Twisted Hobbys/RC Factory - 45"Jabberwocky - Build & Maiden Flight

Build process for the Twisted Hobbys - 45"Jabberwocky A how to assembly with tips, tricks, and assembly of the Bush Gear!
Get your Jabberwocky, Power Combo and gear here! www.twistedhobbys.com
Binding and ESC Calibration Video • Receiver Binding and E...
Building Supplies and Materials Video • Tools and Building Mat...

[@toolbaggers]

I would love a Dr.1 in this style of build (full fuselage.)

[@TwistedHobbysIncChannel]

Have you seen the VA Models new Dr1 fokker. Its beyond this and more regarding similar build fuse type.

[@toolbaggers]

@@TwistedHobbysIncChannel Never seen that before. Thanks for letting me know!

[@chuckyounger1159]

Hey Jim! As always, very nice build and fly video. I just ordered the new Hacker Model’s 41” Madbull Max and was wondering if you are going to be doing a build video on that (Hacker Model’s 41” Madbull Max)?? Thanks in advance!! Cheers!!

[@zebzeb3219]

Nice build video. Two questions here : which CA glue brand are u using here, mine tends to whiten the foam and leaves ugly stains? And how do you compare this bird to the Turbo beaver? Cheers.

[@TwistedHobbysIncChannel]

CEC Corp/BSI/StarBond are some of our favorites. twistedhobbys.com/glue---adhesives/

[@zebzeb3219]

@@TwistedHobbysIncChannel thanks!

[@captnjim.]

In this video I used the CEC Corp Thin CA. To reduce whitening, setup a small fan, apply the thinnest coat possible, and don't use the kicker. If you have high humidity, it makes the problem worse. I love the Beaver! This beast is in an entirely different class. It's bigger, more power, has proper flaps, full floating elevator... the Beaver is smaller, lighter and flies more like a foamie.

[@zebzeb3219]

@@captnjim. thanks for the tips and the feedback 🤙🏼!

[@marshlogue23]

didnt show battery placement or cg ck

[@captnjim.]

I was working off an early manual that didn't have a recommended CG. There is a battery opening on the bottom of the plane at 17:06 you can see where I placed the velcro and that seemed to be the perfect spot with plenty of room to adjust CG fore/aft depending on your battery size. I use 3S 720mAh and 850mAh for 5-6 min flight time.

[@Axoy-2]

​@captnjim. How are you flying I get a 4 min flight on a 1300