Two IDIOTS build a YZ125 2 stroke... This is the worst dirt bike we've ever seen

[@KincadePavich]

Nice work fellas! Fork tubes turned out nice. Stoked to see this thing come together, looking good already!

[@ryanlloyd4395]

2 of the best in the business right here. Pure knowledge

[@mxrevival]

We’re grateful for you!

[@dustinh806]

Onium goggles… never heard of them until I watched your videos…. Just got 2 pairs in today and I love them! Best goggles I’ve ever owned!

[@mxrevival]

So rad! Really glad to hear that! Same here, love them. Loaded up on a ton of them. Even better you got the newest version of them with the thicker foam and revised nose pocket. 🙌😍

[@onium]

Thanks for the support Dustin! Stoked you're digging them 👊

[@onium]

@@mxrevival Charles knows!

[@dustinh806]

@@onium just ordered another pair and mirrored lense today. Love them!

[@onium]

@@dustinh806 So awesome thank you for the support!

[@motomatt6752]

As a lifelong blue crew guy that 125 is going to be so special. Great job with everything so far you guys do it right that’s for sure I really appreciate that. This bike would be amazing to own and would have a few blue bike friends in my garage

[@xzouix]

I dont like the headline. I've seen a bunch of your build videos over the last two years and you guys are not idiots, you know very well what you're doing.🤘🤘

[@mxrevival]

Thank you! We love building and filming for everyone. Truthfully, the title is practice for “catchy” & “clickable” - as we get better at that part of the game too… Thanks for watching!

[@xzouix]

@@mxrevival Haha, you geeks! Try "Two geeks build a YZ" :::-) LOL. Looking forward to watch the project bike come to life

[@EliteMotoFactory]

Appreciate the kindness. I was hoping for dumbasses but…

[@lampenracer]

You two are the duo I never knew I needed. 😅

[@mxrevival]

😂 glad to brighten your day! (We are realizing the same thing as our partnership blossoms)

[@mikehudg2209]

Very very cool 😎 125 pre-mix project 👌 I have an 88 cr125 honda that's been on my mind - Uncle Dave made Uncle Tony's day with a box of goodies that will detail the bike wonderfully- excellent work guys and attention to detail is second to none!!!

[@mxrevival]

Thanks Mikey! Takes a lot of rad dudes to put these together the right way. We’ve got “hella” Uncles 😂

[@DowneastTackle]

Charles Your passion and dedication to what you do are infectious. It’s clear that you love what you do, and that passion has inspired me to pursue my dreams without fear or hesitation. You’ve shown me the true power of passion and hard work. ............................Thank you Joshua from Canada

[@mxrevival]

Joshua, that may be the most kind and endearing message I’ve ever received on KZbin. Made me feel really good, so thank you. I am definitely sick in the head for these things! Glad to be able to share that with you. So is Tony! Keep up the good work, and never back down from anything 💪 you don’t need anyone’s permission to kick ass!

[@DowneastTackle]

Thank you so much for everything that you do, I know i am not the only one that you inspire. Keep being you. Subscriber for life @@mxrevival

[@DowneastTackle]

i would like to leave you with the quote from OG mandino, I will persist until I succeed. I was not delivered unto this world in defeat, nor does failure course in my veins. I am not a sheep waiting to be prodded by my shepherd. I am a lion and I refuse to talk, to walk, to sleep with the sheep. I will hear not those who weep and complain, for their disease is contagious. Let them join the sheep. The slaughterhouse of failure is not my destiny.@@mxrevival

[@smalltimer4370]

Great work - love this content style btw - a tag-team approach really helps to keep a momentum going throughout the video, especially when blended with humour - I really enjoyed i!

[@mxrevival]

Thanks Tim! Totally agree on the cadence of the videos with two people. It was / is always very hard to make sure things felt like they were removing doing it alone, making quick cuts to keep things from being boring. Fine line between that, and actually showing something of value. Two-man team definitely has a special vibe to it. Plus, it’s more fun for us in general. Easier to stay motivated, and the editing side of it is more enjoyable, too, because you’re sifting through all of the funny stuff, including the things that we can’t actually say on KZbin in public 😅

[@rickybobby8417]

You guy's teaming up was inevitable and is pure gold

[@bobbyblenio4571]

Totally 🤘⚡️

[@mikebrown41182]

Haha Tony taking a number 2 on the poor left case! Two things, we learned today that there is two uncle’s around, but let us all remember: There is only one (Dirty). Second: I have to raise concern, i dont see Larry anywhere? Did Tony not feed him properly? Did i just see a stinger og 96, jees chuck and dirty, you find them jewels. Keep it coming bois, the white theme is going to be so rad! Buttheads 😎🐘

[@mxrevival]

Hahaha thanks Mike! Yes, there is only one dirty! We’ve all heard of ODB, this is OGD! Yes, unfortunately now that Larry has been removed from his nutrient source (rotting bike seat foam outside in the sun and rain) he has withered and perished. But we’ve kept the body preserved in a plastic baggie, because the new owner of this bike will also win Larry’s remnants when we give it away 😂 thank you for your concern and condolences haha. Stinger… all day! Boioioiioiiiiiooooiiiiooonnnnggg

[@michaelpresey2273]

Where'd ya guys go? Waiting for next video haha

[@Jonathon-r4j]

Can't wait for the next update loving the build great work

[@HooligansMx]

Definitely love you guys working together pure educational entertainment 😂 😂. I personally stopped running black rads I tested the theory and they run WAY hotter than bare metal or a light color

[@mxrevival]

Hahaha! We’re soked to hear it. Sometimes we may all be getting a little dumber as well… all in fun! Always wondered if that’s why they stopped painting them black from the factory back in the day. Ours were so thrashed, more of a cleanup technique to match the factory color. Dean at FBC even has a heat dissipating coating for these and exhaust systems. Trick stuff with the best of both worlds 🙌 Thanks for watching!

[@EliteMotoFactory]

Thanks dude! It’s certainly an aquired taste. We can be serious too, sort of. The bikes we build are where that goes down. Interesting feedback. I tested that myself as well years ago two and four stroke and found no great impact on the black (anodized) radiators for higher running temps. What surface treatment were you using?

[@Dirt_Bike_Dave]

Hello Boys 👋👋 been wondering what you've been up to...nice to see the same old shenanigans...you guys crack me up and it's a good way to start my Saturday..keep it up.😁👍

[@colinantonsen6613]

Great job guys, greetings from Sweden

[@someoneyouknow96]

Dude! I was just commenting to Hitchko last week that I wish the PC stuff still came with the stinger. He just put one on his KX250 build, I have a 304 showing up today………but no stinger 😢 Edit: nevermind, my other order is showing up today. PC muffler is coming next Thursday or so.

[@mxrevival]

Congrats dude! You should email sometime when you need PC. Happy to help with it.

[@someoneyouknow96]

@@mxrevival I got it through motosport.

[@someoneyouknow96]

Silencer will be here today and I found a new PC silencer with a stinger so I ordered that this morning. So ill have 3 exhausts for my POS!

[@tylerjamesgillismusic4782]

Hahahah ok shitting on the case was priceless. Chuck you guys are bomb making this bike come to life haha glad to see the work coming along great!!!ive been busy myself , also it’s been a crazy winter so far for us . And Tony… Sounds like chewbacca taking a shit!!!! Lol

[@EliteMotoFactory]

“You’re grounded! For what?! Not thinking the garbage disposal sounding like Chewbacca taking a shit!” 😂😂. The cases deserved it

[@MG-up5mh]

Thanks for the video gents, had the same problem removing the jug studs, took me days of heating gently and using candle wax small tapping on top, I had also buggered the threads and welded larger nut closer to base of cases so stud wouldn’t bent/snap.

[@mxrevival]

Those sure are all the tricks to get it done! Sounds like you pulled it off too. Heck yes.🙌 I’ve seen as bad as snapped off flush with the cases. Machine shop will weld a washer to the stud, through the washer hole- then weld a nut to the washer. Usually the heat from the welder is more than enough to extract the stud too. We couldn’t believe where we ended up with these in the end. Almost felt embarrassing. But made for good content on the website. “What to do when” as we’re all human. Thanks for watching today’s drop! -Charles

[@Sweendawg32]

Hey guys welcome back to mxss! Today we are gonna show you , how to cut a hole in your box. Step one - cut a hole in your box Step two- put your junk in that box Step three- make her open the box. And that’s the way you do it.

[@EliteMotoFactory]

😂😂😂 and “you got a hole in your airbox” - my best Timberlake voice. Wicked funny MIKEY

[@mxrevival]

Kindred spirits….

[@moto201]

Looking good boys! The 1-2-5 is starting to look good too! 🤩

[@mxrevival]

Thank you Bobby B!

[@paulbudford]

Pro circuit stinger, and white air box. 👌 This thing is going to be so cool. 👍

[@mxrevival]

Thanks for sharing the vision with us!

[@TommyToboggan611]

The 6 speeds from the older bikes swap in the 5 speed bikes. Did it on my 02 just this winter !

[@mxrevival]

No way! So there’s clearance for the six speed transmission inside the five speed cases? Or you dropped a five speed into a six speed case? (pretty sure you meant exactly what you said about the six inside the five case… but it would be good to know)

[@colbymc.2264]

I love your channel man, I love how you explain everything really clearly and I love your setup, I live in nampa Idaho it would be a blessing to have a tour of ur shop in Boise🙏🏼🙏🏼🙏🏼❤️ I’m trying to get money to fix my Suzuki but I broke my ankle riding my other dirtbikes and I can’t work or ride for 10 weeks atleast.

[@baldurivar]

What white paint/color did you guy’s go with? I’m looking for the correct “White” color for my 2018 TE300i frame. Not sure which is the closest one Ral 9003 or 9016..

[@mileshoddinott8039]

Hey Charles with coating radiators does it have any effect on cooling or profomence?

[@mxrevival]

Have never hit them with at temp gun personally, but word on the street is that coatings can make them run hotter. It may be why factories stopped painting them from the factory back in the 90s. We’re sure that would also save them some money. But as you’ve noticed, everything nowadays is bare aluminum. We would imagine there are some performance benefits as well, in terms of lower temperatures. In our case, being that these were black when they were new, we are trying to keep an OEM vibe and of course, keep them looking a bit nicer. Dean at FBC even has a heat dissipating coating that is black. So it has some performance and good looks!

[@brettlaage9687]

This bike is going to be so badass!

[@mxrevival]

We are stoked, my man!

[@srkafi_]

love rebuild thing❤❤

[@snipetime21]

My 97 is almost done. Just wondering how the throttle cable is ran. My seems short but my dealer says it's right

[@mxrevival]

It would be strange if it was short, but you could definitely try running it down the opposite side of your frame if it afford you any extra slack. If that doesn’t work, I would order a new cable. Routing should be from the throttle housing above, back behind the front number plate, and down the side of the frame rail. Some bikes, have the cable routed on the left of the frame rail, some routed on the right. It really doesn’t matter. Inversely a cable that is too long on one side of the frame can be routed on the other side to remove slack. I hope that helps

[@Sweendawg32]

First one ! Let’s go !!

[@mxrevival]

Ohhhh Sween-Dogg with the fastest qualifying lap! P1! Enjoy Supercross today, my dude.

[@bobbyblenio4571]

2 idiots build a 2 stroke🤣🤣🤣🤣🤣Fkn Hilarious 🤘💥💥🔥

[@mxrevival]

🤣

[@mixtips637]

Black n White

[@mxrevival]

Close!!! We’ve got a twist…

[@yamahaxs6501]

I'm in to win! I need a 125 in the stable.

[@mxrevival]

Ohhh boy! Welcome aboard!

[@e954rr2]

You didn’t build anything you just assembled parts that someone else built

[@mxrevival]

Technically, we didn’t even do that! Try not to sit on your nuts next time you watch one of our videos. It makes you abrasive. 😂 Thanks for watching!

[@e954rr2]

@@mxrevival I won’t ass hat

[@EliteMotoFactory]

Well I did almost build a turd on an engine case. Does that count and building something? Dork. At least you watched, thanks for that…

[@brandonpanozzo86]

Lets goooo

[@mxrevival]

📈📈🤌🤌🤌🤌

[@rezkidgamingyt4725]

Lmfao Awsome

[@andrewspence7635]

Good luck masking a ktm or husky vin , piss poor job in stamping them ,

[@mxrevival]

Dude, you are not kidding! Those things are so stinking thin! We think they punch the frames through the sticker. We usually hang onto the stickers just in case what’s left of the Vin number on the frame disappears after a coat.

[@ahole5407]

These guys are doing some shady business practices. Sounds like they either got sued, evaded taxs, or were screwing people over and filed bankruptcy. Started a new company with Bank backing from the other guys' shop. Idiot KZbin scammers. People who think that all these "giveaways" are real and not fake are fools

[@ahole5407]

Couple yuppies from commiefornia that don't know what a two stroke stinger actually is 😂

[@EliteMotoFactory]

Incorrect. I’m a Puerto Rican from Minnesota…. Weird combo I know so suck it. Also if you reference the exhaust companies they tend to refer to the end cap as euro style or stinger. Put that in your expansion chamber and smoke it, dweeb.