How to tell me you abuse and neglect your bike without saying you abuse and neglect your bike.
@HighlandRider8 ай бұрын
well you are a bundle of joy
@stubrown69038 ай бұрын
No motorcycle company will cover rust and corrosion damage from riding in salty weather, be it salt dust on the road or salt air from living near the coast in marine salt air. You have to keep them clean and waxed properly to protect them. I don't think all the facts were given in this video. He said he is in Scotland but didn't say a location. The salt air in maritime locations do lots of damage which is present on this bike....😢 I don't work for any company but have been riding since the early 1970s in many coastal locations and know the damage salt on roads and salt air that happens.
@HighlandRider8 ай бұрын
Interesting Stu. Firstly, not sure why it matters but I bow to your knowledge of salt, I live in Inverness, about 0.9 miles from the twon centre. I ride in The Highlands, and sometimes that takes me on coastal roads. Motorcycle companies do deal with warranty claims due to rust and corrosion, specifically Harley Davidson changed the fron forks on my Low Rider due to pitting and BMW changed the engine on my GS due to corrosion on the head cases, and the brake calipers on my RT, which seized due to corrosion. Not sure what other facts you want.
@theonlyredspecial6 ай бұрын
Acf50 is a preventative cure for this. I know from experience.
@chrisholman648 ай бұрын
Concerned by this because I've bought a '22 identical to yours, picking it up this weekend. The previous gen 1800s were notorious for wheel corrosion because they were unlacquered alloy; my current bike's wheels were powder-coated black at some point in the past. I thought the new Goldwings with painted black wheels would avoid this issue. The exhaust covers remind me of the CB1100 I had for a while; chromed steel mudguards which had absolutely no protective coating on the underside. Of course they look great until the rust breaks through from beneath, by which time they're beyond repair. One other comment though; you say the bike doesn't get ridden in winter, yet you've got a video on your channel talking about what a great winter bike it is, and showing it just after a ride which you went on following a period of snow. No doubt you took great care to clean it but it's not going to help with any warranty argument (and it's impossible to clean behind that exhaust cover anyway). I really appreciate you sharing this, and the first thing I'll do when I get my bike home is take off the exhaust covers, clean them up and put a protection on them (Dinitrol / Waxoyl or maybe a tough paint) I live in Blackpool by the way (I think your bike came from the same dealer group as Blackpool Honda) so my nemesis is sea spray, thankfully the roads don't get salted much in winter!
@HighlandRider8 ай бұрын
Hello Chris, you are right on two counts. One I got the bike from Northwest Honda and I will be calling them tomorrow. Second, yes I did ride it in winter, one ride whenever that video was taken, I think around Christmas 2022. I did clean it afterwards, just not well enough. For the purposes of warranty claim, I have never been told by Honda, nor is it the manual that I can find, not to ride in winter. I expect bikes to suffer in winter, it is the nature of them.
@TheTrinityguy8 ай бұрын
The clearcoat anodizing on normal wheels is way more robust to corrosion as well as the chrome finish on exhaust covers. The blacked-out version is just flat black paint and in your corrosive salt environment would require you to wash and dry the bike getting it perfectly clean after every ride, The best choice would be to break down the wheel and tire and have your wheel and other parts carefully cleaned and powder coated black to seal it from the harsh elements. I could understand how the manufacturer or dealerships would not want to address this as millions of these bikes are sold and ridden worldwide without these results occurring. I have experienced this aluminum corrosion issue myself recently. I had placed three of my expensive paint guns inside a rubbermaid storage container and placed in my attic here in Tampa, Florida I brought the tote down and looked inside and all three spray guns had rotted away. I was amazed. One was anodized red but still corroded to dust! $1500 gone in only two years inside a dry attic the humidity and heat alone did it. I am originally from Seattle, WA where this would never happen in a lifetime. Different weather and conditions change everything. Good luck, it's a great bike and that damage is cosmetics only that you can correct. Thanks for sharing.
@HighlandRider8 ай бұрын
Thank you for your comments and information. The bike is great and when I ride it I love it, just want to ride it more.
@245241285 ай бұрын
Part of keeping a bike is the ritual of cleaning! Quite theraputic ! Have a Goldwing myself ! Never seen a problem but one golden rule is do not use a high presure jet washer with foaming agent. Few years ago had a GS with gold wheels
@HighlandRider5 ай бұрын
How detailed is ritual cleaning? Do you get on your back and right underneath, thoroughly clean the wheels?
@245241285 ай бұрын
@@HighlandRider A no to lie on your back! My GS had a problem with wheel paint peeling! Also had a Ducati where paint bubbled! So stopped using car wash type cleaning agents. Started using a bucket and sponge! Several products for wheels. One I would recommend is XCP rust blocker! I use it on the parts u cannot see underneath and wheels. A low mechanics trolly stool saves the knees! Good luck with new GS
@Big-Si22538 ай бұрын
I have a 2020 DCT non tour (the black really fast one! 🙂) Mine also lives in the garage, but has been out in the winter on occasion. I have zero corrosion problems so I find what has happened to yours very strange.
@HighlandRider8 ай бұрын
Where do you live Simon? Happy for you and assuming you have looked behind all the panels?
@Big-Si22538 ай бұрын
@@HighlandRider I live in Worcestershire, and I had the panels off to change the exhaust about a year ago, perhaps a little more and they were fine.
@HighlandRider8 ай бұрын
@@Big-Si2253 Good to know, and it is obviously worth checking, something I didn't do.
@Big-Si22538 ай бұрын
@@HighlandRider I hope your dealer/Honda get you sorted out.👍
@throttle_up8 ай бұрын
That is genuinely shocking. And the lack of concern from the dealership is equally so.
@HighlandRider8 ай бұрын
It is, bikes rust, it is part of ownership but this to me is a step too far
@jgoogleheim88808 ай бұрын
It is possible that your concrete floor in the garage is causing galvanic corrosion when you park your bike on it using the centerstand (or sidestand). The telltale sign is that the bottom of the stand turns white with corrosion. I had an Indian chrome sidestand completely peel its chrome off on my concrete floor so I replaced it and parked on a plastic sheet. Problem solved. My KTM centerstand showed the same corrosion until separating it from the concrete. In cold climates, like mine, some contractors request Calcium Chloride be added to concrete to make it cure faster and not freeze.
@HighlandRider8 ай бұрын
That is very interesting and could be possible. I will look into that some more, but question, if that is the case, would garage mats help? So putting a barrier between the bike and the concrete floor?
@jgoogleheim88808 ай бұрын
@@HighlandRider Rubber mats would work. anything noncondutive will work. I have used 1/4" plywood and plastic signs. Cardboard doesn't work because it holds moisture and that makes a good conductor. Sorry you had to go through this. I actually blamed Indian for my corroded sidestand but the problem was my concrete floor. I put bits of steel on the floor as a test and they turned white and corroded very quickly. I thought this was a winter New England problem for pouring concrete floors. While it is possible your bike was made using defective materials it seems something is corroding it. Another possibility would be if roads in your area are treated with chemicals. I have to wait until several rains wash away the salt etc. after winter snow and ice melts.
@HighlandRider8 ай бұрын
@@jgoogleheim8880 Thank you, very interesting and gives me something to look at
@jgoogleheim88808 ай бұрын
@@HighlandRider The only other thing I can think of is that you ride on roads where the ocean spray gets on the road. The corrosion you show on the inside muffler covers is the worst I have ever seen. I'll need to check mine. Keep on riding!
@HighlandRider8 ай бұрын
@@jgoogleheim8880 No realy, I do ride close to the sea at times, but not in a sustained way
@Moto_APT8 ай бұрын
I have had two ST1100's both ridden in the winter and no corrosion after 70k, not even the famed collector box. Thanks to Waxoyl. But this on a new bike! It shows how the Honda qualty is really dropping, including their aftersales service. I was thinking of trading both my GS and RT in for a wing, but not after watching this. Sounds also like the dealer expected the corrosion??
@HighlandRider8 ай бұрын
Bikes rust, it is an occupational hazard, and as such we have to take measures especially if lots of winter riding is to be done. Personally, riding in the cold and ice is no longer what I want to do on a regular basis, but when you get that odd sunny winters day, then I like the odd ride for an hour or two. Not on this bike though, I have learned my lesson. Have just purchased Lanoguard for further protection, as need more than ACF 50 can deliver.
@stubrown69038 ай бұрын
Salt dust does as much corrosion damage, the silent killer, as does riding in the wet snow. I don't ride in the winter unless there gas been a good rain to wash the salt away off the roads no matter how nice it is out. It's not Honda's fault.
@robertmercer91178 ай бұрын
At some point, that Goldwing was submerged in salt water. Why is the wheel corrosion limited to just a portion of the wheel? Does not add up.
@HighlandRider8 ай бұрын
Well, when you worked out when that happened let me know don’t doesn’t happen again
@ientwistle18 ай бұрын
How many miles has the bike done? I have a 2019 , 20000 miles on it with all the black trim and it's nothing like yours
@HighlandRider8 ай бұрын
Just passed 7k miles
@ientwistle18 ай бұрын
@@HighlandRider that's terrible 😞
@edtxw016 ай бұрын
Just thinking of buying the exact same bike, 22 plate in blue. I can't believe the corrosion on your bike. Its really made me reconsider buying one. I've had several Hondas in the past and they have been faultless. How common is this corrosion problem on the newer Goldwing models?
@HighlandRider6 ай бұрын
That is hard to say. The paint on these newer bikes is very thin, that is an accepted fact. So it depends how you look after it. The 'good' owners who seem to suffer no corrosion are obsessive cleaners, especially the back wheel. You either need to get the bike off the ground and clean the back wheel and wheel caliper fully, or get it ceramic coated, although that will not protect the calliper. If you look at the responses on the rest of my videos on this you will see I wasn't alone, and these bikes do need a lot of care. Note, although it is not in any of my videos, I had started to get a problem with my DCT not disengaging at junctions and I was having to hold it on the brake.
@edtxw016 ай бұрын
I'm going to look at one tomorrow; if I buy it I'll have to be more careful with the cleaning than I am with my BMW GS. Thanks for sharing your issues. It helps the rest of us.
@stevetee41458 ай бұрын
It’s not just a Honda Goldwing problem. I think it’s an industry wide problem. Motorcycle manufacturers are cutting corners and some components are just not painted correctly. I have a 2022 Hayabusa. I am a fair weather rider. I’ve had to re spray the back wheel. The paint on the swinging arm is peeling off. Other components have needed to be re painted. I don’t think it matters which make of motorcycle you buy these days. They all have let standards fall.
@HighlandRider8 ай бұрын
I agree Steve, quality has been dropping for a few years now.
@MarkKarl-lj4nn8 ай бұрын
My September 23 DCT tour rear wheel was corroded at 900 miles. Honda would not change it under warranty due to “external forces causing corrosion” £32500 flagship bike! Luckily my dealer fitted a new wheel and tyre from a new bike they had in stock and they bore the cost!!! I also have a 2019 GSA and a 2021 RT both with more miles and ridden in winter with no corrosion on the wheels. The Goldwing will be traded for a new 1600GTL😎
@HighlandRider8 ай бұрын
Just had an email from Honda saying they will change the heat guards but not the wheels, as wheels are not covered under warranty. Just bought a 2020 GSA to ride while I sort this out, and now I can take my time. Warranty booklet doesn't mention wheels as an exemption so will see how they respond to that. In the meantime, I will keep the negative videos coming.
@carlton6838 ай бұрын
Hi there what about the warranty claim I’d be straight back to them 👎 I stick to my triumph tiger thanks for the heads
@HighlandRider8 ай бұрын
Not interested, goes as wear and tear but still fighting and will send them the video
@hondaboy13008 ай бұрын
Dreadful quality on what is, as you say, a very expensive bike. As you know I have ridden a 2007 Honda CB1300 for 17 years, from new, I have literally hardly any corrosion on mine.
@SBKPete8 ай бұрын
Wow, I was so close to purchasing one from Dobles. So glad I didn’t 🙏🏻 That’s shocking build quality 😬
@HighlandRider8 ай бұрын
Sad that because they are great bikes but the build quality is so poor they are a two season bike.
@clay18837 ай бұрын
"Not To But a Goildwing". Should "But" have two t's?
@HighlandRider7 ай бұрын
Ha ha, totally missed that.
@kevingallen16788 ай бұрын
Appalling ! Changed my view of Honda and I’ve got one. This is unacceptable on any bike these days but on a bike costing so much it’s unforgivable! It’s like gong back to the days of rusting Ford Anglias.
@HighlandRider8 ай бұрын
Not why I bought a Honda
@LeytonC8 ай бұрын
WTF? That is never right, that has to be a warranty claim - my Bandit that i paid £600 for has far less corrosion, I ride in the winter and wash it once a year whether it needs or not. The eye-watering price of that bike should mean instant replacement. That is fcuking shocking.
@HighlandRider8 ай бұрын
Will be trying again now I have the videos, but I have little hope or expectation
@SOLOMOTOUK8 ай бұрын
That’s absolutely terrible for Honda I’ve got 35 year old Kawasaki gpz in 100% better condition and they won’t take it in has trade that’s bad you do what your going to do and get the most out of it 👍
@89gaz894 ай бұрын
just get it all powder coated.. they will take it then
@garyedwards81426 ай бұрын
So many of these new shape wings for sale, poor show by Honda skimping on quality….I’ll stick with my 2002 wing….👍
@HighlandRider6 ай бұрын
Good plan
@robertmercer91178 ай бұрын
If you are using WD-40 to protect your Goldwing from corrosion you are wasting your time and money. You had to have driven your Goldwing in salt water and not rinsed it off. You are blaming Honda for your neglect. Considering how bad it is, not surprising that dealer doesn't want it.
@HighlandRider8 ай бұрын
Who in their right mind would use WD40 as a corrosion protector? Are you nuts? Here was me thinking ACF 50 liberally applied would work, but obviously doing that and not riding in winter is total neglect.
@rmgslc8 ай бұрын
Hondas are real poor quality
@HighlandRider8 ай бұрын
Belies their reputation, living on the past
@bluebigball18 ай бұрын
Disappointing to see this. I have same bike, colour, year and similar miles. Can't see any rust on mine anywhere, but will take a closer look now I have seen yours. How easy is that exhaust cover to get off?
@HighlandRider8 ай бұрын
Pretty easy. You have those small rear footpegs that stick out, so pull them out to reveal two star bolts. Undo them, then give the unit a light tap with a hammer and then ease it off. Hopefully as easy to put back on.