_montec]

Yessssirrrrr

[@ricktokle5848]

😎🇺🇸👍Sweet!!✌️

[@timweb1510]

If it’s so simple, why go with a built tkm and not just straight to the junkyard? Other than your sponsorship and biased opinion right?

[@JohnDoc]

Cause the machine work makes the difference. No one can do that kind of high quality machine work like tkm does especially doing it themselves

[@timweb1510]

@@JohnDoc I have confidence and trust in all your shop mechanics that do the work that you don’t. We watched your upload for the budget on this car, you are being disingenuous to your loyal viewers. 99/100 people here don’t have funds for that tkm engine and you wouldn’t buy it either if they weren’t a sponsor imo

[@SLOGOAT219]

$6500 most ppl can't afford?? This is the 6500 package with added oring which I doubt adds much cost. I feel like that is a very obtainable short block

[@timweb1510]

@@SLOGOAT219 too expensive compared to the $3-500 complete engines

[@brianbailey5720]

You have track cred Jon. Street credit no sir.

[@BillyP-49Chevy]

Truth, facts, people we are now on a conservative channel. The thumbs are going up.

[@0922jus]

My favorite question when you build something like this. What kind of gas mileage does it get? lol

[@fat_cat8457]

Do you think he built it for gas mileage? Cuz idk man

[@jus1975]

@@fat_cat8457 i Hope you got that this was meant as a joke

[@zx6r1320]

not the best but not the worst

[@AndrewH9999]

❤️‍🔥

[@R26Roman]

I get LS engines are cheap but I don't why Chevy guys get all butt hurt when coyotes can make high HP stock boosted. LS engines can make high HP on boost but it isn't just stock they need some support. Even with support mods yes it would be cheaper then a coyote swap. But coyote engines are getting cheaper and cheaper.

[@zx6r1320]

My motor is a gen4 iron block, eagle 4340 forged crankshaft and H beam rods, mahle powerpak pistons 11.1 compression, 317 heads cnc ported with btr valve train/ls7 lifters/chromoly push rods ect. 6 bolt main caps , 4 bolt heads, all arp bolts through the entire motor, E85 pump gas id like to make 1200-1300hp turned all the way up. Is that doable?

[@buckedup99]

FIRST!!

[@jasonhastings5538]

How can i make 500hp??? 🤣🤣🤣🤣🤣

[@jimmymccormick142]

The very best way to make 1,000 horsepower to the tires is a illuminator straight from Ford twin turbo positions and she make a thousand plus

[@TroyPatterson310]

Putting people have run over 1000 for multiple seasons or sessions.. they can last

[@joshuacrawford4319]

😊😊😊

[@iiStalkii]

Links to the actual fucking product holy shit

[@JohnDoc]

Use Google. I tell u what u need. Now find it… what do u want me to build the car for you?!

[@iiStalkii]

@@JohnDoc nah bruh I used google but there’s different tsp 4 inch shafts(forged gen 5 standard snout & long snout or stroke forged) and a person with limited knowledge doesn’t know the key differences between em. Didn’t even bother watching the rest to see if I’d have to deal with that again.

[@iiStalkii]

@@JohnDoc a simple I put in the (insert name here) I wouldn’t ask for the link and googling it would be enough

[@iiStalkii]

@@JohnDoc u could easily make money of affiliate marketing with these companies especially if you show them your viewership

[@xxdevo2685xx]

More track videos plz vids are getting repetitive!

[@rafatrill]

Just takes a lot of money duh

[@bigpetie66]

You say give KTM a call but every time you call you never get anybody all you can do is leave a message🤷🏾‍♂️🤔

[@killercoyote1905]

Coyote the only motor that will live at 1000rwhp totally stock. Mine been living for over a year racing nearly every weekend

[@mitchellholroyd2837]

Third

[@guyfmcarolina968]

What Happened to your Camaro John….