Twin Turbo Mr2 Gets New Coilovers!

Be sure to subscribe! ► / boostedboiz
Merch ► boostedboiz.big...
Facebook ► / boostedboiz-1696272047...
Instagram ► / boostedboiz
Personal Instas:
Kyle ► / boostedboikyle
Emilio ► / boostedboiemilio
Brent ► / pfispeed
Check these guys out!:
Pfispeed ► pfispeed.com/
Huxracing ► www.huxracing....
Street2track ► www.street2trac...
Want to send us something?
Boostedboiz
PO Box 1357
Loveland, CO 80539

[@robhadwen4585]

Anybody gonna talk about how accurate Kyles guesses are?

[@Bot_Brad]

Rob Hadwen yes he guesses after he weighs them.

[@robhadwen4585]

Ligma balls

[@dookiebooger9967]

@@Bot_Brad lol probably right. Or he looked up all the specs before saying anything and just wanted to flex on us all. Them Kyle's be shiesty like that

[@seanmcclellan3369]

"junkyard didn't have any?" 😂

[@Redbluegreengo]

That strip where the bumper doesnt meet the rear fender or the trim, bugs me so much whenever i see it 😭😭

[@exotichandyman]

#metoo

[@seanhenderson9018]

When people call quarter panels rear fenders bugs me so much.

[@dookiebooger9967]

Damnit now I can't unsee it

[@apexaero]

not bolted, holes don't line up either,,,,,,

[@rebaouihichame9898]

put a cover on the red car plz

[@miatafan]

rebaoui hichame put a cover over all the cars outside, it’s a gravel driveway, kicking out dirt and rocks everywhere

[@dylanmounsey7515]

Meh. Couple months of dust ain’t bad

[@josephfreeman1427]

Im shocked all this is not going in the red car

[@MichelVermeulen2612]

@@josephfreeman1427 Red one becoming a daily I think.

[@freedomfox8183]

@@josephfreeman1427 he doesn't want to cut it up like the white one.. it's for a daily not racecar ...

[@miatafan]

“We already have all the bolts lose” camera pans over to Roman.

[@waterloo123100]

Seems like to me Kyle’s getting tired of “Mechanics” in the comments. This this shit takes a lot of time and Money and it doesn’t just happen overnight. I don’t like everything Kyle does but you don’t see me trying to tell him how to run his shop. Your the man Kyle keep up the awesome work I wish I could do. 👌

[@jameslastname9171]

Who else was surprised to see that all the nuts were installed on the old coil overs? Loose, but all there!

[@freedomfox8183]

Loose because when he painted it

[@ianbalongay]

4:30 "Out with old, in with the new" Lol that's some Chrisfix shit right there.

[@zmuse]

Hey Kyle, you can order more than one part at a time :)

[@dougn420]

Thank you this tjing is just being dragged outta

[@CrippledKev]

he has all the parts he is just dragging out the content.. that team including pfi could of had that thing together yesterday

[@MannyDelReal]

This car ain’t going to be faster than the prelude 😂

[@allspooledup2584]

Kevin if he had all the parts he would be at the track already. No way he could hold off on the build just for content. I’m sure he’s dying to drive it. I sure would be...

[@leviwyatt5921]

Want to pay for all the parts at once for him?? 😂😂😂😂🤦‍♂️

[@alejandroguillen1159]

Rewatching these vids cause y’all didn’t cut any corners! That corner balancing is key. Props to Kyle and this whole channel as a whole. Amazing builds coming outta boosted boiz garage !

[@jensmannens7398]

Is there something that milwaukee can't get loose? That thing is POWERFUL AF!

[@xalr6128]

milwaukee is the absolute best

[@josephfreeman1427]

I got 2 of them the big one will break shit if you dont know how to use it

[@calebpeterson8322]

Probably my favorite tool I have lol. Taken off everything I've ever thrown at it so far

[@raganyang4968]

I prefer my Milwaukee's over any of the big 3

[@freedomfox8183]

I just got the 1 inch battery impact at work to try out and it's a beast I took off all the dump trucks tires and was able to put them back on while only using 1 bar on the battery it's as strong if not stronger than our old air impacts and way more convenient

[@CMSandRMO09]

I am going to send you a check list note pad. Every video you say “we still need to order...”. I am ready to see it on the dyno!!!!

[@marcasswellbmd6922]

Wow send Me a Check Cause I'm killing myself Working Hard as hell everyday to make sure all of us Have Internet, to even watch this Shit!!!!

[@blasterracer817]

@@marcasswellbmd6922 you realize he said check list note pad. Not an actual check right.

[@Bradders-ik7bl]

@@blasterracer817 pmsl

[@marcasswellbmd6922]

@@blasterracer817 Watch again He said some one said They would right him a check for what ever he need's.. Watch whole video.......

[@freedomfox8183]

Do you realize how much money is already in this build just between the engines and transmission and axles? Pretty clear youve never built shit yourself and spend to much time in the fake YT land .. this is a real channel and real builds take real time.. hell some shops take up to a year to get this far and he's been traveling the country for events and drag racing while still building this .. there's no deadline or rush he's got 3-4 turbo cars already and you don't rush the things he has left after doing everything else right..

[@numlockkilla]

I would be doing it just like him. And it's on Kyle's schedule. Not the pot sitting watchers. I like content myself. Think what it cost for this vid. Regardless of discount. I dont see the complainers spending 30 g on a build and vlogging it. People need to slow their roll.

[@Van_wints]

Idk if people can understand exactly the extent it takes to hodgepoge all these different brands and see wnat you wanna use and buy everything. That tranny is sick and took a lot of research to decide on. That motor with a 4 piston head and built internals is absolutely nuts. Then a pcm for wiring inside and bits inside. It really is a lot. And the only pace is the pace in which it travels. Its hard to find time for projects occasionally and some stuff looks miniscule and stupid but necessary as per build.

[@ThomasWilliams-uq9lo]

Don’t forget all the time it takes to video the progress and editing after that. Some people just have to complain about everything.

[@snikwad003]

But but butt you mean he doesn't get all his shit for free.....people are wild

[@fg2_sc718]

Do you have any idea how much $ he makes off these videos???

[@numlockkilla]

@@fg2_sc718 enough to live comfortably. Which I'm glad he does. I could only dream of being able to hang with Brent and everyone else that's BB and PFI. I'm happy waiting for what he does and just because he makes money doing what he loves doesnt mean people need to hate cause he is making money from doing what he loves. If you dont then change it. It's all perception. His job isnt easy. 780 thousand people look at his every move. More people watch him than the president. Imaging 750k people watching you make cheese sandwiches and driving your la baron. So if you want some sausages then quit that cheesy job and do something about it. Worse thing you can do is be unhappy again.

[@allspooledup2584]

Should get a real sheet metal race wing built to hang off the back of the mr2. Not only functional, but looks really good too

[@Bamberger25]

on a car which probably will wheelie and is build for Track??? Not very usefull

[@allspooledup2584]

Bamberger25 a wing that’s built for drag racing isn’t useful at the track?? Ok then...lol

[@Bamberger25]

@@allspooledup2584 No it is´nt. Its usefull for more traction on the rear axle, but if you dont need more traction its slowing you. And its definitely not usefull for a car that has issues on the front axle.

[@allspooledup2584]

Bamberger25 and you’re assuming is has issues on the front axle before it even makes a hit?? My mr2 still gets loose in the rear all the time, and I’m not pushing 1000hp. You owned mr2’s before I assume?

[@Bamberger25]

@@allspooledup2584 I´m just assuming because of what Kyle says in this video.

[@eel1331]

PLEASE MAKE A GRIP BUILD! fast spool turbo and lost of grip and stiffness!

[@xandercalderwood726]

Why didn’t y’all do all this when it was sitting for 8 months😂

[@KingJhase803]

great question

[@leviwyatt5921]

They're waiting on a harness, and they were waiting on axles. What's the rush?

[@raymondself333]

Yeah been draging feet on this build one video for that. Get real

[@raymondself333]

@@leviwyatt5921 the rush no rush but. Content been shity

[@leviwyatt5921]

@@raymondself333 lol literally every single automotive youtuber in existence installs one part per video. Idk what the difference is.

[@gtgodbear6320]

Those coilovers are beautiful. I oughta get the same set for my CRV. I need to find some decent used rims first.

[@Xe99]

“Who was back there?” SHANE!

[@EDWARDTREVEY]

The "Mister 2" is coming along so nicely you are doing such nice work!!!

[@tedbear631]

11:15 Looks like my car when I go to get groceries x'DDD

[@tinoracing7]

You ever heard of weight transfer and a rear wheel drive vehicle you need to bring the weight from the front on top of your tires so the more resistant you got a front the longer it is for the car to hook so think about where you going to put that battery

[@b-roll4881]

You guys are forgetting that it is a rear engine car. most of the weight is already over the tires. Kyle still needs to be able to steer the car off the line. This car is going to want to lift the front off the ground as it is.

[@LOLking-qg2bj]

Would like to see a update video on that room you guys built upstairs.

[@gordowg1wg145]

Good to see you did it with the driver in place, as even a small chap like kyle can make a significant difference. FWIW, I've know some folks spending a lot of time working on the corner weights and part placement without the driver in it - and some of these were over 200lbs!

[@haugenscollectibles3553]

I like how wheelhouse put you guys on the last episode about the cheap turbos

[@MichelVermeulen2612]

Man you should put a nice blanket over that red mr2 to keep it nice and warm. Lot off work went in there,and it will look like it has gone thru a bad carwash if you just leave it there and dust it from time to time. Keep up the good work👍 Greetings from Amsterdam, The Netherlands.

[@aaronhuffman6922]

You should get welds wheels for it. And probably better brakes lol

[@dremoore9436]

It took me like 2 hours to put on my new coilovers, defiantly faster to just watch you do it. I’ll call you next time Kyle 🤣

[@My-NaMeS_jEfF]

Back seats lookin nice boiz!

[@makeitorleaveit1]

You got me on the 'ancient ruins of dust' 😅

[@anthonyguida4889]

Keep in mind.. setting ride height and adjusting the perches on the struts will shift a good amount of weight for your cross weights . I work in endurance racing and it's always such an important part of keeping the car stable and predictable.

[@10thgenad97]

Can’t wait until it’s actually ready for the track! Ganna be a beast! 🥵😏

[@thegenerousdegenerate9395]

Gonna be a beast... In the snow.❄ lol

[@richo2765]

Hahahahahahahahahaha! Can't wait until June 2020 at best!

[@Dj.maddox89]

We need a shirt with the Milwaukee impact gun, you use that thing on everything

[@samljones]

Get the MR2 some OZ Ultraleggera's, they'd look so sick!!

[@Atvsboy6]

Sam Jones yesssss!!!

[@CTemple82]

🤮🤮🤮🤮🤮

[@upnorthviking823]

Nahh.drag wheels is what it needs...

[@CTemple82]

untouchable, light after darkness. Most definitely.... Welds or BelaK’s would be awesome. But wouldn’t doubt that a set of JEGG Stars show up or whatever brand that was that he put on the Prelude.🤷‍♂️Either way, any decent drag wheels will look good. It’s hard to go wrong with proper set of bigs & littles.

[@upnorthviking823]

@@CTemple82 agreed!!🤘

[@joserotary9636]

Nice suspension, I might get those for my eg or the k tuned ones, will see.💯👍👍👍

[@johnwilliamson467]

To get the rears to plant together you may need the sway bar in the rear. if you are not turning corners then little need for the front sway bar.

[@tonycoffee7335]

Maaaan..... with all the weight on the back wheels and slicks that MR-2 might be your fastest car. Cant wait to see it hall ass!

[@cuhsp5336]

Rumor has it Kyle just ordered 3 Honda spoon engines, 3 t66 turbo, nos, and a motech exhaust system for sema

[@thegenerousdegenerate9395]

Honestly, I don't really care how long this thing takes as long as it keeps progressing forward. He should try and work out another deal of some sort with Trevor (motion auto) to get it painted once its all done. He can work on the red daily while ol'white lightening here is out for paint. He should also let Trevor go nuts painting realistic blue lightening bolts on a white basecoat. Or something else just as cool. It deserves an awesome livery after all this time/work/money thats been put into it.

[@kxlucifer]

Ikr trevors is good at body work,kyle is an skilled fabricator.so i dont see why not.plus we get to see the boostboiz/pfi fam collab with Motion auto again

[@uurkisme]

so stoked for you guys, this thing is coming along nicely and gonna be sick AF

[@AAATowDriver]

Everyone over there sporting the Hondaru merch, but I haven't seen Emilo even try working on it.

[@strickeN96]

I'm sure he'd be more than happy to start right away if your gonna pay for all the expensive parts. :)

[@ProTreeVideos]

Hey random person scrolling down the comments.. Have a wonderful day :)

[@applesyo]

Just finished watching Hayden’s video lol. Perfect timing

[@dougn420]

Fuck Hayden

[@seanhatch4425]

BC BRs on my Evo 9 and love em

[@SN0WMAN801]

Didn't someone give you wheels and tires already for the MR2? also to add what happened to that big ass holset turbo someone sent you?

[@tootoosick18]

Con grats om season 3 fastest car. Cant wait to see you guys.

[@MrKclo42112]

wow thats some awesome weights balance about as good as you can get for a drag car

[@canadainbagz149]

kyle gets in the car and only added 5 lbs extra 😂😂😂lmao🤘🤘🤘

[@frankraymer2276]

Take a few of your “magic noodles” and drop them in a glass of water and stir them to see what happens.

[@22rered29]

10:49 in your video your windshield is so clean its like its not even there

[@ImakeUgoLOLoriginal]

can't wait for this thing to be finished, with how much is left to do it's looking like it might not take long at all to get it on the dyno and then onto the track!

[@sheldontreadway3309]

Probably would drop 20lbs getting the dust off of it lol

[@hitechfreakz]

Man I can't wait to see the MR2 at the strip!!

[@timm5970]

You should have added weight for the windsheild. That thing is fucking heavy

[@pFbSpecV]

So much work still left to do on the mr2! Bc racing coilovers are the same ones I went with for my sentra.

[@bryduhbikeguy]

That's looking,and Sounding SICK !.If you haven't named it. Get down with 'The Sickness'!

[@rh2racing]

Hey Kyle, if you take off the front sway bar it will not only shed weight but also free up the front suspension to help transfer the load easier. It will be a bit floaty though.

[@josealicea6828]

Beautiful build the bro love and support you got in that garage is priceless can’t wait to see what you guys do next stay boosted boys 🗣let’s go🏁✌🏼🎥☝🏼

[@tonygriffiths2485]

Does sound nice, smooth with anger to go. Should be really something when its done. Enjoying this, thanks :)

[@highlytics]

Stop raggen on Kyle about the magic noodles haha still a lil funny tho :)

[@ajinkyakarande5048]

What I wanted on this channel a proper race car enough of drag cars. "u heard carbon in there somewhere" kylee atlast you are leveling upppp❤️❤️❤️ loving ittt. Just try carbon wheels and carbon aero kitt slow and steady but yessss please lets dooo thisss fammmm😭👍👍. Lightest and the fastest track mr2 in the world.

[@miguelgaona3235]

One 1000hp car was bought (prelude) and another was built (mr2) goes to show you can do your own thing by your self and better

[@stevebrumm5826]

When y’all gonna k swap that mustang cleetus has?!

[@mushlove6933]

pietkrijger leave then if ur gonna complain?

[@mushlove6933]

pietkrijger they are just being real, showing how much of a process this stuff takes. This channels purpose is to show you how to make these. Just wait till the mr2 is done, we’ll all have more content that’s not talk/showy as much

[@mushlove6933]

pietkrijger ok bud ur correct

[@Ewtlldo]

@pietkrijger Your comparing apples and oranges! Different budgets different platforms diffrent sponsors and not to mention cleetus pays james to work on his projects and cooper edits his videos. The vibe of the channel is totally diffrent aswell cleetus is a show man aiming for views whilst kyle is plugging away making informational content on each build with the whole intention to have fun not necessarily make a retirement fund pot! Gotta love them both for what they are you'll get your 'Boost' once the builds finished

[@ballgoodrape]

@@Ewtlldo actually garret edits his own videos and coop runs the merch biz like a boss!

[@deanishere7237]

Set em up right or ya doing wheelies HAHAHAHA !!!

[@Korbang..]

Boostedboiz, you got mentioned in donut media video, it was about eBay turbos and chinese parts. Thats cool asf

[@bryanteet7635]

Put the battery in the rear right of the car. Rear wheel drive means you want weight in the rear of the car. At least that's how I would do it

[@b-roll4881]

Do not forget there is hardly any weight up front. Kyle even said its going to want to lift the front end.

[@ciroricciardelli1448]

If you have more weight in the back you have more traction,but a 50/50 weight distribution is better for handling.

[@iR_STONA]

can you put a ladder bar suspension on the mr2? would that help to keep the nose down or can't you do that because the engine is in the rear of the car, it's going to act like bob riggles "hurst hemi under glass" drag car with the engine set in the rear. Going straight up to the sky

[@jasonyu93]

4:30 Chrisfix reference?

[@gemini3558]

Awesome Kyle nice BC shocks mate !!! Dam !!! Get a car cover for the red MR2 mate really !!! Toyota Oh what a feeling !!! 😜👍🇦🇺

[@renyn21]

I'd say remake that mr2 back plastic piece that surrounds the exhaust pipes in metal and get it coated in that exhaust ceramic stuff in black to not have it melt. It looks really good as it is now, can't wait to see it 2 stepping out the back.

[@johndoe-gw6tj]

Another intercooler video ; SWEET

[@jtaheri223]

Kyle, man hurry this build tf up!! Snow is coming soon! ❄️ ⛄️

[@user-zi5rs1by7b]

Come correct. You need some proper aero. At least a front splitter and flat bottom. Or send it as it is then add aero later to see the results.

[@earnestbunbury2103]

Jim Rome would be proud ...

[@zachaliles]

You guys knock out more builds in a week than Scotto over at hoonigan does in a month. #gettoworkscotto

[@rideordie3305]

Yeah I need to get back on my Integra build. Been sitting to long. 😫🚙💨🔧🐿

[@kxlucifer]

They have an integra thats sitting there behind the shop too lol..cant wait to see that thing going again

[@alextrvp5105]

So hype for this build

[@hanssgarage1886]

Great video again! 👌 That kind of scale would be perfect. Good thinking about the weight.👍

[@makeitorleaveit1]

With even bigger brakes up front should help with the weight placement

[@burritobowls]

what about if instead of weight plates install those undercar jack stands that use air and a tank in the front. Like they put on rally cars. Just a thought

[@seanhenderson9018]

The mr2 needs slicks and skinny’s ASAP.

[@IDLExHANDS]

Roman put on the coil overs. Better check the fluids! Oil Dry!

[@Bot_Brad]

Next Video: mr2 part 108. MR2 gets new valve caps.

[@natecoolins]

New steering wheel without airbag will shave a few pounds. Also when you get new wheels and tires you will have to weigh it again to get accurate numbers.

[@shanemonsees4798]

Need to put fans or a scoop for the inter cooler or you might as well take it off. Other option would be go to an ice box.

[@shaneblacklord3313]

Kyle, that thing is light, what a helmet and safety equipment? Carbon fiber trunk and engine cover would be cool. Wheels and tires are going to lighter? That thing is going to be sick.

[@kxlucifer]

I really want to see the mr2 have carbon fiber hood,trunk,wings and bumpers.itll take so much weight off.

[@Garage533Ohio]

I love watching your guys cars come along 👍can't wait to see this monster hit the dyno then the street💪💪

[@shawnmckee7111]

Cant wait to see this thing on the dyno!!

[@tyedull3480]

U should take the mr2 to Netflix fastest car and go against custom cars and 1 sports car

[@saltyfisherman603]

Wowwwww guys the GRINCH is hurt again !!!!!!!!

[@PistonAvatarGuy]

Get an EarthX battery, they're crazy expensive (~$800 for an ETX1200), but super light (7 lbs). Viking Aircraft Engines uses them to start their Honda engines, so it should work fine on this car.

[@jeffh6971]

Boosted Boiz magic noodles! Ill take a dozen! Haha

[@Laner84]

ooooo so close now dude !!! she gonna be ripping in no time !!

[@OKbigpop]

And yet again here we are kyle another video i have not missed

[@JustAwesome2020]

BC coil overs Awesome upgrade

[@corbinsligh1463]

When are you getting new wheels for that thang kyle

[@tedbear631]

11:35 sounds mean af already 👌

[@seahp17]

Can’t wait to see it ready

[@shotgun_chef3265]

When you reset the ride height the front rear weight bias will adjust. You shouldn't need a weight plate to prevent wheelies, just adjusting the ride height and shock settings should be enough. at most a set of limiter straps will keep the nose down.

[@snowysysadmin59]

4:18 dat outback doe honestly, kyle, do a subaru build besides the hondaru. like build an EJ (or an FA if youre feeling fancy) and see what you can make with it and then race hondaru

[@jacobboyle5420]

Can you show details wiring the car show us how you wire the vehicle. That would be so sick ...

[@munkysthrowpoop]

The old front had the sway bar endlink on it when you weighed it but the new one didnt