Two storey reinforced concrete design per NSCP 2015 Part 7 of 8

[@kokushi333]

Boss dito sa 2:45 sana pinindot mo nalang din po yung ACI-318 at ACI-Footing para ma-type narin namin pag gagawa kami, gaya ng ganyan sa ginawa nyo sa Concrete na naka-display yung details 😅

[@rizaloudimplewabe4855]

May update naba nito? May list po kayo?

[@reynaldbonbilgera8219]

meron kana po? baka pwede pahinge

[@jpdelarosa]

You may order my STAAD.Pro and STAAD Foundation books on this link, From Lazada, www.lazada.com.ph/shop/xstructuresph From Shopee shopee.ph/xstructuresph

[@AEDOENGINEERING]

Sir good day. Just to inquire how can i avail Advance RCDC? Thanks

[@jan-michaelvincent4166]

Sir pwede pahingi po ng screenshot load combo ng ACI 318 at ACI Footing .. maraming salamat po..

[@jerrymartejr]

makikita naman sa video

[@kokushi333]

@@jerrymartejr hindi po makita, dinaanan lang. 2:45

[@ryanjaymistula9503]

Hi Sir, Thank you po for sharing this very informative concrete design. Question ko nga lang po din is why po hindi nakasama yung wind load? Thank you very much and regards

[@rosebondaasin8414]

Sir.. Malaking guide to samin na gustong matuto. Pero d na po ma view ang 1,2 and 6.. Hehe.. Pa update naman po.

[@shielabustamante6788]

Sir unable to read analysis data po lumalabas pag nag import from STAAD pro to RCDC.

[@jpdelarosa]

You may order my STAAD.Pro and STAAD Foundation books on this link, bit.ly/3QkuBqp bit.ly/3QkuBqp bit.ly/3QkuBqp

[@atifiqbal8281]

Sir! You can tell me . You use in NSCP 2015 in code ACI-FOOTING what you make digit Graph

[@johnkeanumedes8142]

Hi sir pwede po makahingi ng copy ng autoload combo ng ACI 318 and ACI foundation? Salamat po

[@mitchmartinito]

Hi po. May load combination na po kau ng ACI 318 at ACI foundation po?

[@Eeejuan]

Hi Sir JP, I created a concrete structure using STAAD.PRO CONNECT EDITIONs PHYSICAL MODELLER Workflow. Then after that I also analyse it using the same software. Save and close the file. To finish my design, I opened it in SACD-RCDC but to my disappointment SACD was telling me that column is missing. But if i tried to open it in v8i and remove all physical member properties, SACD works. My question, IS IT NOT ALLOWED TO DESIGN A FILE WITH PHYSICAL MEMBER? OR THERE IS REMEDY FOR THIS ONE?

[@darylbaldeo6131]

hi sir, tanung kolang po kung san nakakakuha ng Staad RCDC? maraming salamat po sa tutorial as in sobrang educative po sya.

[@rolandolor745]

Hello po sir. Ano pong gagawin pag nag-"Unable to read data analysis."??

[@tongpi9305]

mga lods pwede patingin ung ACI - Footing nyo ung iyi input palang sa load combination. hindi ko po kasi makuha eh. TIA 😊

[@rotcivmarninosantillan1493]

Good Morning sir, May question po ako. Bakit hindi sinali ang wind load sa analysis sa concrete frame? Thank you po sir.

[@petersmith5883]

Usually po dapat compute nyo then compare sa earthquake base shear. Since napakalit ng chance magsabay ang windload at earthquake load. Kung parehas nyo pong icoconsider magiging mahal ung structure.

[@vonmeneses5242]

clinick nlang sana yung autoload combinations sa AISC 318 at Footing po

[@tristanjoseph_tv4574]

sir ask ko lng po ung sa design calculation ni RCDC, ung “Ast(flex)” po kasi nasolve ko sya manually as singly reinforced, pero ung nirerequire ni RCDC para makuha ung no. of bars ay ung “Ast” which is masmalaki ng 30% to be exact sa “Ast(flex)”. ex . ung “ast(flex) =499mm2 but “ast”=648.7mm2. , may provision po bang ganya sa ACI ...thanks po

[@tristanvargas6825]

hello sir, gamit ko po kasi yung bagong version ng rcdc. Tanong ko lang po kung ano dapat gamitin sa Ductile Design, Special or Intermediate?

[@y49543]

Sir JP please share the video of Two storey reinforced concrete design per NSCP 2015 Part 6 of 8. nabura ata dto sir. thanks you.

[@vonmeneses5242]

Hi Sir Pwede po sana pa tingin ng table for AISC-318 and Footing Tables. Na view ko din po yung footing design view niyo po na referencing this video pero wala po naka click yung autoload combinations for 2 tables

[@EngrJosh-mw9mf]

Hello po sir how to put the 12mm Rebar size or another size of rebar, kasi wala po kasi yung choices yung 12mm and 20mm and etc.

[@joelcalimpong5670]

Sir Salamat sa video po. pwedi rin po ba kayo gumawa video nito na gamit si STAAD lang, para sa mga walang Advanced Concrete RCDC software? Salamat Sir.

[@josepepeclimaco1552]

I LIKE THIS TUTORIAL..CTTO

[@rebieinfante6859]

Sir JP please share the video of Two storey reinforced concrete design per NSCP 2015 Part 6 of 8 diko kasi mahanap. thanks

[@engrchk]

Ang computation po ba sa rcdc ay pwede po iprint for building permit?

[@justarandomstranger279]

Sir ask ko lang po kung yung design calculation po ba ng rcdc ay enough na para ipass as structural analysis pag kukuha ng building permit?salamat po.first time ko lang po kasi eh :)

[@jerrymartejr]

Opo. Just make sure licensed yung staad mo

[@ganfamily1660]

sir, salamat po talaga

[@jpdelarosa]

you're welcome po

[@jr-vb3zo]

Sir JP, pwede po maupload ung parts 1,2 and 6? Thank you po

[@DarenModesto]

Good Day po sir. Thank you very much for sharing di ko na kailangan magbayad for training ng STAAD. Tanong lang po sir pano po maactivate yung License for Design Code? "License for the Design Code is not found." yan po kasi yung lumalabas kapag nag oopen na ako ng RCDC. Thank you so much po.

[@cheatsmygame]

hi po may problem ka pa until now sa license code design not found sa rcdc?

[@itachi0000]

Sir how can we design doubly reinforced beam in rcdc??

[@jujujiji8634]

hi sir, the bottom of column, is it from the top of footing or bottom? do i need to offset down all beam including ground beam?

[@jpdelarosa]

1) top of footing 2) yes you may

[@vonmeneses5242]

@@jpdelarosa Sir JP pwede po pa tingin ng AISC 318 and Footing autoload combi tables please

[@basner5679]

Hi sir pag click ko po sa basic load cases meron po akong option na category of lateral loads either "factored" or "unfactored" ano po dapat ang piliin ko? thanks in advance (RCDC Connect Edition gamit ko po)

[@rainsound5161]

sir pansin ko lang, bakit yung bottom bars sa beam ay 2 pcs RS, tapos yung top bars ay 3 pcs RS, dba baliktad?

[@jovinyllojares7540]

Sir bakit po walang wind load sa rc design?

[@yanyansmusician1180]

I think kahit kasi iadd sya super liit lang ng value

[@raymundeugenio1897]

Sir kaya ba ng staad pro na magdesign ng raker beam or yong nakaslant na beam? After run analysis kasi meron akong error na not all joints lie at the same floor level.

[@markallantayo1200]

ANU PO KAYA IBIG SABIHIN NG FAILED DUE TO BM-DETAILING IN RCDC

[@jujujiji8634]

sir, napansin ko po pag marami fail sa beam ay adjust ako ng marami sa staad pro, tapos test ko ulit sa rcdc, meron po kau tutorial para sa staad pro muna e test ang failure bago mag rcdc?

[@kentpatrickpinat7795]

how to fixed BM-Detailing failure diagnostics in Staad RCDC?

[@jerrymartejr]

right click>design

[@nikkanvilla4615]

sir bakit po di ko mabago "Design Code" naka gray siya. Staad RCDC v4.2.1.3 po gamit ko

[@vonnandreuconstruction9862]

Hello. Part 7 of 8 po ito. Pero hindi ko po mahanap yung part 6 of 8.

[@maverick.eugenio]

Need ko po sana ng values ng table ng ACI-318 under NSCP 2015 na pang generate ng loads, tapos yung ACI Footing narin po. Need ko lang po, pwede po bang sa email. :) P.s. Student po ako and ginawa ko or sinundan ko po kasi lahat ng steps na ginawa niyp po.

[@louieagoilo7096]

sir pag nag fail po ba sa rcdc ibig sabihin ng fail din yung analysis sa staad pro? Thank you po sa video. very educational. helped me a lot.

[@jerrymartejr]

pag fail po, meaning hindi pe enough and section. Yung ginagawa lang ng staad is solve for stresses and reactions

[@marckevin5408]

SIR PAANO PO LICENSE NG STAAD PRO RCDC? KASAMA NA BA ANG RCDC KAPAG BIBILI NG STAAD PRO.?

[@Ginhinyero]

Hi sir, Pa reupload naman po ng autoloadings. Salamat.

[@markcanicula]

Sir tanong ko lang po ung sa load combination sa seismic.. nd ko po nkuha ung 14 load combinations, ginamit nio po ung section 203.3.1 ng NSCP ska po dinagdag nio ung 203.5 pero po ung nglagay po kayo ng negative sign sa formula ng 203-19 nalito lng po ako..phelp nmn po..salamat

[@markcanicula]

tama po ba sir na ung ginamit nio lang na combintaion load ay ung 203-1,2,19&20? kasi po ung iba reduntant na..tpos po my ginamit po kaung E1 ska E2 na same ung value pero ung sign mgkaiba..same po un na horizontal base shear na opposite direction lang po ba? thank you po

[@vanforrentinbicol2244]

HELLO sir yong Two storey reinforced concrete design per NSCP 2015 Part 6 of 8, di ko mahanap dito nabura po cguro ...

[@SolarBoys-oz9ze]

bakit po . mas madaming bakal sa top kesa sa bottom sa midspan po

[@pamela3005]

may nakuha na po ba kayong info tungkl nito sir?

[@bnchromlech720]

Nag fail saken ung G2 and G7.. baket kaya? tapos pero same model lang gamit ko 6.1 rcdc

[@janelrryramirez9113]

akin din nag fail. same model lang gamit ko. na solve muna tol ?

[@jonercenido2376]

Sir anong kaibahan ng load combinations na ginamit mo sa load combinations na nasa Table 405.3.1 ng NSCP 2015?

[@kimcor]

hi sir. tanong ko din to ngayon. may sagot na po ba to? hehe

[@tristanjoseph_tv4574]

Nag eeror po ung beams sa G2,G6,G7, and G8 po,, RCDC 6.1 po gmit ko. Same lng nmn po ng model sir,,, thanks in advance po

[@bnchromlech720]

SAME TAU NG NAG ERROR AHAA

[@bnchromlech720]

WALA DING BAKAL NA 12MM sau?

[@tristanjoseph_tv4574]

wala nga 12mm eh,, baga may bug un software.. ok nmn kasi kay sir

[@bnchromlech720]

ewan nga eh. parang wala tuloy ako tiwala sa program kasi same model tapos iba ng design output.

[@tristanjoseph_tv4574]

BN Cromlech mas same siguro kung irun mismo sa Staad

[@jandavetampipi9430]

ser pwede naba di kasali ang stair?

[@nonoybelga8753]

Good Evening Sir. Ask ko lang saan pwede makakuha ng STAAD RCDC. Thank you, kasi malaking tulong ito sa mga projects namin sa LGU

[@tetong123]

Sir ask ko lang po kung pwdeng mag add ng steel grade? Grade 33 at 40? thanks po

[@jpdelarosa]

Jesus Dimaala, hi, check mo ito, kzbin.info/www/bejne/h5POoH2dg8Z8jtk

[@efmaranion]

Saan ang excel file at staad file? Di ko makita sa link Sir.

[@alfredangelomendoza6139]

ask ko lang bakit di nyo po nilagay reduction factor bago po mag proceed to this. nung naglagay ako nag failed po sa drift. e bat po yung mga column po ng 2 storey sa mga residential e madalas po maliit lang naman yung column ano po ba madalas ginagawa para maliit lang column dimension.

[@carmzan7253]

Hi po, patulong naman po, pwd po mag ask ng load combo ng ACI 318?

[@tongpi9305]

hello mga lods pabigay nman ng load combination ng ACI-318

[@marcosy4816]

sir paano ioffset yung footing? lalo na kapag firewall yung side..?

[@jpdelarosa]

hi ian, meron tutorial dito, kzbin.info/aero/PLvhEcB0cc8CI49kWcL9pGqUAS5VrGV4Ya

[@ferweenronanquizon1857]

HI SIR, PANO PO MAG OFFSET SA RCDC?

[@sheenaga2228]

Good evening po sir, pwedi po makahingi ng load combination sa ACI-FOOTING. Di ko po ka alam kun san ilalagay ito. Salamat po

[@vonmeneses5242]

goodmorning po sir, may update po ba kayo sa table dito na laman niyo na po ba

[@jeanmaravillo1028]

Sir, pwede po makahingi ng excel file na gamit niyo? salamat po.

[@byenvillanueva464]

Pano po mag avail ng rcdc license?

[@kimadia2995]

Sir, "Licence of design Code is not found" ang nalabas sa akin pag nagoopen ng RCDC. Anong gagawin ko po pag ganun?

[@jerrymartejr]

download ka ng patch for staad pro

[@jonercenido2376]

Bakit yung bar size sa rcdc 13, walang 12mm? Pano ako maglalagay ng 12? Yung sa concrete walang C24 pero pwede lagyan.

[@janelrryramirez9113]

oo nga tol. na solve muna to na issues? nag fail ung ibang members sakin. same model lang naman ung ginamit ko. ano ito bug sa software?

[@jerrymartejr]

akin din lol

[@ajrlicerio1566]

Refer to Sir Odz Pingol comment above sir.

[@jerrymartejr]

@@ajrlicerio1566 ano comment nya? Di ko makita

[@ajrlicerio1566]

@@jerrymartejr Right click mo yung box sa baba ng Rebar Number then switch to Rebar Diameter

[@markgeraldregala4150]

sir pwede po patingin ng nilagay niyong auto load rules sa aci-318 at aci-footing di ko kasi nakita sa video thanks in advance :)

[@jpdelarosa]

Hi Mark, dowanload mo dito, www.dropbox.com/s/7l1q2fz2peu0vm4/NSCP%202015%20load%20rules%20for%20footing%20design.rar?dl=0

[@jujujiji8634]

same po ba don sa nilagay nyo sa Concrete yung auto load rules?

[@tongpi9305]

pabigay nman po ng load combination mga lods ng ACI 318

[@kokushi333]

@@jpdelarosa Sir, dropbox file deleted na po

[@jeromesy4219]

Sir, pde po mahinge yung model po neto? Thanks

[@jpdelarosa]

Hi John, nandito lahat ng files pati loadings, www.dropbox.com/s/0ztxndbo7vgu74b/2%20storey%20residential%20bldg%20-%20%20NSCP%202015.rar?dl=0

[@jr-vb3zo]

Hi John Jerome, pwede po makahingi ng file nito sayo? thanks po

[@sheenaga2228]

Sir pwedi makahingi nito? Wala na kasi jan sa link na sinend niyo. Salamat po

[@terentedu9924]

Hi sir, wala na po yung link ng files po, pwede po makahingi ng files? Salamat po

[@markjayarmario1145]

Saan po pwedeng mag-download ng STAAD Advanced Concrete RCDC? Thank you po.

[@jpdelarosa]

hi mark, request ka sa bentley, www.bentley.com/en/products/product-line/structural-analysis-software/staad-advanced-concrete-design

[@paolomaano9302]

Sir sa pagrequest po ba kailangan ng structural enterprise license?

[@jpdelarosa]

Hi john paolo, yes structural enterprise

[@paolomaano9302]

Thank you Sir. Newbie pa lang ako pero ang dali matuto from your walkthroughs.

[@jujujiji8634]

sir pwede po ba pa share ng staad editor ng sample mo, yung sakin kc nag fe fail mga beams ko sa rcdc

[@janelrryramirez9113]

akin din nag fail. paano mo na ayos ?

[@jerrymartejr]

Ok yung sa akin. wala nag fail

[@christianmarcreyes3160]

Sir san po nakakapurchase ng RCDC??

[@jpdelarosa]

hi christian, pasend email inquiry sa [e-mail]

[@wensonhernandez3562]

Sir san po pwede mgdownload ng Staad Advance?

[@jpdelarosa]

hi wenson, request ka sa bentley, www.bentley.com/en/products/product-line/structural-analysis-software/staad-advanced-concrete-design

[@wonzyenzdollarz]

good day po, anyone knows here kung paano i fix ang error kapag " ** ERROR: NO REFERENCE LOAD CASE OF TYPE MASS/GRAVITY/DEAD/LIVE IS DEFINED FOR MASS MODELING. " Thank you po, ito talaga kadalasan kong problem, pero nasunod ko naman lahat ng nasa video tutorial na ito :(

[@ma.alelit.gaspar7857]

Good Day po sir Pahingi po kami Load combination for ACI - Footing. Thank you

[@jerrymartejr]

Makikita po sa video

[@archimedesduro3418]

@@jerrymartejr Wala po sa video

[@jpdelarosa]

For full trainings click here, facebook.com/xstructures/reviews You may order my STAAD.Pro and STAAD Foundation books on this link, From Lazada, www.lazada.com.ph/shop/xstructuresph From Shopee shopee.ph/xstructuresph download STAAD and Excel files here, facebook.com/xstructures/reviews