TX16s OpenTX Change Audio Welcome Message

[@currentXibalba]

Thanks! Those final settings adjustments to the .wav file were what I was missing.

[@kevinsteele2525]

Thank you!! Tried to follow a few others and they didn’t work. This made it so easy!

[@TahoeSteve]

Glad it helped!

[@Michael-ik3fc]

In Audacity, when saving the sound file: Find the dropdown menu in the bottom of the window and change "Project rate(Hz)" to 16000, then click the dropdown of the track and select Mono and set rate to 16000 and set format to 16-bit PCM, then click File -> Export Audio and choose "WAV (Microsoft) signed 16-bit PCM" as filetype and click save.

[@JesseFlannery]

I did this exactly because it wouldn't play. Though it did end up playing but in slow mo. Do you have any idea why?

[@chargerman2116]

Outstanding video. Just purchased the TX16S and your video's makes programming easy to understand and perform. Thanks Steve!

[@TahoeSteve]

Thanks so much. Great to hear!

[@JuuzyFruit]

This hobby is giving me the same feeling as when I was learning to build computers years ago and I absolutely love it! I did not expect there to be so much to learn when I realized I wanted to fly drones. Building stuff + computer stuff = my perfect hobby. Your videos are awesome man keep it up!

[@TahoeSteve]

That is awesome! yeah, this is the most complicated hobby I have ever embraced. so much involved. key is to be patient and know you can't know everything right away.

[@skrub6969]

thank you sir for all you knowledge you share for the setups and how to's. I just did my welcome audio.

[@gavbindley7106]

Little bit of fun never hurts my friend great video playlist lots of good advice in a clear and easy to understand way thank you very much

[@TahoeSteve]

Thank you for the kind comment and for watching

[@gavbindley7106]

Your very welcome you have helped me understand and use My new radio and I am now telling all my friends to watch your video series if they need help your a legend my friend 😊

[@elpapigrande4035]

Nice video. Going to follow these steps later on and get my welcome audio changed. I’m subscribed. Thanks brother

[@TahoeSteve]

Thanks for watching!

[@FitzpatrickCarl]

aWeSoMe!!! no messing easy instructions every video is perfectly explained. Best I have seen. Well Done !!

[@Monodon77]

Leeeeeroy Jeeeeeenkins!!!

[@jaredlewis2961]

Freaking awesome, thanks for this tutorial

[@PaulCrisafulli-if8yw]

Would poorly calibrated endpoints be a possibile cause for full throttle flip of death? Turns out my AETR were off by 15-20 under and over. And anytime I would go full throttle she would desyncs or something for a half a second and recover most times. Just calibrated endpoints with your video and will go try to recreate the issue on lunch break

[@madvette74]

I dont get a welcome to tx voice at startup, I did what you show here and still no voice prompt, I use to have a voice prompt, this video brought it to my attention that bit was gone

[@fklotaloi]

Thanks for uploading this useful video on OpenTx, a bit ambiguous, steep learning curve transmitter firmware. Finally, did like it due to its super-customizing, personalizing capability, a single radio tht fits most of th RC brands. ❤

[@keqwow1]

Ok. So if I manage to get ride of the the switch warning because I've now got my switches in the proper positions, the 10 second Hello.wav file doesn't play all the way through because the home screen pops up and cuts off the hello playback midway through. If a switch is in the the wrong default position, it will play all the way through, just like your video, and then it will say "switch warning" etc. So how do I get it to play all the way through when the switches are in the default positions, so all I have to listen to is Doc Browns voice and not some annoying "switch warning" following it?

[@jerryzito6840]

Thanks for the great video. I found great wav file. I converted to Ch1 and 16,000. Do I have to rename the hello file on the SD card, or just copy/replace?

[@HuffyT266]

Thank you! That was super easy, and well explained! I'll definitely go over your other videos about the TX16s later on. Keep it up!

[@chargerman2116]

...Steve - in following your 'Change Audio Welcome Message' video, I still cannot get my personalized message to play upon powering-up the RadioMaster transmitter. In fact, I do not receive any start-up audio now, as I removed the original 'hello' file. My custom audio file was made on Audacity - wav file,16k sample and 16-bit. The transfer from Audacity to my Download file , then into the radio was seamless. When I check the file within the transmitter (SYS, hello), it plays fine, but again, no playback upon power-on. May I have possibly deleted the audio ability from the system files, or may a switch or knob which controls the audio volume was enabled. One thought is to reload my custom audio (from U Tube, Pink Floyd - Learning To Fly intro) into that audio converter you promote. Maybe Audacity isn't changing the audio parameter as required to play on the RadioMaster. Your assistance in resolving this matter shall be greatly appreciated.

[@TahoeSteve]

Audacity must have changed something, try this instead: kzbin.info/www/bejne/pmrUf2puoJKisMk

[@chargerman2116]

@@TahoeSteve Steve, the 'hello' file is converted via your link, yet no start-up message. Again, plays fine in the SD card, SYS file. Is there a time limit to the message? Frustrating. Also, I've successfully added 8 'play tracks' for specific TX functions, yet I cannot get a 'bombs away' audio to play. Is the verbalizing of the word 'bomb' prohibited in the firmware? Thanks Steve.

[@rupman27isback]

I have a similar problem when I put my wav file.. it says error and unreadable.. is there a length limit? My audio is around 6 seconds.

[@brimsonterry1293]

Great series but I am having trouble with the Amber Sounds folder it comes up empty has it been moved?

[@jerryzito6840]

How did the word "hello" turn into that long greeting?

[@mobius-1965]

I can hear it now,your at event everyone is getting out there stuff and fireing it all up and you hear all these your gonna see some serious shit messages haha I love it love your stuff sir and you explanin it very well,allot of these guys talk to fast or bad en. you take your time and explain it perfectly without getting to technicle...

[@TahoeSteve]

i really appreciate your comment. keeps me motivated to keep making vids. thanks

[@Deathwish_fpv]

Where is a good site to find cool audio files for the welcome message on the TX16s

[@mr.j-rcs822]

Well im done but I also added music to a switch .. the problem is when you flick another switch while the song is playing it does not sound off.... you have to let song finish before the other switches audio will work.. got any ideas???? Thanks!

[@alrozanski8352]

Hi great video Steve, any specific site that you get your sound files? thx

[@theartofflying3108]

So much hassle just to change the bloody greeting.. I tried to add pictures the other day and I didn't work. Copied PNG and jpeg files of pictures in required format and size as other files there and tx16s doesn't see those in the menu. But it can see those in the as card.

[@brucerumrey8894]

very nice job on the video

[@TahoeSteve]

Thank you very much!

[@PaosElectronicDreams]

I edited the hello file with Audacity. You could get the original file on Audacity then the sampling rate will be automatically changed into the desired format. Open the original 'Hello' file and edit it, then export it as WAV(microsoft) to the dedicated folder. That's all. It will save your time. In addition, put a near 0.5 second silence at the heading part of the wav file. It will not make the 1st part of the audio stutter due to the booting lag.(click on the beginning and generate silence) You don't have to install any chrome extension at all.

[@jstagzsr]

i did exactly this but my "hello" audio is extremely quiet.. I have to stick my ear right to the speaker to hear it at all.. How do i control the volume that its played at?

[@AquaXY1]

Amazing!!! Wow Thank you Steve! you just make it so easy and FUN! Thanks!

[@TahoeSteve]

My pleasure!

[@skylinegtrv98]

WOW!! This worked great!! So glad I found your videos. I also have the tx16s and a tinyhawk 2 ....so your videos have been super helpful.

[@TahoeSteve]

That's great ro hear! Please spread the word.

[@gigatron3988]

Thanks, great videos.

[@TahoeSteve]

Thanks for watching! Appreciate the comment!

[@dustinplee5067]

I put the sd card content., in and can’t get the voice to work and we’re can I download a voice what website

[@arnoldgines3381]

Hello sir!! Great video helpful. I just wondering Sir where I can find a sound like that?? Thanks a Lot sir😊

[@crashflowfpv4841]

Is there a limit to the length of the clip you can upload? I’ve followed all the parameters here but still haven’t successfully got it to play a sound in startup yet. My clip is 8 seconds long, is that causing issues?

[@crashflowfpv4841]

Hahaha nevermind!!!!!! Got it! Your a legend! Thanks!!!!!!!

[@TahoeSteve]

Legend is a stretch, but I do try very hard to be clear and concise in my videos.

[@crashflowfpv4841]

Yeah man absolutely! Enjoyed the whole tx16s playlist, well done.

[@rupman27isback]

I dont get it.. what was your answer? lol

[@OVERKILLFPV]

When ever you say Shhhh don't tell anyone. Reminds me of Bob Ross.😁

[@TahoeSteve]

LOL.

[@jimreynolds8284]

where do i get this file docbrown

[@troyholio4997]

Thank you for this :)

[@TahoeSteve]

My pleasure!

[@rupman27isback]

Now is there a way to turn off the annoying switch warnings?

[@TahoeSteve]

yes

[@rupman27isback]

@@TahoeSteve How? That would be awesome. Thanks

[@robertracing4729]

Nice video bro

[@johndd8186]

THANK YOU!

[@96Reki]

I went... good morning sempai hahahahaha

[@ror-ys3qp]

what about exit sound

[@jheeltcharls]

Toppp Bro Thanks

[@DrDiff952]

If you do a search for " Open TX 2.2 Amber Sound Pack" you can find a much better voice for your Open TX powered radio. She has a great voice and quite a good sense of huor. One file asks ,"Was it mean to do that!" Another says ,"Well SH**!" And yet another says, "Your FU**ed" If your radio uses Open TX operating system, you can Use the Amber Sound Pack! It comes in a .rar format. So you need a .rar extractor No need to convert Audio formats

[@TahoeSteve]

LOL, talked about the Amber pack in my Sounds video. I love those voices.

[@DrDiff952]

@@TahoeSteve i love her options for when you crash!