This is why we need you. The things you caught I never noticed!
@txtoolcrib Жыл бұрын
I did forget to mention the geometry changes to the plier head though. Oh well, you and others highlighted that.
@MrTedWillard Жыл бұрын
@@txtoolcrib @maxlvledc Fun to see two of my favorite EDC youtubers having a conversation.
@JacobThomas-kk1jk Жыл бұрын
Yeah
@tomturbuckle0076 Жыл бұрын
Great that you guys converse with each other. Some watch espn sports coverage. Others listen to you guys on the state of multitools.
@JacobThomas-kk1jk Жыл бұрын
I choose multitool
@walkerg.6961 Жыл бұрын
I’m not exactly sure why, but I felt compelled to comment, I’m new to the multitool space and have been doing a lot of research on them and picking up my first one. I went with the free P2. I know a lot of people don’t seem to like the loose action as you mentioned in this video, but I thought I would share a different perspective. I have cerebral palsy and my left side is very dominant compared to my right, so much so that my right hand in some cases can be useless, depending on what I’m doing. The fact that the P2 exists, and everything can be done with one hand because of its “looseness“ is a major upside. I’m sure that I’m not the only one, but I thought I would share as somebody that’s part of the disabled community. Great video. Nonetheless, you seem very knowledgeable in this space and I very much enjoy your videos. Please keep it up.
@frogturtle Жыл бұрын
this is hands down the best review of this tool by a huge margin. not just the typical “it’s so pretty and has magnacut wow” but I actually learned a lot about this tool (and hopefully the same features on the upcoming arc) from your video. subscribed.
@txtoolcrib Жыл бұрын
Glad to have you aboard, and thank you.
@watchncarry9593 Жыл бұрын
I always enjoy that you go into detail about the form and function of each tool. As well as their practical applications. Nice work, as always. Thank you
@adamimberti6948 Жыл бұрын
These are some of the best reviews of anything I've seen. I'm a knife guy looking to get a multitool and I'm very impressed with the pacing and level of detail in his reviews. 20+ minutes. No rambling, all detail and it all blows by very quickly. Also, if Leathermans next flagship was this exact model in a base black oxide or stainless finish, and a premium version in the colours this came out in they would sell about a billion of them.
@achilles0686 Жыл бұрын
Wonderful review Ben. Thank you
@ZapWizard Жыл бұрын
I agree with everything you put out there. I put the Chisel edge into the "FREE Z1" rendering I posted on Reddit a year ago, and I plan on adding that feature myself with a grinder. Otherwise it's the perfect tool for myself. Also I loosened my hinges to match the P4, and I bent the bit driver spring to hold the bit stronger.
@txtoolcrib Жыл бұрын
Nice to see you. Love your stuff!
@dennisvazquez2140 Жыл бұрын
You would think Leatherman would give credit to its customers when they steal an idea from one of their fans/customers and they probably would if they had not been taken over by organized crime like so many other good American companies and families.
@ZapWizard Жыл бұрын
@@txtoolcrib A word of warning: The garage 5 has high strength thread locker, instead of the medium strength used on the P4. Just stole the stand-off from my P4 after ruining the torx on my Garage 5. Video tear down coming soon. (I had to in order to make my 3D model)
@txtoolcrib Жыл бұрын
Thanks
@tomturbuckle0076 Жыл бұрын
Great review. That point of how they have the ingenuity to intergrate the micro driver and bit driver together is a great point. The Arc is definetly that way the Free series should have been.
@Mr.deacle Жыл бұрын
This is a fantastic in-depth analysis, thank you! Even for people who missed out on the Garage 5 like myself, this is really good info for those considering buying the ARC when it arrives. I use a serrated blade too, so if I got the ARC I'd probably carry a separate serrated pocket knife. The leaked Korean market 3D render we've seen of the ARC shows a longer file, shaped more like the wood saw instead of having a flat tip. No idea why the Garage 5 doesn't have that, maybe the pointed tip was somehow annoying to use. I do really enjoy the chisel tip on the Gerber Dual Force's file, surprised we don't see that more often. The 3D render also shows a properly pointy awl. Of course those are just renders, not the finished product. We might have to stick with the Free series awl but I'd prefer something pointy. Zapwizard made some additional fan-made renders but even the original showed what I'm talking about.
@MicahsRants Жыл бұрын
Great video brotha 🤙🏽I just picked up my ARC from Bass Pro Shop this morning in the rain. Only ARC within 100 mile radius
@SoCalFreelance Жыл бұрын
+1 for actually using the can opener tool on more than one occasion.
@usarchitects Жыл бұрын
Ben I love your videos. Unfortunately this batch ended up mostly on Ebay scalpers’ hands, leaving the collectors empty handed. Will wait for the “commercial mass production version”.
@txtoolcrib Жыл бұрын
I hope the rumors are true and we finally get a production model that comes out of the Garage. I want everyone that wants this tool to be able to enjoy it.
@dennisvazquez2140 Жыл бұрын
I love both of your attitudes.
@kennywheelus6857 Жыл бұрын
Hello Ben,congratulations, sorry you had to pay a higher price, bit at least you got one,I'm waiting for the Arc to come out, thank you an in depth review of this tool,there's only a few videos of this at the moment, I definitely love that new blade an thumb stud,an exactly, I won't replace my surge,but both them combined as a duo,oh man awesomeness, I'd love too see if Leatherman offers that blade sold separately for people who want to add it to their other favorite multitools if they have a version for each model or make a premium version that this new upgrade blade steel is on all Leatherman tools here on out,I personally think it was a grest idea an about time,I hope they keep going this route on their future tools an continue to get even better,maybe pricey but worth it in the long run because you'll have a grest quality dependable tool.
@Makeitcount-ik7sd Жыл бұрын
It would off been nice to see the eyeglass tool be able to hold an exacto blade, even if proprietary blades were needed. Great video as always
@FreedomFox1 Жыл бұрын
Thanks for showing the bent piece, holding the bit in place. That’s going to be especially helpful when using the hammer surface. A design flaw of the GOAT tool is that the bit comes loose any time you hammer. Glad to see LM thought of this for the Arc!
@JamesMBC Жыл бұрын
The Free P4 is my favorite multitool, as it is fantastic for outdoors bushcraft and emergency situations, given the one-hand operation. In the woods, there are no metal shavings, and there is no need to have dozens of scredriver bits (in fact, it's the most useless tool in the woods).
@singingtoad Жыл бұрын
Thanks very much for this very detailed review. Take care and Cheers!
@txtoolcrib Жыл бұрын
You’re quite welcome. Glad I was able to finally get one.
@tokyonfrommars Жыл бұрын
So glad to see you back, your analysis are always objective and fair. Thanks for the video have a nice day
@txtoolcrib Жыл бұрын
Your compliment is very much appreciated, thank you.
@johnkraemer5505 Жыл бұрын
Great overview! I agree with your improvements! I would love to see those improvements implemented! Thank you!
@jasonswitzer1748 Жыл бұрын
So…. The main reason to get this (or the upcoming Arc) if you already own a Charge is because you really like having all the tools on the outside of the frame. Is that it? They seem to have nearly the same toolset (this has the combo box opener flathead/cap lifter, while the Charge has a serrated blade). Any comments on why someone might buy this or an Arc over a Charge?
@irawolf Жыл бұрын
What a great review! I subscribed after seeing it. I am one of the lucky ones to get this tool directly from Leatherman, and it’s a keeper!! 😊 After manipulating everything about hundred times to break it in, I used fine Arkansas stones to smooth out the locking notches for the plier heads and the oval opening cutouts for the file and saw. (I do this to all my Leathermans to take the bite out of opening them.) One change I would like to do is replace the micro screwdriver with a lanyard ring like the one on my Wave 1st gen. A paracord loop makes the tool easier to grab out of a pouch without interfering with the pliers, and I can easily lock the loop to a carabiner. Looking forward to seeing more of your videos! Oh yeah, the blade is SHARP, Spyderco sharp! It took a trip to urgent care to finally stop the bleeding from my finger tip. 😂😂😂
@txtoolcrib Жыл бұрын
Holy smokes, hope you’re okay! Thanks for your subscription.
@txtoolcrib Жыл бұрын
You should check out ZapWizard’s breakdown and mods. kzbin.info/www/bejne/f3rGoa2IoNWEo9U
@irawolf Жыл бұрын
@@txtoolcrib I’m all good now, thank you! SurgiFoam is my new friend. It works when there’s nothing to stitch. Yes, the blade is that sharp!
@irawolf Жыл бұрын
@@txtoolcrib Watching ZapWizard… Uh oh, you just sent me down a new rabbit hole! :-)
@LupinxJigenTTV Жыл бұрын
Awesome video! As a guy that only used a Fuse and a Wingman for work its amazing to see the new premium designs from them. The Arc is gonna be awesome if it has these features.
@EriclesMH Жыл бұрын
You mention the tool is generally tighter, is there play in any of the implements aside from the pliers?
@dieselgoinham Жыл бұрын
The GOAT of leatherman reviewers
@txtoolcrib Жыл бұрын
That might be stretching it, but I appreciate it nonetheless.
@xderiwx Жыл бұрын
For those of you who have tightened up your P2/P4, ARC or Garage 5 handles, does Leatherman apply any loctite to these out of the factory? Just curious before I dig into mine to try and tighten them a bit. Thanks!
@alexkerheadАй бұрын
Thrilled I waited for the ARC and passed the Garage. Pretty, but has a couple of issues the P4 had. Leatherman is listening for sure. Took them long enough. Bought 2 P4s and a P2 in 2019. Both dateless. The one I carried did OK, but I missed a Charge TTi I got stolen from me in 2019. Have several Charges(TTis = 4 alone - 2 early gorgeous scaled versions, one I carry some days, and one for the collection) now, but at the time I was struggling a bit. Put P4(2019) cutters in my ARC. Perfect. Loving the ARC.
@alexkerheadАй бұрын
I bought two ARCs for $199.99 each NIB. Wish I could have gotten in for the first year release, but I'm OK with both of mine being April 2024. The Magnacut is nice, as I missed my S30V in the TTi.
@steventaylor4867 Жыл бұрын
It's nice to see you got that one in your in your collection 🤗
@txtoolcrib Жыл бұрын
Thank you very much.
@p4inmaker Жыл бұрын
Looking forward to the arc, I hope it gets the pivot screw, it'd be a gamechanger. But I'm not looking forward to its price. I also agree with the chisel grind on the file, it's the only thing this configuration is missing in my eyes. Could have put a small ruler surface on one of the frame sides too, I guess.
@JJ9763 Жыл бұрын
I should also add that Leatherman could do so much more on this tool (and others) with the same thoughtful application of the approach used on the pry bar/package opener - adding the cap lifter to the same blank. It's the same principle in adding a chisel to the file. Or your suggestion to combine the bit drivers. Why not put a wire stripper on the base of aul... and make it a depth gauge too? I have to believe a combined can opener/cap lifter is possible with some savvy thinking. Space is at an extreme premium in these tools, the blanks should get a major TLC overhaul to each serve two or three purposes. One last item in the off chance Leatherman reads these comments; can we get a combined Torx/Robertson bit option please? :)
@naturecalls3465 Жыл бұрын
This a great comeback from Leatherman. They just showed that they still got It.
@greekveteran2715 Жыл бұрын
Nah,Leatherman has gone downhill in quality a long time ago. They now make them look cool,but in terms of quality they suck. I git a collection of brkoen Leathermans,while all my Victorinox,are good as new and they also scream quality. Spirit X,offers more utility,so more uses + higher quality = way better tool.
@kennogawa6638 Жыл бұрын
Looking forward to your Arc review when it comes out.
@mgtowanonymous31204 ай бұрын
*ITS NOT BECAUSE "THE PIVOT IS TIGHTER".* *IF YOU LOOK CLOSE THEY ADDED RUBBER PIECES THERE PURPOSLY TO REMOVE THE BUTTERFLY ASPECT.* *ITS NOT HIDDEN EITHER.*
@fufimi66604 ай бұрын
are you talking about the rubber where the handles meet the head ? those are so the handles can lock into place, they are present on the p2/p4 and if you loosen the pivots the 005 flips open just like the p2/p4
@MrMcbeardson Жыл бұрын
I was hoping you would get one!
@patrickbledsoe2176 Жыл бұрын
I've been waiting on this review, etsy sells a adapter for the micro driver to fit in thr bit driver
@txtoolcrib Жыл бұрын
I hope it was worth the wait. I would have loved to have been able to get this video out sooner.
@waluigiinsmashbros Жыл бұрын
They need to take the little file on the P4 and turn it into a small hooked serrated blade. Would be great for rope and cordage to save the edge on your main blade. They could put it on the ARC in place of the micro driver.
@txtoolcrib Жыл бұрын
That’s not a bad idea.
@kokoymedina3441 Жыл бұрын
Very well reviewed sir its just another simple lleatherman tool the only upgrade is the magnacut knife blade........
@gharel396 Жыл бұрын
I think they're calling it a striking surface for the garage release because the warranty isn't as all inclusive for those. It's definitely not good for the mechanism to be whacked right at the pivot.
@brenteverist3701 Жыл бұрын
I hope with the arc has the adjustable plier head and hopefully that fixes the lock up issue. I hate using my free p4 pliers. With that thing costing as much as a surge I shouldn't have to tinker or fix after every use.
@Bayshore958 Жыл бұрын
I replaced a lost P4 6 months ago and the new tool has clearly been built to higher tolerances. It's very similar to the Garage you're presenting now.
@txtoolcrib Жыл бұрын
That I didn’t know, I appreciate the input. That is very helpful.
@NiSE_Rafter Жыл бұрын
Have you tried after-market thumb studs for the surge and charge? There's a few options for sale or you can even 3d print your own.
@txtoolcrib Жыл бұрын
I have, I also have some new ones coming for review along with a few other items.
@appleztooranges Жыл бұрын
Thought you didn’t get one! I’ll wait for the arc!
@txtoolcrib Жыл бұрын
Had to buy a scalped one
@appleztooranges Жыл бұрын
@@txtoolcrib I can’t spend it haha! Their $600 on Reddit the other day
@toomuchmollie Жыл бұрын
Why are they still putting “can openers” on multi tools?
@appleztooranges Жыл бұрын
I miss the serrated blade knife!
@markdotson607 Жыл бұрын
I wish that they put in the tee shank adapter then you would have it all!
@RandomGuy-qm3mg Жыл бұрын
can't wait to see the Arc, hopefully they some of the improvements you suggest. Wonder if a regular bit driver would fit in the space currently used by the micro driver and their proprietary driver?
@WatchmanNiel Жыл бұрын
I’d never use this, be to sorry for it, it’s a safe queen for sure… I really hope the ARC also gets the spring loaded plier mechanism.
@Spanky8402 Жыл бұрын
@Leatherman, you need to reimburse this guy for releasing a limited product, especially since he says alot of good things about your products. I hope they see this, especially since you had to pay scalper price for this. As soon as I heard you say that you paid after market price for this, I had to write this. I can't wait to see what you say about this multi tool. Your awesome for doing this.
@merkyworks Жыл бұрын
Wish I could have snagged one of these
@patrickandjamieohollaren4350 Жыл бұрын
Why feature a tool that you can't buy?
@daifeichu Жыл бұрын
I've never seen the Free series in person so I didn't know it had that pummel function on the end. I've done a little "tap tap" with my mt's over the years but don't like doing it for fear of ruining them. I hope that will be included with the Arc. Great review as always.
@GarrettRockey Жыл бұрын
Do the internal tools pop out when you snap the pliers into the open position? If not, do they pop out if you use the wire cutters?
@txtoolcrib Жыл бұрын
No they do not, it goes back to the better tension the pivots have out of the factory. Now I’m sure given the right circumstances that could happen, but it would be rare.
@paulbyland Жыл бұрын
On the Leatherman Tool User group on facebook, I speculated that Leatherman included that little L shaped piece of metal because they were having trouble with the bit falling out if the tool was dropped. Someone else said they thought it was there because it might fall off if you used the back of the pliers as a hammer. Then a Leatherman engineer piped up and told us we were both right! I wonder why they redesigned the bit holder. Perhaps so it's easier to change one handed?
@txtoolcrib Жыл бұрын
That’s an interesting question. I don’t think that is one area where I would be concerned about exchanging bits one-handed. Of course that is my own personal opinion. It’s tough to say what their mindset is there. You may in fact be absolutely correct.
@lighteningwawa Жыл бұрын
With the micro driver, they can also just make a bit that has a 1/4" base and a micro tip.
@JJ9763 Жыл бұрын
I'm not a big commenter on this platform but HAD to come out of lurker mode for this. +1 on the following, which I noticed early and can't believe they didn't do (chalked it up to them using bins of parts cut for previous gen tools): - Longer file (with chisel, why wouldn't they?) - Longer scissors - Pointed aul (but with an eye please) SO much was done right with this one, it's damn near perfect. Now just make a mini version on this same platform to fill the void left by retiring the Squirt and Style (outside accessible tools)!
@txtoolcrib Жыл бұрын
There is a void in pocketable sized multi tools. I hope Leatherman addresses this soon.
@miguelcabral1836 Жыл бұрын
This and the Air Force, style multi tools, are right up my alley. Despite all the tools I own (which are actually few), I had a girlfriend, for a few months and forgot how expensive, that was (not joking, in the slightest). Now that she’s flown, the coop, hopefully, in 3 or 4 months, I’ll be able to afford something like this, again. I forgot how good it feels and how rich you feel, when you’re, your only dependent. Also, I’m not in the Air Force, before anyone chews my ass 😅
@ger13nunyah56 Жыл бұрын
This is the way
@oorcinus Жыл бұрын
No bit holder is the reason i never picked up a P4 and never will. The fact they finally put it in, but in an extremely limited edition seems like a further slap in the face.
@shadowjezzter Жыл бұрын
I cant wait for the arc, i love my p4, but i would like an upgrade to the old gal.
@willb3018 Жыл бұрын
I would never buy a multitool without checking to see if TTC reviewed it. Not saying I wouldn't but it, just that I would make sure I saw his review if there was one. Sorta like I turn to Project Farm reviews for just about everything else.
@txtoolcrib Жыл бұрын
I appreciate that, thank you.
@TommiHonkonen Жыл бұрын
if i had to guess that is not stamped is laser engraved
@sterlingarcher46 Жыл бұрын
I just really hope the Arc won't sell out in a matter of hours , not to reappear in stock for another 6 months or so ...
@david.leikam Жыл бұрын
I still prefer my blackened Leatherman Surge. 👍
@txtoolcrib Жыл бұрын
I’m with you. I gotta say though, the blade and spring loaded pliers are very nice!
@david.leikam Жыл бұрын
@@txtoolcrib / True, though I’m not a collector and the Surge is a great tool, that I have.
@20cent Жыл бұрын
Painted frame and Cerakoted blade = damaged after a day in the pocket, and same with the blade for anything more than cutting an Amazon envelope. So it's just a "collector" item meant to stay in its box (or to be shown by influencers for that FOMO moment).
@txtoolcrib Жыл бұрын
I agree. I wouldn’t want those DLC coatings on a production model personally.
@MrZachzippo Жыл бұрын
I find you comments regarding the metal filings, but I'm sure you don't but the tools away covered in grease, oil and others work area residues that are not magnetic
@Locoedc909 Жыл бұрын
Hey brother what's going on! How yall!! Doing?? I am happy for you that you were able to get your hands on one of those Leatherman multi tools i am sorry that you had to pay a pretty penny! Now with that being said! Will you be using this tool as a EDC tool once in a while? Or are you going to just put it away for safe keeping?? Since it did cost you a lot of money¡!
@txtoolcrib Жыл бұрын
Thank you. I won’t edc this one, waiting for the Arc to see how I like carrying it in off hours.
@Locoedc909 Жыл бұрын
@@txtoolcrib I don't blame you on that one! I wouldn't EDC that either.. it is just one of those tools that you just keep in the collection! And also I am waiting for the Arc as well I will definitely be EDCing the Arc.. that is if I can get my hands on one because I am sure it is going to sell out really fast since everyone wants one of those so we will see how long it takes Leatherman to get up and bring more in as they run out.,. well you have a great day and God bless you Mr Texas
@juakored Жыл бұрын
Despite it's flaws, it's a pretty cool looking multi tool.
@TokyoXtreme Жыл бұрын
I remembered the Alamo, so here I am.
@ruaanaudi7496 Жыл бұрын
You have such good ideas but there is no way leatherman can integrate those within the arc given that they are probably already producing them to be ready for the October launch. Such a pity.
@txtoolcrib Жыл бұрын
That’s true. In fact I hope they have an abundance of Arc’s ready on launch day. I’m getting tired of showing multi tools with limited production runs.
@ruaanaudi7496 Жыл бұрын
@@txtoolcrib garage 005 is a great tool especially after the dumpster fire that is the initial Free series, but I look forward to having the 25 year warranty with the arc so that I can use it without having to worry about breaking it.
@JohnnyG2573 Жыл бұрын
So jealous!
@igoreOO7 Жыл бұрын
Looks nice. But still I like my old Surge better
@randymelissabutton2159 Жыл бұрын
This might be my next tool!! It has a lot of the same tools I like in my EDC, Charge+. The scissors on anything but the Surge and Micra made by Leatherman is just not very good. I'm not sure how even the smallest Victorinox can make a sharp pair of scissors....
@Tapionski Жыл бұрын
Not a fan to how the bit driver sits and how lose it is. If not for that this would be the best LM tool.
@OliverHinz Жыл бұрын
Finally
@txtoolcrib Жыл бұрын
I certainly wish I could have gotten my hands on it sooner.
@OliverHinz Жыл бұрын
@@txtoolcrib i am 100% sure you did. I would be crazy enough to use it as a tool if I would have gotten my hands on one, but there was no slot in Switzerlabd
@greekveteran2715 Жыл бұрын
Victorinox Spirit X , still the best! Last Leatherman that I liked, even though it,s quality was junk,was the Wingman. Leatherman has gone downhill a long time ago. Victorinox on the other hand, always offers more utility and WAY higher quality.
@petrvodkin5824 Жыл бұрын
A5D9 - is it #1549?
@txtoolcrib Жыл бұрын
I believe that is correct
@1970jeebee Жыл бұрын
Mine ends with Z0F8, any idea what nr. Should that be. The whole code is BO5T23ZOF8
@txtoolcrib Жыл бұрын
My guess would be 0068, the 68th tool produced of the 1983.
@1970jeebee Жыл бұрын
That is what i just was thinking since the z, wich is 26, is not possible. I bought this one in Europe, the Netherlands
@1970jeebee Жыл бұрын
That s a nice low nr.😂
@EDHBlvd Жыл бұрын
Damn I was all hyped for the new bit exchanger, but seems the new design is inferior to older designs. 2 steps forward, 1 step back.
@RP-dy5mu Жыл бұрын
Isn't this thing just the Leatherman Arc? With an additional price tag because it's super special edition (tm)
@jhgindia Жыл бұрын
Late but solid review.
@Genesis992 Жыл бұрын
I really like mine! I don’t ever really have a need for a saw, so a serrated blade would have better, in my opinion. That being said I get why there’s a saw on it. If it wasn’t a special tool, I’d switch the saw with a P4 serrated blade
@Genesis992 Жыл бұрын
Also, one million percent agree with lengthening the file and putting a chisel tip on it
@txtoolcrib Жыл бұрын
Good to see you again. You were one of the lucky ones huh?
@Genesis992 Жыл бұрын
@@txtoolcrib been lucky enough to not miss one yet! I do wish they’d pick more durable coatings or coloring options. If they had, I’d maybe not mind actually using #5
@txtoolcrib Жыл бұрын
@@Genesis992well hopefully the Arc will be just as well designed!
@Genesis992 Жыл бұрын
@@txtoolcrib agreed! I fully intend on having the Arc be my primary carry once it’s available. . . If the toolset is similar to #5
@Phlfwlr11 ай бұрын
Looks like the same knife shape as the Signal just not serrated
@jeremyrood5020 Жыл бұрын
Leatherman made the Garage series for this exact feedback. And with the Arc coming soon and being very similar to this tool, I wouldn’t be too surprised if they incorporated some of this ideas into the new tool. I thank you for getting your ideas voiced and experience behind your thoughts on each little detail.
@MrSixxshooter Жыл бұрын
Why did they not add a chisel to the end of this file ? Just like Gerber did with there Dual force multi tool . That to me is a big miss . The chisel is very popular on the Victorinox Swiss tool as well. Heck ! They even had a chisel at the end of the serrated blade of free p4 . 😤 big mistake .
@chrismitchell60012 ай бұрын
Whats the point they dont even sell these anymore. If i could sell any multi tool for hundreds of dollars i would keep it around as long as i could.
@monkeylife2318 Жыл бұрын
I don't think we should give all our hopes on the A.R.C. Especially if we think it will fix every flaw in every LM model😅. Regarding this one, it is inadmissible at this price to have such imperfections, and the choice and design of each tools is really questionable. The SURGE v2 remains the best for its file/saw modularity which allows you to have a serrated blade at the same time!!!. Better do a Surge v3 more modular as the GOAT. LM will be eaten by competitors at this rate. Just my 2cents.
@JewishBanker420 Жыл бұрын
Send it back for warranty repair you have fautly hardwire cutters. You should NOT have any gap at the bottom!!
@konnorwerth4906 Жыл бұрын
Hopefully the arc isnt spring loaded and has a 420 hc blade
@robbowman5857 Жыл бұрын
Totally agree with the micro driver observation. I don't see the need for it to be in the tool permanently. The small amount of torque you need means a plastic bit with a hole that fits in the normal bit exchanger should be plenty strong enough. You could even use it on its own. I have drilled a hole in the bit card down through the handle tab at the top to accept the micro driver, as I too use the Surge and it doesn't have the holder in the tool. I know there are a few tricks to insert it into nooks here and there but I think they are cumbersome and remove the precision feel by saddling it to the big heavy tool
@garrisondelgado7386 Жыл бұрын
I will say, to my fellow leatherman users who don’t use the serrated blade, O used to be like you, but if you rly use it and know when to use it, it is extremely useful. I use my surges serrated blade more than the standard blade. Perfect for man made materials.
@GityaLIVEdnb Жыл бұрын
prying tool / chisel end on a file is a bad idea. files are rigid and shatter. you dont wanna apply bending force to it
@mu99ins Жыл бұрын
The knife for multi-millionaires. How to afford it, in 2 easy steps. 1) Become a multi-millionaire 2) Buy the knife.
@JewishBanker420 Жыл бұрын
Your special limited edition has a fatal flaw, you have a gap in the hardwire cutters, at the base of the tool and the pliers base. If you cut a coat hanger, your limited edition tool is trash. It will chip, you have the gap. Same as my Arc and nearly everyone else. Leatherman has fallen!
@piotrmarczak3733 Жыл бұрын
The other thing is wood/plastic saw. LM is completely inferior to those from Vic. They cut only one direction, but they are short and stiff enave to cut both directions. In my opinion LM cheat people. Swiss made means 70% parts are made in Switzerland. I think that 90% of LM products are made in China and mounted in USA.
@JamesMBC Жыл бұрын
Why does Leatherman do their best multitools in limited runs?! If we want to give them our money, why won't they take it? The comercial multitool world has been stuck with 420HC blades for decades, whereas in the knife world, 420HC steel is considered a joke (rightly so: no powder metalurgy process, low hardness, etc). What does a guy need to do to not get the same old sub-par materials in a multitool, without having to be selected via Leatherman's artificial scarcity "Aniversary Editions"? At this point I'm convinced that Leatherman got too comfortable with the relatively low competition, they stopped caring about providing the best tool for their customers a long time ago, instead just providing "a tool". A 420HC-level tool, to be exact. So they can keep their unfair exclusive stuff. Soon new companies will refine their own offerings, and when Leatherman realize it's time to step it up, they will be too far behind. A good example is the GOAT Multitool brand: they focus on modular multitools where the user picks exactly the tools they want, even allowing users to get an S35VN blade without any sort of exclusivity BS. Their multitools are still somewhat behind in terms of overall features and refinement, but that will improve over time as they gain experience. And once they reach the same quality and refinement than Leatherman, but with their modular concept, Leatherman will be in trouble. People won't need to pick one or two models for their combinations of tools, they will just buy what they need, not more and not less. And we'll remember how Leatherman tried to sell us more tools by creating specific, non-modular models.
@Quentyn73 Жыл бұрын
LM can keep this. This is outdated design. They are a dinosaur of an era long gone. Instead of allowing customers to fully customize their mt's they output a short cosmetic update every 10 years. It's a ridiculous company with bad product, way overpriced and completely useless.
@anthonymorelli677 ай бұрын
Gkup
@n_conway7571 Жыл бұрын
Leatherman’s weak point for me has been the 420hc steel. It’s 2023, upgrade it.
@dualsportoutdoors Жыл бұрын
They should have dumped the scissors for the file. Serrated blade is far too useful to not have on a multitool
@edwardwilliams6514 Жыл бұрын
As much as I want to watch the review, I cannot. I like many others would like one, same as two of the four previous releases, but the stupid number they make just makes it nigh on impossible for many to get. So we go without (like me) or others pay asinine amounts from ePray. It infuriates me they do shit like this.
@txtoolcrib Жыл бұрын
I completely understand your frustration. I will say though, this one might be different. The Leatherman Arc is rumored to be a very similar design to this one.
@edwardwilliams6514 Жыл бұрын
@@txtoolcrib Call me a fanboy, that's fine. I like pretty much everything Leatherman puts out. Limited edition tools at already high prices though. Annoying. I will be buying the ARC as I use my P4 religiously.
@howerpower-gaming27 Жыл бұрын
Its more or less just a white free p4 with a magnacut blade. Not to be a party pooper, but its not exactly revolutionary.
@txtoolcrib Жыл бұрын
Well that’s not even close to accurate.
@andrewjk8962 Жыл бұрын
Just a white Free P4 with a magnacut blade, and a bit driver, and a micro driver, and a diamond file, and a pair of spring loaded adjustable pliers. But sure, yeah, exactly the same.
@z50com Жыл бұрын
I missed out and I'm ROYALLY pissed off about it. Leatherman might know how to build tools but they have NO idea how to run a sale! With over 125 tools in my collection I doubt I ever buy a new Leatherman tool ever again.
@nunyafuckinbizniz Жыл бұрын
This is the road I'm heading towards.... sick of this $HIT...Willing to pay and they don't want my money.